[U-Boot] [PATCH v4 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform
Ashish Kumar
Ashish.Kumar at nxp.com
Fri Aug 18 05:44:50 UTC 2017
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin
platform that supports the LS1088A family SoCs. This patch add basic
support of the platform.
Signed-off-by: Alison Wang <alison.wang at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra at nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie at nxp.com>
---
v2:
Fix indentaion in commit msg
Separate RDB and Si specific file
v3:
1.Re-based on top of
commit d529124fdcf941c34074fd1ce600f4b1b4a7dd07
Merge: f0ca30f 6a5691e
Author: Tom Rini <trini at konsulko.com>
Date: Tue Aug 8 17:06:19 2017 -0400
Merge git://git.denx.de/u-boot-x86
2.Incorporate review comments on v2
Remove EMU support
Remove RAW timings
Disable default enabled CONFIG_DISPLAY_BOARDINFO and enable LATE_CONFIG_DISPLAY_BOARDINFO
3.Include PPA support
v4:
some configs moved to arch/arm/Kconfig
retimer code corrected
README added
arch/arm/Kconfig | 14 ++
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/fsl-ls1088a-rdb.dts | 40 ++++
board/freescale/ls1088a/Kconfig | 15 ++
board/freescale/ls1088a/MAINTAINERS | 7 +
board/freescale/ls1088a/Makefile | 9 +
board/freescale/ls1088a/README | 66 ++++++
board/freescale/ls1088a/ddr.c | 106 ++++++++++
board/freescale/ls1088a/ddr.h | 44 ++++
board/freescale/ls1088a/eth_ls1088ardb.c | 102 +++++++++
board/freescale/ls1088a/ls1088a.c | 335 ++++++++++++++++++++++++++++++
board/freescale/ls1088a/ls1088a_qixis.h | 34 +++
configs/ls1088ardb_qspi_defconfig | 29 +++
include/configs/ls1088a_common.h | 200 ++++++++++++++++++
include/configs/ls1088ardb.h | 316 ++++++++++++++++++++++++++++
17 files changed, 1321 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/fsl-ls1088a-rdb.dts
create mode 100644 board/freescale/ls1088a/Kconfig
create mode 100644 board/freescale/ls1088a/MAINTAINERS
create mode 100644 board/freescale/ls1088a/Makefile
create mode 100644 board/freescale/ls1088a/README
create mode 100644 board/freescale/ls1088a/ddr.c
create mode 100644 board/freescale/ls1088a/ddr.h
create mode 100644 board/freescale/ls1088a/eth_ls1088ardb.c
create mode 100644 board/freescale/ls1088a/ls1088a.c
create mode 100644 board/freescale/ls1088a/ls1088a_qixis.h
create mode 100644 configs/ls1088ardb_qspi_defconfig
create mode 100644 include/configs/ls1088a_common.h
create mode 100644 include/configs/ls1088ardb.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9cfeede..eaeab27 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -892,6 +892,19 @@ config TARGET_LS1012AFRDM
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1088ARDB
+ bool "Support ls1088ardb"
+ select ARCH_LS1088A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select ARCH_MISC_INIT
+ select BOARD_LATE_INIT
+ help
+ Support for NXP LS1088ARDB platform.
+ The LS1088A Reference design board (RDB) is a high-performance
+ development platform that supports the QorIQ LS1088A
+ Layerscape Architecture processor.
