[U-Boot] [PATCH] armv8: fsl-lsch3: Make CCN-504 related code conditional

[Ashish Kumar]

LS2080 family has CCN-504 cache coherent interconnet.
Other SoCs from LSCH3 may have differnt interconnect like
LS1088.

Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
For clean git am this "http://patchwork.ozlabs.org/patch/800408/"
should be applied first

 README                                       | 4 ++++
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig    | 4 ++++
 arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 8 +++++---
 3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/README b/README
index a66a7ae..585e285 100644
--- a/README
+++ b/README
@@ -322,6 +322,10 @@ build a config tool - later.
 		Defined For SoC that has cache coherent interconnect
 		CCN-400
 
+		CONFIG_SYS_FSL_HAS_CCN504
+
+		Defined for SoC that has cache coherent interconnect CCN-504
+
 The following options need to be configured:
 
 - CPU Type:	Define exactly one, e.g. CONFIG_MPC85XX.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 1132969..bb69ca6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -60,6 +60,7 @@ config ARCH_LS2080A
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_LE
 	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_HAS_CCN504
 	select SYS_FSL_HAS_DP_DDR
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_HAS_DDR4
@@ -267,6 +268,9 @@ config SYS_FSL_IFC_BANK_COUNT
 config SYS_FSL_HAS_CCI400
 	bool
 
+config SYS_FSL_HAS_CCN504
+	bool
+
 config SYS_FSL_HAS_DP_DDR
 	bool
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 3136e3f..5ff01a0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -76,7 +76,7 @@ ENTRY(lowlevel_init)
 	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
 1:
 
-#ifdef CONFIG_FSL_LSCH3
+#if defined (CONFIG_SYS_FSL_HAS_CCN504)
 
 	/* Set Wuo bit for RN-I 20 */
 #ifdef CONFIG_ARCH_LS2080A
@@ -171,7 +171,7 @@ ENTRY(lowlevel_init)
 	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(20)
 	ldr	x1, =0x00FF000C
 	bl	ccn504_set_qos
-#endif
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
 
 #ifdef SMMU_BASE
 	/* Set the SMMU page size in the sACR register */
@@ -338,7 +338,9 @@ get_svr:
 	ldr	x1, =FSL_LSCH3_SVR
 	ldr	w0, [x1]
 	ret
+#endif
 
+#ifdef CONFIG_SYS_FSL_HAS_CCN504
 hnf_pstate_poll:
 	/* x0 has the desired status, return 0 for success, 1 for timeout
 	 * clobber x1, x2, x3, x4, x6, x7
@@ -420,7 +422,7 @@ ENTRY(__asm_flush_l3_dcache)
 	mov	lr, x29
 	ret
 ENDPROC(__asm_flush_l3_dcache)
-#endif
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
 
 #ifdef CONFIG_MP
 	/* Keep literals not used by the secondary boot code outside it */
-- 
2.7.4