[U-Boot] [PATCH v4 2/2] usb: net: Add support for Microchip LAN75xx and LAN78xx
yuiko.oshino at microchip.com
yuiko.oshino at microchip.com
Fri Aug 11 16:44:58 UTC 2017
From: Yuiko Oshino <yuiko.oshino at microchip.com>
Add support for Microchip LAN7500, LAN7800 and LAN7850,
USB to 10/100/1000 Ethernet Controllers.
Signed-off-by: Yuiko Oshino <yuiko.oshino at microchip.com>
---
Changes in v4:
- Delete lan75xx_read_mac() becasue it is just a wrapper.
- Add debug print the USB device number and ther port number of
the device in lan7x_basic_reset().
- Add the USB device number and ther port number to the
mdiobus->name so that multiple devices can register the PHY
with a non-unique name.
Changes in v3:
- All #ifdef CONFIG_DM_ETH and #endif are removed.
- The lan7x_eth_recv() is modifed to correctly support the Driver Model
and returns packet_en.
- Add mii_resolve_flowctrl_fdx() patch in the series.
Changes in v2:
- The wait_for_bit functions copy the real one.
- Uses phylib
- Unnecessary variables are removed
- All return values are checked
- Uses mii_resolve_flowctrl_fdx() from linux/mii.h
drivers/usb/Kconfig | 2 +
drivers/usb/eth/Kconfig | 17 ++
drivers/usb/eth/Makefile | 2 +
drivers/usb/eth/lan75xx.c | 315 +++++++++++++++++++++++++++++
drivers/usb/eth/lan78xx.c | 477 ++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/eth/lan7x.c | 499 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/eth/lan7x.h | 230 +++++++++++++++++++++
7 files changed, 1542 insertions(+)
create mode 100644 drivers/usb/eth/Kconfig
create mode 100644 drivers/usb/eth/lan75xx.c
create mode 100644 drivers/usb/eth/lan78xx.c
create mode 100644 drivers/usb/eth/lan7x.c
create mode 100644 drivers/usb/eth/lan7x.h
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index da3ec2f..62126aa 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -94,4 +94,6 @@ endif
source "drivers/usb/gadget/Kconfig"
+source "drivers/usb/eth/Kconfig"
+
endif
diff --git a/drivers/usb/eth/Kconfig b/drivers/usb/eth/Kconfig
new file mode 100644
index 0000000..14cfa26
--- /dev/null
+++ b/drivers/usb/eth/Kconfig
@@ -0,0 +1,17 @@
+comment "USB to Ethernet Controller Drivers"
+
+config USB_ETHER_LAN75XX
+ bool "Microchip LAN75XX support"
+ ---help---
+ Say Y here if you would like to support Microchip LAN75XX Hi-Speed
+ USB 2.0 to 10/100/1000 Gigabit Ethernet controller.
+ Supports 10Base-T/ 100Base-TX/1000Base-T.
+ This driver supports the internal PHY.
+
+config USB_ETHER_LAN78XX
+ bool "Microchip LAN78XX support"
+ ---help---
+ Say Y here if you would like to support Microchip LAN78XX USB 3.1
+ Gen 1 to 10/100/1000 Gigabit Ethernet controller.
+ Supports 10Base-T/ 100Base-TX/1000Base-T.
+ This driver supports the internal PHY.
diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
index 4c44efc..4b935a3 100644
--- a/drivers/usb/eth/Makefile
+++ b/drivers/usb/eth/Makefile
@@ -9,4 +9,6 @@ obj-$(CONFIG_USB_ETHER_ASIX) += asix.o
obj-$(CONFIG_USB_ETHER_ASIX88179) += asix88179.o
obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o
obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
+obj-$(CONFIG_USB_ETHER_LAN75XX) += lan7x.o lan75xx.o
+obj-$(CONFIG_USB_ETHER_LAN78XX) += lan7x.o lan78xx.o
obj-$(CONFIG_USB_ETHER_RTL8152) += r8152.o r8152_fw.o
diff --git a/drivers/usb/eth/lan75xx.c b/drivers/usb/eth/lan75xx.c
new file mode 100644
index 0000000..2839f5f
--- /dev/null
+++ b/drivers/usb/eth/lan75xx.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm.h>
+#include <usb.h>
+#include <linux/mii.h>
+#include "usb_ether.h"
+#include "lan7x.h"
+
+/* LAN75xx specific register/bit defines */
+#define LAN75XX_HW_CFG_BIR BIT(7)
+
+#define LAN75XX_BURST_CAP 0x034
+
+#define LAN75XX_BULK_IN_DLY 0x03C
+
+#define LAN75XX_RFE_CTL 0x060
+
+#define LAN75XX_FCT_RX_CTL 0x090
+
+#define LAN75XX_FCT_TX_CTL 0x094
+
+#define LAN75XX_FCT_RX_FIFO_END 0x098
+
+#define LAN75XX_FCT_TX_FIFO_END 0x09C
+
+#define LAN75XX_FCT_FLOW 0x0A0
+
+/* MAC ADDRESS PERFECT FILTER For LAN75xx */
+#define LAN75XX_ADDR_FILTX 0x300
+#define LAN75XX_ADDR_FILTX_FB_VALID BIT(31)
+
+/*
+ * Lan75xx infrastructure commands
+ */
+static int lan75xx_phy_gig_workaround(struct usb_device *udev,
+ struct ueth_data *dev)
+{
+ int ret = 0;
+
+ /* Only internal phy */
+ /* Set the phy in Gig loopback */
+ lan7x_mdio_write(udev, dev->phy_id, MII_BMCR,
+ (BMCR_LOOPBACK | BMCR_SPEED1000));
+
+ /* Wait for the link up */
+ ret = lan7x_mdio_wait_for_bit(udev, "BMSR_LSTATUS",
+ dev->phy_id, MII_BMSR, BMSR_LSTATUS,
+ true, PHY_CONNECT_TIMEOUT_MS, 1);
+ if (ret)
+ return ret;
+
+ /* phy reset */
+ return lan7x_pmt_phy_reset(udev, dev);
+}
+
+static int lan75xx_update_flowcontrol(struct usb_device *udev,
+ struct ueth_data *dev)
+{
+ uint32_t flow = 0, fct_flow = 0;
+ int ret;
+
+ ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN75XX_FCT_FLOW, fct_flow);
+ if (ret)
+ return ret;
+ return lan7x_write_reg(udev, FLOW, flow);
+}
+
+static int lan75xx_set_receive_filter(struct usb_device *udev)
+{
+ /* No multicast in u-boot */
+ return lan7x_write_reg(udev, LAN75XX_RFE_CTL,
+ RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT);
+}
+
+/* starts the TX path */
+static void lan75xx_start_tx_path(struct usb_device *udev)
+{
+ /* Enable Tx at MAC */
+ lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN);
+
+ /* Enable Tx at SCSRs */
+ lan7x_write_reg(udev, LAN75XX_FCT_TX_CTL, FCT_TX_CTL_EN);
+}
+
+/* Starts the Receive path */
+static void lan75xx_start_rx_path(struct usb_device *udev)
+{
+ /* Enable Rx at MAC */
+ lan7x_write_reg(udev, MAC_RX,
+ LAN7X_MAC_RX_MAX_SIZE_DEFAULT |
+ MAC_RX_FCS_STRIP | MAC_RX_RXEN);
+
+ /* Enable Rx at SCSRs */
+ lan7x_write_reg(udev, LAN75XX_FCT_RX_CTL, FCT_RX_CTL_EN);
+}
+
+static int lan75xx_basic_reset(struct usb_device *udev,
+ struct ueth_data *dev,
+ struct lan7x_private *priv)
+{
+ int ret;
+ u32 val;
+
+ ret = lan7x_basic_reset(udev, dev);
+ if (ret)
+ return ret;
+
+ /* Keep the chip ID */
+ ret = lan7x_read_reg(udev, ID_REV, &val);
+ if (ret)
+ return ret;
+ debug("LAN75xx ID_REV = 0x%08x\n", val);
+
+ priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16;
+
+ /* Respond to the IN token with a NAK */
+ ret = lan7x_read_reg(udev, HW_CFG, &val);
+ if (ret)
+ return ret;
+ val |= LAN75XX_HW_CFG_BIR;
+ return lan7x_write_reg(udev, HW_CFG, val);
+}
+
+int lan75xx_write_hwaddr(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ unsigned char *enetaddr = pdata->enetaddr;
+ u32 addr_lo = get_unaligned_le32(&enetaddr[0]);
+ u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]);
+ int ret;
+
+ /* set hardware address */
+ ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX + 4, addr_lo);
+ if (ret)
+ return ret;
+
+ addr_hi |= LAN75XX_ADDR_FILTX_FB_VALID;
+ ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX, addr_hi);
+ if (ret)
+ return ret;
+
+ debug("MAC addr %pM written\n", enetaddr);
+
+ return 0;
+}
+
+static int lan75xx_eth_start(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct lan7x_private *priv = dev_get_priv(dev);
+ struct ueth_data *ueth = &priv->ueth;
+ int ret;
+ u32 write_buf;
+
+ /* Reset and read Mac addr were done in probe() */
+ ret = lan75xx_write_hwaddr(dev);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN75XX_BURST_CAP, 0);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN75XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+ if (ret)
+ return ret;
+
+ /* set FIFO sizes */
+ write_buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+ ret = lan7x_write_reg(udev, LAN75XX_FCT_RX_FIFO_END, write_buf);
+ if (ret)
+ return ret;
+
+ write_buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+ ret = lan7x_write_reg(udev, LAN75XX_FCT_TX_FIFO_END, write_buf);
+ if (ret)
+ return ret;
+
+ /* Init Tx */
+ ret = lan7x_write_reg(udev, FLOW, 0);
+ if (ret)
+ return ret;
+
+ /* Init Rx. Set Vlan, keep defult for VLAN on 75xx */
+ ret = lan75xx_set_receive_filter(udev);
+ if (ret)
+ return ret;
+
+ /* phy workaround for gig link */
+ ret = lan75xx_phy_gig_workaround(udev, ueth);
+ if (ret)
+ return ret;
+
+ /* Init PHY, autonego, and link */
+ ret = lan7x_eth_phylib_connect(dev, &priv->ueth);
+ if (ret)
+ return ret;
+ ret = lan7x_eth_phylib_config_start(dev);
+ if (ret)
+ return ret;
+
+ /*
+ * MAC_CR has to be set after PHY init.
+ * MAC will auto detect the PHY speed.
+ */
+ ret = lan7x_read_reg(udev, MAC_CR, &write_buf);
+ if (ret)
+ return ret;
+ write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP;
+ ret = lan7x_write_reg(udev, MAC_CR, write_buf);
+ if (ret)
+ return ret;
+
+ lan75xx_start_tx_path(udev);
+ lan75xx_start_rx_path(udev);
+
+ return lan75xx_update_flowcontrol(udev, ueth);
+}
+
+int lan75xx_read_rom_hwaddr(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ int ret;
+
+ /*
+ * Refer to the doc/README.enetaddr and doc/README.usb for
+ * the U-Boot MAC address policy
+ */
+ ret = lan7x_read_eeprom_mac(pdata->enetaddr, udev);
+ if (ret)
+ memset(pdata->enetaddr, 0, 6);
+
+ return 0;
+}
+
+static int lan75xx_eth_probe(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct lan7x_private *priv = dev_get_priv(dev);
+ struct ueth_data *ueth = &priv->ueth;
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ int ret;
+
+ /* Do a reset in order to get the MAC address from HW */
+ if (lan75xx_basic_reset(udev, ueth, priv))
+ return 0;
+
+ /* Get the MAC address */
+ /*
+ * We must set the eth->enetaddr from HW because the upper layer
+ * will force to use the environmental var (usbethaddr) or random if
+ * there is no valid MAC address in eth->enetaddr.