+
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select BOARD_LATE_INIT
@@ -1174,6 +1187,7 @@ source "board/creative/xfi3/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
+source "board/freescale/ls1088a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 8e4c3dd..aecdf81 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -88,6 +88,7 @@ config PSCI_RESET
depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \
!TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
!TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \
+ !TARGET_LS1088ARDB && \
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index dfcc081..be9e401 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -207,6 +207,7 @@ config SYS_LS_PPA_FW_ADDR
default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+ default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
default 0x400000 if SYS_LS_PPA_FW_IN_MMC
default 0x400000 if SYS_LS_PPA_FW_IN_NAND
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c2dc240..6f03a3f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -188,7 +188,8 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb \
fsl-ls2081a-rdb.dtb \
- fsl-ls2088a-rdb-qspi.dtb
+ fsl-ls2088a-rdb-qspi.dtb \
+ fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
new file mode 100644
index 0000000..30ceed8
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -0,0 +1,40 @@
+/*
+ * NXP ls1088a RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+ model = "NXP Layerscape 1088a RDB Board";
+ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+ aliases {
+ spi0 = &qspi;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+};
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
new file mode 100644
index 0000000..a4d8223
--- /dev/null
+++ b/board/freescale/ls1088a/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1088ARDB
+
+config SYS_BOARD
+ default "ls1088a"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1088ardb"
+
+endif
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
new file mode 100644
index 0000000..12834f6
--- /dev/null
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -0,0 +1,7 @@
+LS1088ARDB BOARD
+M: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
+M: Ashish Kumar <Ashish.Kumar at nxp.com>
+S: Maintained
+F: board/freescale/ls1088a/
+F: include/configs/ls1088ardb.h
+F: configs/ls1088ardb_qspi_defconfig
diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile
new file mode 100644
index 0000000..e997cf1
--- /dev/null
+++ b/board/freescale/ls1088a/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1088a.o
+obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
+obj-y += ddr.o
diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README
new file mode 100644
index 0000000..3f4d987
--- /dev/null
+++ b/board/freescale/ls1088a/README
@@ -0,0 +1,66 @@
+Overview
+--------
+The LS1088A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports ARM SoC LS1088A and its
+derivatives.
+
+
+LS1088A SoC Overview
+--------------------------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+RDB Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+
+For QSPI Boot
+SW1 0011 0001
+SW2 x100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+For SD Boot
+SW1 0010 0000
+SW2 0100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+For eMMC Boot
+SW1 0010 0000
+SW2 1100 0000
+SW3 1111 0010
+SW4 1001 0011
+SW5 1111 0000
+
+Alternately you can use this command to switch from QSPI to SD
+
+=> i2c mw 66 0x60 0x20; i2c mw 66 10 10;i2c mw 66 10 21
+
+ LS1088ARDB board Overview
+ -------------------------
+ - SERDES Connections, 16 lanes supporting:
+ - PCI Express - 3.0
+ - SATA 3.0
+ - XFI
+ - QSGMII
+ - DDR Controller
+ - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
+ chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
+ with FSL refernce software is 2100MT/s
+ - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
+ - IFC/Local Bus
+ - One 2 GB NAND flash with ECC support, not as boot source
+ - CPLD of size 2K
+ - USB 3.0
+ - Two high speed USB 3.0 ports
+ - First USB 3.0 port configured as Host with Type-A connector
+ - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC/eMMC
+ - SDHC slot and onboard eMMC are muxed together
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - 2 UART
+ - JTAG support
+ - QSPI emulator support
+ - TDM riser support
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c
new file mode 100644
index 0000000..f37cea0
--- /dev/null
+++ b/board/freescale/ls1088a/ddr.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/clock.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 1) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ /*
+ * we use identical timing for all slots. If needed, change the code
+ * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+ */
+ pbsp = udimms[0];
+
+ /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found for %lu MT/s\n",
+ ddr_freq);
+ printf("Trying to use the highest speed (%u) parameters\n",
+ pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+ "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+ pbsp->wrlvl_ctl_3);
+
+
+
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* Enable DDR hashing */
+ popts->addr_hash = 1;
+
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
+
+}
+
+
+int fsl_initdram()
+{
+
+
+ puts("Initializing DDR....using SPD\n");
+
+ gd->ram_size = fsl_ddr_sdram();
+
+
+ return 0;
+}
diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h
new file mode 100644
index 0000000..dfcfc1f
--- /dev/null
+++ b/board/freescale/ls1088a/ddr.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1088A_DDR_H__
+#define __LS1088A_DDR_H__
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+#if defined(CONFIG_TARGET_LS1088ARDB)
+
+ {2, 1666, 0, 8, 8, 0x090A0B0E, 0x0F10110D,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2300, 0, 8, 9, 0x0A0C0E11, 0x1214160F,},
+ {}
+
+#endif
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+#endif
diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c
new file mode 100644
index 0000000..91f1b45
--- /dev/null
+++ b/board/freescale/ls1088a/eth_ls1088ardb.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MC_BOOT_ENV_VAR "mcinitcmd"
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+ char *mc_boot_env_var;
+ int i, interface;
+ struct memac_mdio_info mdio_info;
+ struct mii_dev *dev;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ struct memac_mdio_controller *reg;
+ u32 srds_s1, cfg;
+
+ cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
+ FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+ cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
+
+ srds_s1 = serdes_get_number(FSL_SRDS_1, cfg);
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+ /* Register the EMI 1 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+ /* Register the EMI 2 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ switch (srds_s1) {
+ case 0x1D:
+ /*
+ * XFI does not need a PHY to work, but to avoid U-boot use
+ * default PHY address which is zero to a MAC when it found
+ * a MAC has no PHY address, we give a PHY address to XFI
+ * MAC error.
