[U-Boot] [PATCH v4 3/6] power: as3722: fix ldo_get/set_enable for ldo index bigger than 7

Marcel Ziswiler marcel at ziswiler.com
Wed Aug 9 20:12:39 UTC 2017


From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an
index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL
registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use
of both. While at it also actually use the enable parameter of the
ldo_set_enable() function which now truly allows disabling as opposed to
only enabling LDOs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2:
- New bug fix.

 drivers/power/regulator/as3722_regulator.c | 16 ++++++++++++++--
 include/power/as3722.h                     |  3 ++-
 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/power/regulator/as3722_regulator.c b/drivers/power/regulator/as3722_regulator.c
index 3e1e6f1..eb4c465 100644
--- a/drivers/power/regulator/as3722_regulator.c
+++ b/drivers/power/regulator/as3722_regulator.c
@@ -69,10 +69,16 @@ static int ldo_set_value(struct udevice *dev, int uvolt)
 static int ldo_set_enable(struct udevice *dev, bool enable)
 {
 	struct udevice *pmic = dev_get_parent(dev);
+	u8 ctrl_reg = AS3722_LDO_CONTROL0;
 	int ldo = dev->driver_data;
 	int ret;
 
-	ret = pmic_clrsetbits(pmic, AS3722_LDO_CONTROL, 0, 1 << ldo);
+	if (ldo > 7) {
+		ctrl_reg = AS3722_LDO_CONTROL1;
+		ldo -= 8;
+	}
+
+	ret = pmic_clrsetbits(pmic, ctrl_reg, !enable << ldo, enable << ldo);
 	if (ret < 0) {
 		debug("%s: failed to write LDO control register: %d", __func__,
 		      ret);
@@ -85,10 +91,16 @@ static int ldo_set_enable(struct udevice *dev, bool enable)
 static int ldo_get_enable(struct udevice *dev)
 {
 	struct udevice *pmic = dev_get_parent(dev);
+	u8 ctrl_reg = AS3722_LDO_CONTROL0;
 	int ldo = dev->driver_data;
 	int ret;
 
-	ret = pmic_reg_read(pmic, AS3722_LDO_CONTROL);
+	if (ldo > 7) {
+		ctrl_reg = AS3722_LDO_CONTROL1;
+		ldo -= 8;
+	}
+
+	ret = pmic_reg_read(pmic, ctrl_reg);
 	if (ret < 0) {
 		debug("%s: failed to read SD control register: %d", __func__,
 		      ret);
diff --git a/include/power/as3722.h b/include/power/as3722.h
index cb4b188..b3dc7b6 100644
--- a/include/power/as3722.h
+++ b/include/power/as3722.h
@@ -14,7 +14,8 @@
 #define AS3722_SD_VOLTAGE(n) (0x00 + (n))
 #define AS3722_LDO_VOLTAGE(n) (0x10 + (n))
 #define AS3722_SD_CONTROL 0x4d
-#define AS3722_LDO_CONTROL 0x4e
+#define AS3722_LDO_CONTROL0 0x4e
+#define AS3722_LDO_CONTROL1 0x4f
 #define AS3722_ASIC_ID1 0x90
 #define AS3722_ASIC_ID2 0x91
 
-- 
2.9.4



More information about the U-Boot mailing list