[U-Boot] [PATCH 1/1] arm: mvebu: ddr3_debug: remove self assignments

[Stefan Roese]

On 30.07.2017 21:54, Heinrich Schuchardt wrote:
> Remove superfluous self assignements.
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
>   drivers/ddr/marvell/a38x/ddr3_debug.c | 9 ---------
>   1 file changed, 9 deletions(-)
> 
> diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c
> index 12b5b04109..a704a3e9d3 100644
> --- a/drivers/ddr/marvell/a38x/ddr3_debug.c
> +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c
> @@ -327,8 +327,6 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr)
>   	u32 if_id = 0;
>   	struct hws_topology_map *tm = ddr3_get_topology_map();
>   
> -	mem_addr = mem_addr;
> -
>   #ifndef EXCLUDE_SWITCH_DEBUG
>   	if ((is_validate_window_per_if != 0) ||
>   	    (is_validate_window_per_pup != 0)) {
> @@ -820,7 +818,6 @@ static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr)
>   	u32 tmp_val = 0, if_id = 0, pup_id = 0;
>   	struct hws_topology_map *tm = ddr3_get_topology_map();
>   
> -	dev_num = dev_num;
>   	*ptr = NULL;
>   
>   	switch (flag_id) {
> @@ -1169,8 +1166,6 @@ int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM])
>   	u32 i, j;
>   	struct hws_topology_map *tm = ddr3_get_topology_map();
>   
> -	dev_num = dev_num;
> -
>   	for (j = 0; j < tm->num_of_bus_per_interface; j++) {
>   		VALIDATE_ACTIVE(tm->bus_act_mask, j);
>   		for (i = 0; i < MAX_INTERFACE_NUM; i++) {
> @@ -1229,8 +1224,6 @@ int ddr3_tip_sweep_test(u32 dev_num, u32 test_type,
>   	u32 reg_addr = 0;
>   	struct hws_topology_map *tm = ddr3_get_topology_map();
>   
> -	mem_addr = mem_addr;
> -
>   	if (test_type == 0) {
>   		reg_addr = 1;
>   		ui_mask_bit = 0x3f;
> @@ -1301,8 +1294,6 @@ int ddr3_tip_run_sweep_test(int dev_num, u32 repeat_num, u32 direction,
>   	u32 max_cs = hws_ddr3_tip_max_cs_get();
>   	struct hws_topology_map *tm = ddr3_get_topology_map();
>   
> -	repeat_num = repeat_num;
> -
>   	if (mode == 1) {
>   		/* per pup */
>   		start_pup = 0;
> 

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan