[U-Boot] [PATCH v3 1/1] arm: socfpga: Configuration for EFI boot on DE0-nano-SoC

[Frank Kunz]

Am 08.08.2017 um 18:22 schrieb Marek Vasut:
> On 08/08/2017 06:18 PM, Frank Kunz wrote:
>> For EFI boot GPT partition table support is needed as well
>> as the part command and also the SPL needs to fallback to
>> other boot methods after parse the SPL header.
>>
>> Signed-off-by: Frank Kunz <mailinglists at kunz-im-inter.net>
> 
> Reviewed-by: Marek Vasut <marex at denx.de>
> 
> I'd like to get a RB from Dinh . Poke me in a week-ish if nothing
> happens please.

Ok, I will do so.

> 
>> ---
>> :100644 100644 f56e45e727... 33674cf1ea... M	configs/socfpga_de0_nano_soc_defconfig
> 
> Is this garbled or is this some new/weird git configuration ?

Don't know where it comes from. I have not enabled it in my config,
guess it is some git "feature". My version is 2.13.3

> 
>>  configs/socfpga_de0_nano_soc_defconfig | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig
>> index f56e45e727..33674cf1ea 100644
>> --- a/configs/socfpga_de0_nano_soc_defconfig
>> +++ b/configs/socfpga_de0_nano_soc_defconfig
>> @@ -13,6 +13,7 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
>>  CONFIG_VERSION_VARIABLE=y
>>  # CONFIG_DISPLAY_BOARDINFO is not set
>>  CONFIG_SPL=y
>> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>>  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>>  CONFIG_SPL_STACK_R=y
>>  CONFIG_HUSH_PARSER=y
>> @@ -22,6 +23,7 @@ CONFIG_CMD_ASKENV=y
>>  CONFIG_CMD_GREPENV=y
>>  # CONFIG_CMD_FLASH is not set
>>  CONFIG_CMD_MMC=y
>> +CONFIG_CMD_PART=y
>>  CONFIG_CMD_SF=y
>>  CONFIG_CMD_SPI=y
>>  CONFIG_CMD_I2C=y
>> @@ -38,6 +40,7 @@ CONFIG_CMD_EXT4_WRITE=y
>>  CONFIG_CMD_FAT=y
>>  CONFIG_CMD_FS_GENERIC=y
>>  CONFIG_CMD_UBI=y
>> +CONFIG_EFI_PARTITION=y
>>  CONFIG_SPL_DM=y
>>  CONFIG_DFU_MMC=y
>>  CONFIG_FPGA_SOCFPGA=y
>>
> 
>