+ *
+ * Refer to the doc/README.enetaddr and doc/README.usb for
+ * the U-Boot MAC address policy
+ */
+ lan7x_read_eeprom_mac(pdata->enetaddr, udev);
+ /* Do not return 0 for not finding MAC addr in HW */
+
+ ret = usb_ether_register(dev, ueth, RX_URB_SIZE);
+ if (ret)
+ return ret;
+
+ /* Register phylib */
+ return lan7x_phylib_register(dev);
+}
+
+static const struct eth_ops lan75xx_eth_ops = {
+ .start = lan75xx_eth_start,
+ .send = lan7x_eth_send,
+ .recv = lan7x_eth_recv,
+ .free_pkt = lan7x_free_pkt,
+ .stop = lan7x_eth_stop,
+ .write_hwaddr = lan75xx_write_hwaddr,
+ .read_rom_hwaddr = lan75xx_read_rom_hwaddr,
+};
+
+U_BOOT_DRIVER(lan75xx_eth) = {
+ .name = "lan75xx_eth",
+ .id = UCLASS_ETH,
+ .probe = lan75xx_eth_probe,
+ .remove = lan7x_eth_remove,
+ .ops = &lan75xx_eth_ops,
+ .priv_auto_alloc_size = sizeof(struct lan7x_private),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+
+static const struct usb_device_id lan75xx_eth_id_table[] = {
+ { USB_DEVICE(0x0424, 0x7500) }, /* LAN7500 USB Ethernet */
+ { } /* Terminating entry */
+};
+
+U_BOOT_USB_DEVICE(lan75xx_eth, lan75xx_eth_id_table);
diff --git a/drivers/usb/eth/lan78xx.c b/drivers/usb/eth/lan78xx.c
new file mode 100644
index 0000000..b998f4f
--- /dev/null
+++ b/drivers/usb/eth/lan78xx.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm.h>
+#include <usb.h>
+#include "usb_ether.h"
+#include "lan7x.h"
+
+/* LAN78xx specific register/bit defines */
+#define LAN78XX_HW_CFG_LED1_EN BIT(21) /* Muxed with EEDO */
+#define LAN78XX_HW_CFG_LED0_EN BIT(20) /* Muxed with EECLK */
+
+#define LAN78XX_USB_CFG0 0x080
+#define LAN78XX_USB_CFG0_BIR BIT(6)
+
+#define LAN78XX_BURST_CAP 0x090
+
+#define LAN78XX_BULK_IN_DLY 0x094
+
+#define LAN78XX_RFE_CTL 0x0B0
+
+#define LAN78XX_FCT_RX_CTL 0x0C0
+
+#define LAN78XX_FCT_TX_CTL 0x0C4
+
+#define LAN78XX_FCT_RX_FIFO_END 0x0C8
+
+#define LAN78XX_FCT_TX_FIFO_END 0x0CC
+
+#define LAN78XX_FCT_FLOW 0x0D0
+
+#define LAN78XX_MAF_BASE 0x400
+#define LAN78XX_MAF_HIX 0x00
+#define LAN78XX_MAF_LOX 0x04
+#define LAN78XX_MAF_HI_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_HIX)
+#define LAN78XX_MAF_LO_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_LOX)
+#define LAN78XX_MAF_HI(index) (LAN78XX_MAF_BASE + (8 * (index)) + \
+ LAN78XX_MAF_HIX)
+#define LAN78XX_MAF_LO(index) (LAN78XX_MAF_BASE + (8 * (index)) + \
+ LAN78XX_MAF_LOX)
+#define LAN78XX_MAF_HI_VALID BIT(31)
+
+/* OTP registers */
+#define LAN78XX_OTP_BASE_ADDR 0x00001000
+
+#define LAN78XX_OTP_PWR_DN (LAN78XX_OTP_BASE_ADDR + 4 * 0x00)
+#define LAN78XX_OTP_PWR_DN_PWRDN_N BIT(0)
+
+#define LAN78XX_OTP_ADDR1 (LAN78XX_OTP_BASE_ADDR + 4 * 0x01)
+#define LAN78XX_OTP_ADDR1_15_11 0x1F
+
+#define LAN78XX_OTP_ADDR2 (LAN78XX_OTP_BASE_ADDR + 4 * 0x02)
+#define LAN78XX_OTP_ADDR2_10_3 0xFF
+
+#define LAN78XX_OTP_RD_DATA (LAN78XX_OTP_BASE_ADDR + 4 * 0x06)
+
+#define LAN78XX_OTP_FUNC_CMD (LAN78XX_OTP_BASE_ADDR + 4 * 0x08)
+#define LAN78XX_OTP_FUNC_CMD_READ BIT(0)
+
+#define LAN78XX_OTP_CMD_GO (LAN78XX_OTP_BASE_ADDR + 4 * 0x0A)
+#define LAN78XX_OTP_CMD_GO_GO BIT(0)
+
+#define LAN78XX_OTP_STATUS (LAN78XX_OTP_BASE_ADDR + 4 * 0x0C)
+#define LAN78XX_OTP_STATUS_BUSY BIT(0)
+
+#define LAN78XX_OTP_INDICATOR_1 0xF3
+#define LAN78XX_OTP_INDICATOR_2 0xF7
+
+/*
+ * Lan78xx infrastructure commands
+ */
+static int lan78xx_read_raw_otp(struct usb_device *udev, u32 offset,
+ u32 length, u8 *data)
+{
+ int i;
+ int ret;
+ u32 buf;
+
+ ret = lan7x_read_reg(udev, LAN78XX_OTP_PWR_DN, &buf);
+ if (ret)
+ return ret;
+
+ if (buf & LAN78XX_OTP_PWR_DN_PWRDN_N) {
+ /* clear it and wait to be cleared */
+ ret = lan7x_write_reg(udev, LAN78XX_OTP_PWR_DN, 0);
+ if (ret)
+ return ret;
+
+ ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_PWR_DN_PWRDN_N",
+ LAN78XX_OTP_PWR_DN,
+ LAN78XX_OTP_PWR_DN_PWRDN_N,
+ false, 1000, 0);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < length; i++) {
+ ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR1,
+ ((offset + i) >> 8) &
+ LAN78XX_OTP_ADDR1_15_11);
+ if (ret)
+ return ret;
+ ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR2,
+ ((offset + i) & LAN78XX_OTP_ADDR2_10_3));
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_OTP_FUNC_CMD,
+ LAN78XX_OTP_FUNC_CMD_READ);
+ if (ret)
+ return ret;
+ ret = lan7x_write_reg(udev, LAN78XX_OTP_CMD_GO,
+ LAN78XX_OTP_CMD_GO_GO);
+
+ if (ret)
+ return ret;
+
+ ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_STATUS_BUSY",
+ LAN78XX_OTP_STATUS,
+ LAN78XX_OTP_STATUS_BUSY,
+ false, 1000, 0);
+ if (ret)
+ return ret;
+
+ ret = lan7x_read_reg(udev, LAN78XX_OTP_RD_DATA, &buf);
+ if (ret)
+ return ret;
+
+ data[i] = (u8)(buf & 0xFF);
+ }
+
+ return 0;
+}
+
+static int lan78xx_read_otp(struct usb_device *udev, u32 offset,
+ u32 length, u8 *data)
+{
+ u8 sig;
+ int ret;
+
+ ret = lan78xx_read_raw_otp(udev, 0, 1, &sig);
+
+ if (!ret) {
+ if (sig == LAN78XX_OTP_INDICATOR_1)
+ offset = offset;
+ else if (sig == LAN78XX_OTP_INDICATOR_2)
+ offset += 0x100;
+ else
+ return -EINVAL;
+ ret = lan78xx_read_raw_otp(udev, offset, length, data);
+ if (ret)
+ return ret;
+ }
+ debug("LAN78x: MAC address from OTP = %pM\n", data);