+ */
+ wriop_set_phy_address(WRIOP1_DPMAC1, 0x0a);
+ wriop_set_phy_address(WRIOP1_DPMAC2, AQ_PHY_ADDR1);
+ wriop_set_phy_address(WRIOP1_DPMAC3, QSGMII1_PORT1_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC4, QSGMII1_PORT2_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC5, QSGMII1_PORT3_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC6, QSGMII1_PORT4_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC7, QSGMII2_PORT1_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC8, QSGMII2_PORT2_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC9, QSGMII2_PORT3_PHY_ADDR);
+ wriop_set_phy_address(WRIOP1_DPMAC10, QSGMII2_PORT4_PHY_ADDR);
+
+ break;
+ default:
+ printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n",
+ srds_s1);
+ break;
+ }
+
+ for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) {
+ interface = wriop_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_QSGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+ wriop_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+ wriop_set_mdio(WRIOP1_DPMAC2, dev);
+
+ mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
+ if (mc_boot_env_var)
+ run_command_list(mc_boot_env_var, -1, 0);
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
new file mode 100644
index 0000000..f3c20ac
--- /dev/null
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ifc.h>
+#include <fsl_ddr.h>
+#include <fsl_sec.h>
+#include <asm/io.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#include <asm/arch/ppa.h>
+
+#include "../common/qixis.h"
+#include "ls1088a_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long long get_qixis_addr(void)
+{
+ unsigned long long addr;
+
+ if (gd->flags & GD_FLG_RELOC)
+ addr = QIXIS_BASE_PHYS;
+ else
+ addr = QIXIS_BASE_PHYS_EARLY;
+
+ /*
+ * IFC address under 256MB is mapped to 0x30000000, any address above
+ * is mapped to 0x5_10000000 up to 4GB.
+ */
+ addr = addr > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
+
+ return addr;
+}
+
+int checkboard(void)
+{
+ char buf[64];
+ u8 sw;
+ static const char *const freq[] = {"100", "125", "156.25",
+ "100 separate SSCG"};
+ int clock;
+
+
+ printf("Board: LS1088A-RDB, ");
+
+ sw = QIXIS_READ(arch);
+ printf("Board Arch: V%d, ", sw >> 4);
+
+ printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
+
+
+ memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+#ifdef CONFIG_SD_BOOT
+ puts("SD card\n");
+#endif
+ switch (sw) {
+
+ case 0:
+
+ puts("QSPI:");
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT;
+ if (sw == 0 || sw == 4)
+ puts("0\n");
+ else if (sw == 1)
+ puts("1\n");
+ else
+ puts("EMU\n");
+ break;
+
+ default:
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+ break;
+ }
+
+
+ printf("CPLD: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+
+
+ /*
+ * Display the actual SERDES reference clocks as configured by the
+ * dip switches on the board. Note that the SWx registers could
+ * technically be set to force the reference clocks to match the
+ * values that the SERDES expects (or vice versa). For now, however,
+ * we just display both values and hope the user notices when they
+ * don't match.
