[U-Boot] [U-Boot, v4, 35/66] rockchip: pinctrl: rk3368: add support for configuring the MMC pins
philipp.tomsich at theobroma-systems.com
Sun Aug 6 17:18:15 UTC 2017
> The RK3368 has two SD/MMC controllers that can be used from U-Boot
> both during SPL and for booting an OS from the full bootloader stage.
> While both are configured to (mostly) sensible settings from the BROM,
> additional configuration for the MMC controller is needed to configure
> it to 8bit mode.
> This adds pinctrl support for the MMC controller.
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> - removed the RK3368 prefix on the SD/MMC pin definitions
> drivers/pinctrl/rockchip/pinctrl_rk3368.c | 48 +++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
Applied to u-boot-rockchip, thanks!
More information about the U-Boot