[U-Boot] [PATCH] board: ks2: README: Update NAND wording

[Roger Quadros]


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

On 10/08/17 05:29, Franklin S Cooper Jr wrote:
> Traditional KS2 devices supported NAND via the AEMIF peripheral. However,
> 66AK2G doesn't use the AEMIF but rather the GPMC for NAND. Therefore,
> clarify some statements to indicate only certain devices have AEMIF and
> in other places just say NAND instead of AEMIF NAND
> 
> Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>

Acked-by: Roger Quadros <rogerq at ti.com>

> ---
>  board/ti/ks2_evm/README | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README
> index 5430c7d..a26b7f8 100644
> --- a/board/ti/ks2_evm/README
> +++ b/board/ti/ks2_evm/README
> @@ -61,7 +61,7 @@ configs/k2g_evm_defconfig
>  
>  Supported boot modes:
>   - SPI NOR boot
> - - AEMIF NAND boot
> + - AEMIF NAND boot (K2E, K2L and K2HK)
>   - UART boot
>   - MMC boot (Only on K2G)
>  
> @@ -69,7 +69,7 @@ Supported image formats:
>   - u-boot.bin: for loading and running u-boot.bin through
>  		Texas Instruments code composure studio (CCS) and for UART boot.
>   - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
> - - MLO: gpimage for programming AEMIF NAND flash for NAND boot, MMC boot.
> + - MLO: gpimage for programming NAND flash for NAND boot, MMC boot.
>  
>  Build instructions:
>  ===================
> 

-- 
cheers,
-roger