+ */
+ puts("SERDES1 Reference : ");
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = (sw >> 6) & 3;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = (sw >> 4) & 3;
+ printf("Clock2 = %sMHz", freq[clock]);
+
+ puts("\nSERDES2 Reference : ");
+ clock = (sw >> 2) & 3;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = (sw >> 0) & 3;
+ printf("Clock2 = %sMHz\n", freq[clock]);
+
+ return 0;
+}
+
+bool if_board_diff_clk(void)
+{
+
+ u8 diff_conf = QIXIS_READ(dutcfg[11]);
+ return diff_conf & 0x80;
+
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0f) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ if (if_board_diff_clk())
+ return get_board_sys_clk();
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+
+ return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+void board_retimer_init(void)
+{
+ u8 reg;
+
+ /* Retimer is connected to I2C1_CH5 */
+ select_i2c_ch_pca9547(I2C_MUX_CH5);
+
+ /* Access to Control/Shared register */
+ reg = 0x0;
+ i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
+
+ /* Read device revision and ID */
+ i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1);
+ debug("Retimer version id = 0x%x\n", reg);
+
+ /* Enable Broadcast. All writes target all channel register sets */
+ reg = 0x0c;
+ i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
+
+ /* Reset Channel Registers */
+ i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1);
+ reg |= 0x4;
+ i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1);
+
+ /* Set data rate as 10.3125 Gbps */
+ reg = 0x90;
+ i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1);
+ reg = 0xb3;
+ i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1);
+ reg = 0x90;
+ i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1);
+ reg = 0xb3;
+ i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1);
+ reg = 0xcd;
+ i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1);
+
+ /* Select VCO Divider to full rate (000) */
+ i2c_read(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1);
+ reg &= 0x0f;
+ reg |= 0x70;
+ i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1);
+
+
+ /*return the default channel*/
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+}
+
+int board_init(void)
+{
+ init_final_memctl_regs();
+#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+ u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
+#endif
+
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ board_retimer_init();
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+ /* invert AQR105 IRQ pins polarity */
+ out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK);
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ fsl_lsch3_early_init_f();
+ return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+ puts("\nDDR ");
+ print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+ print_ddr_info(0);
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_MC_ENET
+void fdt_fixup_board_enet(void *fdt)
+{
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/fsl-mc");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/fsl,dprc at 0");
+
+ if (offset < 0) {
+ printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+ __func__, offset);
+ return;
+ }
+
+ if (get_mc_boot_status() == 0)
+ fdt_status_okay(fdt, offset);
+ else
+ fdt_status_fail(fdt, offset);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ int err, i;
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ ft_cpu_setup(blob, bd);
+
+ /* fixup DT for the two GPP DDR banks */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ base[i] = gd->bd->bi_dram[i].start;
+ size[i] = gd->bd->bi_dram[i].size;
+ }
+
+#ifdef CONFIG_RESV_RAM
+ /* reduce size if reserved memory is within this bank */
+ if (gd->arch.resv_ram >= base[0] &&
+ gd->arch.resv_ram < base[0] + size[0])
+ size[0] = gd->arch.resv_ram - base[0];
+ else if (gd->arch.resv_ram >= base[1] &&
+ gd->arch.resv_ram < base[1] + size[1])
+ size[1] = gd->arch.resv_ram - base[1];
+#endif
+
+ fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+
+#ifdef CONFIG_FSL_MC_ENET
+ fdt_fixup_board_enet(blob);
+ err = fsl_mc_ldpaa_exit(bd);
+ if (err)
+ return err;
+#endif
+
+ return 0;
+}
+#endif
diff --git a/board/freescale/ls1088a/ls1088a_qixis.h b/board/freescale/ls1088a/ls1088a_qixis.h
new file mode 100644
index 0000000..9757d1b
--- /dev/null
+++ b/board/freescale/ls1088a/ls1088a_qixis.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1088AQDS_QIXIS_H__
+#define __LS1088AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1088AQDS */
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+/* BRDCFG2 - SD clock*/
+#define QIXIS_SDCLK1_100 0x0
+#define QIXIS_SDCLK1_125 0x1
+#define QIXIS_SDCLK1_165 0x2
+#define QIXIS_SDCLK1_100_SP 0x3
+
+#endif
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
new file mode 100644
index 0000000..33e4124
--- /dev/null
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_FSL_LS_PPA=y
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
new file mode 100644
index 0000000..d01095e
--- /dev/null
+++ b/include/configs/ls1088a_common.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1088_COMMON_H
+#define __LS1088_COMMON_H
+
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_MP
+
+#include <asm/arch/stream_id_lsch3.h>
+#include <asm/arch/config.h>
+#include <asm/arch/soc.h>
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+
+/* Link Definitions */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x30100000
+#endif
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
+/*
+ * SMP Definitinos
+ */
+#define CPU_RELEASE_ADDR secondary_boot_func
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* IFC */
+#define CONFIG_FSL_IFC
+
+/*
+ * During booting, IFC is mapped at the region of 0x30000000.
