[U-Boot] [PATCH 4/5] imx: mx6sx: select OSC as uart's clk parent

[Peng Fan]

As M4 is sourcing UART clk from OSC, to make UART work
when M4 is enabled, need to select OSC as clk parent,
24M OSC is enough for debug UART in uboot.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/mach-imx/mx6/soc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index e2ecc3a..b4ec11a 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -364,6 +364,7 @@ int arch_cpu_init(void)
 {
 	struct sched_ctrl_regs *regs =
 		(struct sched_ctrl_regs *)MF2_SCHED_BASE_ADDR;
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 
 	init_aips();
 
@@ -434,6 +435,9 @@ int arch_cpu_init(void)
 
 	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
 
+	if (is_mx6sx())
+		setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL);
+
 	/*
 	 * To resolve USB camera bandwidth issue, the patch sets
 	 * recommended AQoS setting from IC team value for peripheral
-- 
2.6.2