[U-Boot] [PATCH 06/12] imx: mx6sabresd: enable SPL FIT

[Peng Fan]

Enable SPL FIT. Now DM drivers are not enabled, so boards boot as before
with only the difference that loading dtb.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
---
 configs/mx6sabresd_defconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 627bf52..a9447e5 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -9,6 +9,10 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit.sh"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_BOOTDELAY=3
@@ -38,6 +42,8 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIST="imx6q-sabresd imx6dl-sabresd imx6qp-sabresd"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PCI=y
@@ -50,4 +56,3 @@ CONFIG_G_DNL_MANUFACTURER="FSL"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-- 
2.6.2