+
+ return ret;
+}
+
+static int lan78xx_read_otp_mac(unsigned char *enetaddr,
+ struct usb_device *udev)
+{
+ int ret;
+
+ memset(enetaddr, 0, 6);
+
+ ret = lan78xx_read_otp(udev,
+ EEPROM_MAC_OFFSET,
+ ETH_ALEN,
+ enetaddr);
+ if (!ret && is_valid_ethaddr(enetaddr)) {
+ /* eeprom values are valid so use them */
+ debug("MAC address read from OTP %pM\n", enetaddr);
+ return 0;
+ }
+ debug("MAC address read from OTP invalid %pM\n", enetaddr);
+
+ memset(enetaddr, 0, 6);
+ return -EINVAL;
+}
+
+static int lan78xx_update_flowcontrol(struct usb_device *udev,
+ struct ueth_data *dev)
+{
+ uint32_t flow = 0, fct_flow = 0;
+ int ret;
+
+ ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_FCT_FLOW, fct_flow);
+ if (ret)
+ return ret;
+ return lan7x_write_reg(udev, FLOW, flow);
+}
+
+static int lan78xx_read_mac(unsigned char *enetaddr,
+ struct usb_device *udev,
+ struct lan7x_private *priv)
+{
+ u32 val;
+ int ret;
+ int saved = 0, done = 0;
+
+ /*
+ * Depends on chip, some EEPROM pins are muxed with LED function.
+ * disable & restore LED function to access EEPROM.
+ */
+ if ((priv->chipid == ID_REV_CHIP_ID_7800) ||
+ (priv->chipid == ID_REV_CHIP_ID_7850)) {
+ ret = lan7x_read_reg(udev, HW_CFG, &val);
+ if (ret)
+ return ret;
+ saved = val;
+ val &= ~(LAN78XX_HW_CFG_LED1_EN | LAN78XX_HW_CFG_LED0_EN);
+ ret = lan7x_write_reg(udev, HW_CFG, val);
+ if (ret)
+ goto restore;
+ }
+
+ /*
+ * Refer to the doc/README.enetaddr and doc/README.usb for
+ * the U-Boot MAC address policy
+ */
+ /* try reading mac address from EEPROM, then from OTP */
+ ret = lan7x_read_eeprom_mac(enetaddr, udev);
+ if (!ret)
+ done = 1;
+
+restore:
+ if ((priv->chipid == ID_REV_CHIP_ID_7800) ||
+ (priv->chipid == ID_REV_CHIP_ID_7850)) {
+ ret = lan7x_write_reg(udev, HW_CFG, saved);
+ if (ret)
+ return ret;
+ }
+ /* if the EEPROM mac address is good, then exit */
+ if (done)
+ return 0;
+
+ /* try reading mac address from OTP if the device is LAN78xx */
+ return lan78xx_read_otp_mac(enetaddr, udev);
+}
+
+static int lan78xx_set_receive_filter(struct usb_device *udev)
+{
+ /* No multicast in u-boot for now */
+ return lan7x_write_reg(udev, LAN78XX_RFE_CTL,
+ RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT);
+}
+
+/* starts the TX path */
+static void lan78xx_start_tx_path(struct usb_device *udev)
+{
+ /* Enable Tx at MAC */
+ lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN);
+
+ /* Enable Tx at SCSRs */
+ lan7x_write_reg(udev, LAN78XX_FCT_TX_CTL, FCT_TX_CTL_EN);
+}
+
+/* Starts the Receive path */
+static void lan78xx_start_rx_path(struct usb_device *udev)
+{
+ /* Enable Rx at MAC */
+ lan7x_write_reg(udev, MAC_RX,
+ LAN7X_MAC_RX_MAX_SIZE_DEFAULT |
+ MAC_RX_FCS_STRIP | MAC_RX_RXEN);
+
+ /* Enable Rx at SCSRs */
+ lan7x_write_reg(udev, LAN78XX_FCT_RX_CTL, FCT_RX_CTL_EN);
+}
+
+static int lan78xx_basic_reset(struct usb_device *udev,
+ struct ueth_data *dev,
+ struct lan7x_private *priv)
+{
+ int ret;
+ u32 val;
+
+ ret = lan7x_basic_reset(udev, dev);
+ if (ret)
+ return ret;
+
+ /* Keep the chip ID */
+ ret = lan7x_read_reg(udev, ID_REV, &val);
+ if (ret)
+ return ret;
+ debug("LAN78xx ID_REV = 0x%08x\n", val);
+
+ priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16;
+
+ /* Respond to the IN token with a NAK */
+ ret = lan7x_read_reg(udev, LAN78XX_USB_CFG0, &val);
+ if (ret)
+ return ret;
+ val |= LAN78XX_USB_CFG0_BIR;
+ return lan7x_write_reg(udev, LAN78XX_USB_CFG0, val);
+}
+
+int lan78xx_write_hwaddr(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ unsigned char *enetaddr = pdata->enetaddr;
+ u32 addr_lo = get_unaligned_le32(&enetaddr[0]);
+ u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]);
+ int ret;
+
+ /* set hardware address */
+ ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_MAF_LO(0), addr_lo);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_MAF_HI(0),
+ addr_hi | LAN78XX_MAF_HI_VALID);
+ if (ret)
+ return ret;
+
+ debug("MAC addr %pM written\n", enetaddr);
+
+ return 0;
+}
+
+static int lan78xx_eth_start(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct lan7x_private *priv = dev_get_priv(dev);
+
+ int ret;
+ u32 write_buf;
+
+ /* Reset and read Mac addr were done in probe() */
+ ret = lan78xx_write_hwaddr(dev);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_BURST_CAP, 0);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF);
+ if (ret)
+ return ret;
+
+ /* set FIFO sizes */
+ ret = lan7x_write_reg(udev, LAN78XX_FCT_RX_FIFO_END,
+ (MAX_RX_FIFO_SIZE - 512) / 512);
+ if (ret)
+ return ret;
+
+ ret = lan7x_write_reg(udev, LAN78XX_FCT_TX_FIFO_END,
+ (MAX_TX_FIFO_SIZE - 512) / 512);
+ if (ret)
+ return ret;
+
+ /* Init Tx */
+ ret = lan7x_write_reg(udev, FLOW, 0);
+ if (ret)
+ return ret;
+
+ /* Init Rx. Set Vlan, keep defult for VLAN on 78xx */
+ ret = lan78xx_set_receive_filter(udev);
+ if (ret)
+ return ret;
+
+ /* Init PHY, autonego, and link */
+ ret = lan7x_eth_phylib_connect(dev, &priv->ueth);
+ if (ret)
+ return ret;
+ ret = lan7x_eth_phylib_config_start(dev);
+ if (ret)
+ return ret;
+
+ /*
+ * MAC_CR has to be set after PHY init.
