[U-Boot] [PATCH v2 06/10] doc: overlays: Tweak documentation regarding overlays
Pantelis Antoniou
pantelis.antoniou at konsulko.com
Fri Aug 11 08:52:44 UTC 2017
From: Franklin S Cooper Jr <fcooper at ti.com>
Pull some information regarding overlays from commit messages and
put them directly within the documentation. Also add some information
regarding required dtc version to properly use overlays.
Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
---
doc/README.fdt-overlays | 85 +++++++++++++++++++++++++++++++++++--
doc/uImage.FIT/overlay-fdt-boot.txt | 8 +++-
2 files changed, 87 insertions(+), 6 deletions(-)
diff --git a/doc/README.fdt-overlays b/doc/README.fdt-overlays
index ee868ec..39139cb 100644
--- a/doc/README.fdt-overlays
+++ b/doc/README.fdt-overlays
@@ -1,9 +1,76 @@
-U-Boot FDT Overlay usage (without FIT images)
+U-Boot FDT Overlay usage
=============================================
-FDT overlays are now available for use even without FIT images.
-It is not as automagic as with FIT images though and require a few
-manual steps.
+Overlays Syntax
+---------------
+
+Overlays require slightly different syntax compared to traditional overlays.
+Please refer to dt-object-internal.txt in the dtc sources for information
+regarding the internal format of overlays:
+https://git.kernel.org/pub/scm/utils/dtc/dtc.git/tree/Documentation/dt-object-internal.txt
+
+Building Overlays
+-----------------
+
+In a nutshell overlays provides a means to manipulate a symbol a previous dtb
+or overlay has defined. It requires both the base and all the overlays
+to be compiled with the -@ command line switch so that symbol information is
+included.
+
+Note support for -@ option can only be found in dtc version 1.4.4 or newer.
+Only version 4.14 or higher of the Linux kernel includes a built in version
+of dtc that meets this requirement.
+
+Building an overlay follows the same process as building a traditional dtb.
+
+For example:
+
+base.dts
+--------
+
+ /dts-v1/;
+ / {
+ foo: foonode {
+ foo-property;
+ };
+ };
+
+ $ dtc -@ -I dts -O dtb -o base.dtb base.dts
+
+bar.dts
+-------
+
+ /dts-v1/;
+ /plugin/;
+ / {
+ fragment at 1 {
+ target = <&foo>;
+ __overlay__ {
+ overlay-1-property;
+ bar: barnode {
+ bar-property;
+ };
+ };
+ };
+ };
+
+ $ dtc -@ -I dts -O dtb -o bar.dtb bar.dts
+
+Ways to Utilize Overlays in U-boot
+----------------------------------
+
+There are two ways to apply overlays in U-boot.
+1. Include and define overlays within a FIT image and have overlays
+ automatically applied.
+
+2. Manually load and apply overlays
+
+The remainder of this document will discuss using overlays via the manual
+approach. For information on using overlays as part of a FIT image please see:
+doc/uImage.FIT/overlay-fdt-boot.txt
+
+Manually Loading and Applying Overlays
+--------------------------------------
1. Figure out where to place both the base device tree blob and the
overlay. Make sure you have enough space to grow the base tree without
@@ -29,6 +96,16 @@ overlapping anything.
=> fdt apply $fdtovaddr
+6. Boot system like you would do with a traditional dtb.
+
+For bootm:
+
+=> bootm ${kerneladdr} - ${fdtaddr}
+
+For bootz:
+
+=> bootz ${kerneladdr} - ${fdtaddr}
+
Please note that in case of an error, both the base and overlays are going
to be invalidated, so keep copies to avoid reloading.
diff --git a/doc/uImage.FIT/overlay-fdt-boot.txt b/doc/uImage.FIT/overlay-fdt-boot.txt
index dbdf2a1..63e47da 100644
--- a/doc/uImage.FIT/overlay-fdt-boot.txt
+++ b/doc/uImage.FIT/overlay-fdt-boot.txt
@@ -1,5 +1,5 @@
-U-Boot FDT Overlay usage
-========================
+U-Boot FDT Overlay FIT usage
+============================
Introduction
------------
@@ -8,6 +8,10 @@ of similar boards and their expansion options. The same kernel on DT enabled
platforms can support this easily enough by providing a DT blob upon boot
that matches the desired configuration.
+This document focuses on specifically using overlays as part of a FIT image.
+General information regarding overlays including its syntax and building it
+can be found in doc/README.fdt-overlays
+
Configuration without overlays
------------------------------
--
2.1.4
More information about the U-Boot
mailing list