[U-Boot] [PATCHv2 00/10] This patch set represent Marvell mvpp2 driver fixes

Stefan Roese sr at denx.de
Thu Aug 10 08:23:51 UTC 2017

Hi Stefan,

On 09.08.2017 09:37, stefanc at marvell.com wrote:
> From: Stefan Chulski <stefanc at marvell.com>
> Issues were found during internal QA phase.
> Stefan Chulski (10):
>    net: mvpp2x: Add GPIO configuration support
>    net: mvpp2x: fix phy connected to wrong mdio issue
>    net: mvpp2x: Enable GoP packet padding in TX
>    net: mvpp2x: fix BM configuration overrun issue
>    net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
>    net: mvpp2x: remove MBUS configurations from MvPP22 driver
>    net: mvpp2x: Remove IRQ configuration from U-Boot
>    net: mvpp2x: Set BM pool high address
>    net: mvpp2x: remove TX drain from transmit routine
>    net: mvpp2x: Set BM poll size once during priv probe
>   drivers/net/mvpp2.c | 187 +++++++++++++++++++++++++---------------------------
>   1 file changed, 89 insertions(+), 98 deletions(-)

All patches applied to u-boot-marvell/master.


More information about the U-Boot mailing list