+ * MAC will auto detect the PHY speed.
+ */
+ ret = lan7x_read_reg(udev, MAC_CR, &write_buf);
+ if (ret)
+ return ret;
+ write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP;
+ ret = lan7x_write_reg(udev, MAC_CR, write_buf);
+ if (ret)
+ return ret;
+
+ lan78xx_start_tx_path(udev);
+ lan78xx_start_rx_path(udev);
+
+ return lan78xx_update_flowcontrol(udev, &priv->ueth);
+}
+
+int lan78xx_read_rom_hwaddr(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct lan7x_private *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = lan78xx_read_mac(pdata->enetaddr, udev, priv);
+ if (ret)
+ memset(pdata->enetaddr, 0, 6);
+
+ return 0;
+}
+
+static int lan78xx_eth_probe(struct udevice *dev)
+{
+ struct usb_device *udev = dev_get_parent_priv(dev);
+ struct lan7x_private *priv = dev_get_priv(dev);
+ struct ueth_data *ueth = &priv->ueth;
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ int ret;
+
+ /* Do a reset in order to get the MAC address from HW */
+ if (lan78xx_basic_reset(udev, ueth, priv))
+ return 0;
+
+ /* Get the MAC address */
+ /*
+ * We must set the eth->enetaddr from HW because the upper layer
+ * will force to use the environmental var (usbethaddr) or random if
+ * there is no valid MAC address in eth->enetaddr.
+ */
+ lan78xx_read_mac(pdata->enetaddr, udev, priv);
+ /* Do not return 0 for not finding MAC addr in HW */
+
+ ret = usb_ether_register(dev, ueth, RX_URB_SIZE);
+ if (ret)
+ return ret;
+
+ /* Register phylib */
+ return lan7x_phylib_register(dev);
+}
+
+static const struct eth_ops lan78xx_eth_ops = {
+ .start = lan78xx_eth_start,
+ .send = lan7x_eth_send,
+ .recv = lan7x_eth_recv,
+ .free_pkt = lan7x_free_pkt,
+ .stop = lan7x_eth_stop,
+ .write_hwaddr = lan78xx_write_hwaddr,
+ .read_rom_hwaddr = lan78xx_read_rom_hwaddr,
+};
+
+U_BOOT_DRIVER(lan78xx_eth) = {
+ .name = "lan78xx_eth",
+ .id = UCLASS_ETH,
+ .probe = lan78xx_eth_probe,
+ .remove = lan7x_eth_remove,
+ .ops = &lan78xx_eth_ops,
+ .priv_auto_alloc_size = sizeof(struct lan7x_private),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+
+static const struct usb_device_id lan78xx_eth_id_table[] = {
+ { USB_DEVICE(0x0424, 0x7800) }, /* LAN7800 USB Ethernet */
+ { USB_DEVICE(0x0424, 0x7850) }, /* LAN7850 USB Ethernet */
+ { } /* Terminating entry */
+};
+
+U_BOOT_USB_DEVICE(lan78xx_eth, lan78xx_eth_id_table);
diff --git a/drivers/usb/eth/lan7x.c b/drivers/usb/eth/lan7x.c
new file mode 100644
index 0000000..222d327
--- /dev/null
+++ b/drivers/usb/eth/lan7x.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <memalign.h>
+#include <usb.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include "usb_ether.h"
+#include "lan7x.h"
+
+/*
+ * Lan7x infrastructure commands
+ */
+int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data)
+{
+ int len;
+ ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
+
+ cpu_to_le32s(&data);
+ tmpbuf[0] = data;
+
+ len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, tmpbuf, sizeof(data),
+ USB_CTRL_SET_TIMEOUT_MS);
+ if (len != sizeof(data)) {
+ debug("%s failed: index=%d, data=%d, len=%d",
+ __func__, index, data, len);
+ return -EIO;
+ }
+ return 0;
+}
+
+int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data)
+{
+ int len;
+ ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
+
+ len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ USB_VENDOR_REQUEST_READ_REGISTER,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, tmpbuf, sizeof(*data),
+ USB_CTRL_GET_TIMEOUT_MS);
+ *data = tmpbuf[0];
+ if (len != sizeof(*data)) {
+ debug("%s failed: index=%d, len=%d", __func__, index, len);
+ return -EIO;
+ }
+
+ le32_to_cpus(data);
+ return 0;
+}
+
+static int lan7x_phy_wait_not_busy(struct usb_device *udev)
+{
+ return lan7x_wait_for_bit(udev, __func__,
+ MII_ACC, MII_ACC_MII_BUSY,
+ false, 100, 0);
+}
+
+int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx)
+{
+ u32 val, addr;
+
+ /* confirm MII not busy */
+ if (lan7x_phy_wait_not_busy(udev)) {
+ debug("MII is busy in %s\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ /* set the address, index & direction (read from PHY) */
+ addr = (phy_id << 11) | (idx << 6) |
+ MII_ACC_MII_READ | MII_ACC_MII_BUSY;
+ lan7x_write_reg(udev, MII_ACC, addr);
+
+ if (lan7x_phy_wait_not_busy(udev)) {
+ debug("Timed out reading MII reg %02X\n", idx);
+ return -ETIMEDOUT;
+ }
+
+ lan7x_read_reg(udev, MII_DATA, &val);
+
+ return val & 0xFFFF;
+}
+
+void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval)
+{
+ u32 addr;
+
+ /* confirm MII not busy */
+ if (lan7x_phy_wait_not_busy(udev)) {
+ debug("MII is busy in %s\n", __func__);
+ return;
+ }
+
+ lan7x_write_reg(udev, MII_DATA, regval);
+
+ /* set the address, index & direction (write to PHY) */
+ addr = (phy_id << 11) | (idx << 6) |
+ MII_ACC_MII_WRITE | MII_ACC_MII_BUSY;
+ lan7x_write_reg(udev, MII_ACC, addr);
+
+ if (lan7x_phy_wait_not_busy(udev))
+ debug("Timed out writing MII reg %02X\n", idx);
+}
+
+/*
+ * Lan7x phylib wrappers
+ */
+static int lan7x_phylib_mdio_read(struct mii_dev *bus,
+ int addr, int devad, int reg)
+{
+ struct usb_device *udev = dev_get_parent_priv(bus->priv);
+
+ return lan7x_mdio_read(udev, addr, reg);
+}
+
+static int lan7x_phylib_mdio_write(struct mii_dev *bus,
+ int addr, int devad, int reg, u16 val)
+{
+ struct usb_device *udev = dev_get_parent_priv(bus->priv);
+
+ lan7x_mdio_write(udev, addr, reg, (int)val);
+
+ return 0;
+}
+
+/*
+ * Lan7x eeprom functions
+ */
+static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev)
+{
+ return lan7x_wait_for_bit(udev, __func__,
+ E2P_CMD, E2P_CMD_EPC_BUSY,
+ false, 100, 0);
+}
+
+static int lan7x_wait_eeprom(struct usb_device *udev)
+{
+ return lan7x_wait_for_bit(udev, __func__,
+ E2P_CMD,
+ (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT),
+ false, 100, 0);
+}
+
+static int lan7x_read_eeprom(struct usb_device *udev,
+ u32 offset, u32 length, u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ ret = lan7x_eeprom_confirm_not_busy(udev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ |
+ (offset & E2P_CMD_EPC_ADDR_MASK);
+ lan7x_write_reg(udev, E2P_CMD, val);
+
+ ret = lan7x_wait_eeprom(udev);
+ if (ret)
+ return ret;
+
+ lan7x_read_reg(udev, E2P_DATA, &val);
+ data[i] = val & 0xFF;
+ offset++;
+ }
+ return ret;
+}
+
+/*
+ * Lan7x phylib functions
+ */
+int lan7x_phylib_register(struct udevice *udev)
+{
+ struct usb_device *usbdev = dev_get_parent_priv(udev);
+ struct lan7x_private *priv = dev_get_priv(udev);
+ int ret;
+
+ priv->mdiobus = mdio_alloc();
+ if (!priv->mdiobus) {
+ printf("mdio_alloc failed\n");
+ return -ENOMEM;
+ }
+ priv->mdiobus->read = lan7x_phylib_mdio_read;
+ priv->mdiobus->write = lan7x_phylib_mdio_write;
+ sprintf(priv->mdiobus->name,
+ "lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr);
+ priv->mdiobus->priv = (void *)udev;
+
+ ret = mdio_register(priv->mdiobus);
+ if (ret) {
+ printf("mdio_register failed\n");
+ free(priv->mdiobus);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev)
+{
+ struct lan7x_private *priv = dev_get_priv(udev);
+
+ priv->phydev = phy_connect(priv->mdiobus, dev->phy_id,
+ udev, PHY_INTERFACE_MODE_MII);
+
+ if (!priv->phydev) {
+ printf("phy_connect failed\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+int lan7x_eth_phylib_config_start(struct udevice *udev)
+{
+ struct lan7x_private *priv = dev_get_priv(udev);
+ int ret;
+
+ /* configure supported modes */
+ priv->phydev->supported = PHY_BASIC_FEATURES |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
+
+ priv->phydev->advertising = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause |
+ ADVERTISED_Autoneg;
+
+ priv->phydev->autoneg = AUTONEG_ENABLE;
+
+ ret = genphy_config_aneg(priv->phydev);
+ if (ret) {
+ printf("genphy_config_aneg failed\n");
+ return ret;
+ }
+ ret = phy_startup(priv->phydev);
+ if (ret) {
+ printf("phy_startup failed\n");
+ return ret;
+ }
+
+ debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__,
+ priv->phydev->speed, priv->phydev->duplex,
+ priv->phydev->advertising, priv->phydev->supported);
+
+ return 0;
+}
+
+int lan7x_update_flowcontrol(struct usb_device *udev,
+ struct ueth_data *dev,
+ uint32_t *flow, uint32_t *fct_flow)
+{
+ uint32_t lcladv, rmtadv;
+ u8 cap = 0;
+ struct lan7x_private *priv = dev_get_priv(udev->dev);
+
+ debug("** %s()\n", __func__);
+ debug("** %s() priv->phydev->speed %i duplex %i\n", __func__,
+ priv->phydev->speed, priv->phydev->duplex);
+
+ if (priv->phydev->duplex == DUPLEX_FULL) {
+ lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE);
+ rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA);
+ cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+ debug("TX Flow ");
+ if (cap & FLOW_CTRL_TX) {
+ *flow = (FLOW_CR_TX_FCEN | 0xFFFF);
+ /* set fct_flow thresholds to 20% and 80% */
+ *fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512))
+ & 0x7FUL;
+ *fct_flow <<= 8UL;
+ *fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512))
+ & 0x7FUL;
+ debug("EN ");
+ } else {
+ debug("DIS ");
+ }
+ debug("RX Flow ");
+ if (cap & FLOW_CTRL_RX) {
+ *flow |= FLOW_CR_RX_FCEN;
+ debug("EN");
+ } else {
+ debug("DIS");
+ }
+ }
+ debug("\n");
+ return 0;
+}
+
+int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev)
+{
+ int ret;
+
+ memset(enetaddr, 0, 6);
+
+ ret = lan7x_read_eeprom(udev, 0, 1, enetaddr);
+
+ if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) {
+ ret = lan7x_read_eeprom(udev,
+ EEPROM_MAC_OFFSET, ETH_ALEN,
+ enetaddr);
+ if ((ret == 0) && is_valid_ethaddr(enetaddr)) {
+ /* eeprom values are valid so use them */
+ debug("MAC address read from EEPROM %pM\n",
+ enetaddr);
+ return 0;
+ }
+ }
+ debug("MAC address read from EEPROM invalid %pM\n", enetaddr);
+
+ memset(enetaddr, 0, 6);
+ return -EINVAL;
+}
+
+int lan7x_pmt_phy_reset(struct usb_device *udev,
+ struct ueth_data *dev)
+{
+ int ret;
+ u32 data;
+
+ ret = lan7x_read_reg(udev, PMT_CTL, &data);
+ if (ret)
+ return ret;
+ ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST);
+ if (ret)
+ return ret;
+
+ /* for LAN7x, we need to check PMT_CTL_READY asserted */
+ ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST",
+ PMT_CTL, PMT_CTL_PHY_RST,
+ false, 1000, 0); /* could take over 125mS */
+ if (ret)
+ return ret;
+
+ return lan7x_wait_for_bit(udev, "PMT_CTL_READY",
+ PMT_CTL, PMT_CTL_READY,
+ true, 1000, 0);
+}
+
+int lan7x_basic_reset(struct usb_device *udev,
+ struct ueth_data *dev)
+{
+ int ret;
+
+ dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */
+
+ ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST);
+ if (ret)
+ return ret;
+
+ ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST",
+ HW_CFG, HW_CFG_LRST,
+ false, 1000, 0);
+ if (ret)
+ return ret;
+
+ debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr);
+
+ return lan7x_pmt_phy_reset(udev, dev);
+}
+
+void lan7x_eth_stop(struct udevice *dev)
+{
+ debug("** %s()\n", __func__);
+}
+
+int lan7x_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct lan7x_private *priv = dev_get_priv(dev);
+ struct ueth_data *ueth = &priv->ueth;
+ int err;
+ int actual_len;
+ u32 tx_cmd_a;
+ u32 tx_cmd_b;
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
+ PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b));
+
+ debug("** %s(), len %d, buf %#x\n", __func__, length,
+ (unsigned int)(ulong) msg);
+ if (length > PKTSIZE)
+ return -ENOSPC;
+
+ /* LAN7x disable all TX offload features for u-boot */
+ tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS;
+ tx_cmd_b = 0;
+ cpu_to_le32s(&tx_cmd_a);
+ cpu_to_le32s(&tx_cmd_b);
+
+ /* prepend cmd_a and cmd_b */
+ memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
+ memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
+ memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
+ length);
+ err = usb_bulk_msg(ueth->pusb_dev,
+ usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out),
+ (void *)msg,
+ length + sizeof(tx_cmd_a) +
+ sizeof(tx_cmd_b),
+ &actual_len, USB_BULK_SEND_TIMEOUT_MS);
+ debug("Tx: len = %u, actual = %u, err = %d\n",
+ (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)),
+ (unsigned int)actual_len, err);
+
+ return err;
+}
+
+int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct lan7x_private *priv = dev_get_priv(dev);
+ struct ueth_data *ueth = &priv->ueth;
+ uint8_t *ptr;
+ int ret, len;
+ u32 packet_len = 0;
+ u32 rx_cmd_a = 0;
+
+ len = usb_ether_get_rx_bytes(ueth, &ptr);
+ debug("%s: first try, len=%d\n", __func__, len);
+ if (!len) {
+ if (!(flags & ETH_RECV_CHECK_DEVICE))
+ return -EAGAIN;
+ ret = usb_ether_receive(ueth, RX_URB_SIZE);
+ if (ret == -EAGAIN)
+ return ret;
+
+ len = usb_ether_get_rx_bytes(ueth, &ptr);
+ debug("%s: second try, len=%d\n", __func__, len);
+ }
+
+ /*
+ * 1st 4 bytes contain the length of the actual data plus error info.
+ * Extract data length.
+ */
+ if (len < sizeof(packet_len)) {
+ debug("Rx: incomplete packet length\n");
+ goto err;
+ }
+ memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a));
+ le32_to_cpus(&rx_cmd_a);
+ if (rx_cmd_a & RX_CMD_A_RXE) {
+ debug("Rx: Error header=%#x", rx_cmd_a);
+ goto err;
+ }
+ packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK);
+
+ if (packet_len > len - sizeof(packet_len)) {
+ debug("Rx: too large packet: %d\n", packet_len);
+ goto err;
+ }
+
+ /*
+ * For LAN7x, the length in command A does not
+ * include command A, B, and C length.
+ * So use it as is.
+ */
+
+ *packetp = ptr + 10;
+ return packet_len;
+
+err:
+ usb_ether_advance_rxbuf(ueth, -1);
+ return -EINVAL;
+}
+
+int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
+{
+ struct lan7x_private *priv = dev_get_priv(dev);
+
+ packet_len = ALIGN(packet_len, 4);
+ usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
+
+ return 0;
+}
+
+int lan7x_eth_remove(struct udevice *dev)
+{
+ struct lan7x_private *priv = dev_get_priv(dev);
+
+ debug("** %s()\n", __func__);
+ free(priv->phydev);
+ mdio_unregister(priv->mdiobus);
+ mdio_free(priv->mdiobus);
+
+ return 0;
+}
diff --git a/drivers/usb/eth/lan7x.h b/drivers/usb/eth/lan7x.h
new file mode 100644
index 0000000..4f4b3f8
--- /dev/null
+++ b/drivers/usb/eth/lan7x.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <console.h>
+#include <watchdog.h>
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
+#define USB_VENDOR_REQUEST_GET_STATS 0xA2
+
+/* Tx Command A */
+#define TX_CMD_A_FCS BIT(22)
+#define TX_CMD_A_LEN_MASK 0x000FFFFF
+
+/* Rx Command A */
+#define RX_CMD_A_RXE BIT(18)
+#define RX_CMD_A_LEN_MASK 0x00003FFF
+
+/* SCSRs */
+#define ID_REV 0x00
+#define ID_REV_CHIP_ID_MASK 0xFFFF0000
+#define ID_REV_CHIP_ID_7500 0x7500
+#define ID_REV_CHIP_ID_7800 0x7800
+#define ID_REV_CHIP_ID_7850 0x7850
+
+#define INT_STS 0x0C
+
+#define HW_CFG 0x010
+#define HW_CFG_LRST BIT(1)
+
+#define PMT_CTL 0x014
+#define PMT_CTL_PHY_PWRUP BIT(10)
+#define PMT_CTL_READY BIT(7)
+#define PMT_CTL_PHY_RST BIT(4)
+
+#define E2P_CMD 0x040
+#define E2P_CMD_EPC_BUSY BIT(31)
+#define E2P_CMD_EPC_CMD_READ 0x00000000
+#define E2P_CMD_EPC_TIMEOUT BIT(10)
+#define E2P_CMD_EPC_ADDR_MASK 0x000001FF
+
+#define E2P_DATA 0x044
+
+#define RFE_CTL_BCAST_EN BIT(10)
+#define RFE_CTL_DA_PERFECT BIT(1)
+
+#define FCT_RX_CTL_EN BIT(31)
+
+#define FCT_TX_CTL_EN BIT(31)
+
+#define MAC_CR 0x100
+#define MAC_CR_ADP BIT(13)
+#define MAC_CR_AUTO_DUPLEX BIT(12)
+#define MAC_CR_AUTO_SPEED BIT(11)
+
+#define MAC_RX 0x104
+#define MAC_RX_FCS_STRIP BIT(4)
+#define MAC_RX_RXEN BIT(0)
+
+#define MAC_TX 0x108
+#define MAC_TX_TXEN BIT(0)
+
+#define FLOW 0x10C
+#define FLOW_CR_TX_FCEN BIT(30)
+#define FLOW_CR_RX_FCEN BIT(29)
+
+#define RX_ADDRH 0x118
+#define RX_ADDRL 0x11C
+
+#define MII_ACC 0x120
+#define MII_ACC_MII_READ 0x00000000
+#define MII_ACC_MII_WRITE 0x00000002
+#define MII_ACC_MII_BUSY BIT(0)
+
+#define MII_DATA 0x124
+
+#define SS_USB_PKT_SIZE 1024
+#define HS_USB_PKT_SIZE 512
+#define FS_USB_PKT_SIZE 64
+
+#define MAX_RX_FIFO_SIZE (12 * 1024)
+#define MAX_TX_FIFO_SIZE (12 * 1024)
+#define DEFAULT_BULK_IN_DELAY 0x0800
+
+#define EEPROM_INDICATOR 0xA5
+#define EEPROM_MAC_OFFSET 0x01
+
+/* Some extra defines */
+#define LAN7X_INTERNAL_PHY_ID 1
+
+#define LAN7X_MAC_RX_MAX_SIZE(mtu) \
+ ((mtu) << 16) /* Max frame size */
+#define LAN7X_MAC_RX_MAX_SIZE_DEFAULT \
+ LAN7X_MAC_RX_MAX_SIZE(ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */)
+
+/* Timeouts */
+#define USB_CTRL_SET_TIMEOUT_MS 5000
+#define USB_CTRL_GET_TIMEOUT_MS 5000
+#define USB_BULK_SEND_TIMEOUT_MS 5000
+#define USB_BULK_RECV_TIMEOUT_MS 5000
+#define TIMEOUT_RESOLUTION_MS 50
+#define PHY_CONNECT_TIMEOUT_MS 5000
+
+#define RX_URB_SIZE 2048
+
+/* driver private */
+struct lan7x_private {
+ struct ueth_data ueth;
+ u32 chipid; /* Chip or device ID */
+ struct mii_dev *mdiobus;
+ struct phy_device *phydev;
+};
+
+/*
+ * Lan7x infrastructure commands
+ */
+
+int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data);
+
+int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data);
+
+static inline int lan7x_wait_for_bit(struct usb_device *udev,
+ const char *prefix, const u32 reg,
+ const u32 mask, const bool set,
+ const unsigned int timeout_ms,
+ const bool breakable)
+{
+ u32 val;
+ unsigned long start = get_timer(0);
+
+ while (1) {
+ lan7x_read_reg(udev, reg, &val);
+
+ if (!set)
+ val = ~val;
+
+ if ((val & mask) == mask)
+ return 0;
+
+ if (get_timer(start) > timeout_ms)
+ break;
+
+ if (breakable && ctrlc()) {
+ puts("Abort\n");
+ return -EINTR;
+ }
+
+ udelay(1);
+ WATCHDOG_RESET();
+ }
+
+ debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
+ mask, set);
+
+ return -ETIMEDOUT;
+}
+
+int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx);
+
+void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx,
+ int regval);
+
+static inline int lan7x_mdio_wait_for_bit(struct usb_device *udev,
+ const char *prefix,
+ int phy_id, const u32 reg,
+ const u32 mask, const bool set,
+ const unsigned int timeout_ms,
+ const bool breakable)
+{
+ u32 val;
+ unsigned long start = get_timer(0);
+
+ while (1) {
+ val = lan7x_mdio_read(udev, phy_id, reg);
+
+ if (!set)
+ val = ~val;
+
+ if ((val & mask) == mask)
+ return 0;
+
+ if (get_timer(start) > timeout_ms)
+ break;
+
+ if (breakable && ctrlc()) {
+ puts("Abort\n");
+ return -EINTR;
+ }
+
+ udelay(1);
+ WATCHDOG_RESET();
+ }
+
+ debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
+ mask, set);
+
+ return -ETIMEDOUT;
+}
+
+int lan7x_phylib_register(struct udevice *udev);
+
+int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev);
+
+int lan7x_eth_phylib_config_start(struct udevice *udev);
+
+int lan7x_pmt_phy_reset(struct usb_device *udev,
+ struct ueth_data *dev);
+
+int lan7x_update_flowcontrol(struct usb_device *udev,
+ struct ueth_data *dev,
+ uint32_t *flow, uint32_t *fct_flow);
+
+int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev);
+
+int lan7x_basic_reset(struct usb_device *udev,
+ struct ueth_data *dev);
+
+void lan7x_eth_stop(struct udevice *dev);
+
+int lan7x_eth_send(struct udevice *dev, void *packet, int length);
+
+int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp);
+
+int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len);
+
+int lan7x_eth_remove(struct udevice *dev);
--
2.7.4
More information about the U-Boot
mailing list