+ * But this region is limited to 256MB. To accommodate NOR, promjet
+ * and FPGA. This region is divided as below:
+ * 0x30000000 - 0x37ffffff : 128MB : NOR flash
+ * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
+ * 0x3C000000 - 0x40000000 : 64MB : FPGA etc
+ *
+ * To accommodate bigger NOR flash and other devices, we will map IFC
+ * chip selects to as below:
+ * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
+ * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
+ * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
+ * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
+ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
+ *
+ * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
+ * CONFIG_SYS_FLASH_BASE has the final address (core view)
+ * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ */
+
+#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
+#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
+#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
+
+#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
+#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
+
+#ifndef __ASSEMBLY__
+unsigned long long get_qixis_addr(void);
+#endif
+
+#define QIXIS_BASE get_qixis_addr()
+#define QIXIS_BASE_PHYS 0x20000000
+#define QIXIS_BASE_PHYS_EARLY 0xC000000
+
+
+#define CONFIG_SYS_NAND_BASE 0x530000000ULL
+#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
+
+
+/* MC firmware */
+/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
+#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
+#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
+#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
+#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
+#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
+#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
+/*
+ * Carve out a DDR region which will not be used by u-boot/Linux
+ *
+ * It will be used by MC and Debug Server. The MC region must be
+ * 512MB aligned, so the min size to hide is 512MB.
+ */
+
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
+#endif
+
+#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
+
+/* Command line configuration */
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_CACHE
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+/* #define CONFIG_DISPLAY_CPUINFO */
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x581000000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "console=ttyAMA0,38400n8\0" \
+ "mcinitcmd=fsl_mc start mc 0x580a00000" \
+ " 0x580e00000 \0"
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
+ "earlycon=uart8250,mmio,0x21c0500 " \
+ "ramdisk_size=0x3000000 default_hugepagesz=2m" \
+ " hugepagesz=2m hugepages=256"
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read 0x80200000 0xd00000 0x100000;"\
+ " fsl_mc apply dpl 0x80200000 &&" \
+ " sf read $kernel_load $kernel_start" \
+ " $kernel_size && bootm $kernel_load"
+#else /* NOR BOOT*/
+#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \
+ " cp.b $kernel_start $kernel_load" \
+ " $kernel_size && bootm $kernel_load"
+#endif
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#endif /* __LS1088_COMMON_H */
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
new file mode 100644
index 0000000..d943fa4
--- /dev/null
+++ b/include/configs/ls1088ardb.h
@@ -0,0 +1,316 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1088A_RDB_H
+#define __LS1088A_RDB_H
+
+#include "ls1088a_common.h"
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
+#define CONFIG_ENV_SECT_SIZE 0x40000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x20000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_QIXIS_I2C_ACCESS
+#define SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+#define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */
+#define COUNTER_FREQUENCY 25000000 /* 25MHz */
+
+#define CONFIG_DDR_SPD
+#ifdef CONFIG_EMU
+#define CONFIG_SYS_FSL_DDR_EMU
+#define CONFIG_SYS_MXC_I2C1_SPEED 40000000
+#define CONFIG_SYS_MXC_I2C2_SPEED 40000000
+#else
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+#define SPD_EEPROM_ADDRESS 0x51
+#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+
+
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
+#define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64 * 1024 * 1024)
+
+#define CONFIG_SYS_NOR0_CSPR \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR0_CSPR_EARLY \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(6)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
+ FTIM0_NOR_TEADC(0x1) | \
+ FTIM0_NOR_TEAHC(0x1))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
+ FTIM1_NOR_TRAD_NOR(0x1))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
+ FTIM2_NOR_TCH(0x0) | \
+ FTIM2_NOR_TWP(0x1))
+#define CONFIG_SYS_NOR_FTIM3 0x04000000
+#define CONFIG_SYS_IFC_CCR 0x01000000
+
+#ifndef SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#endif
+#endif
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 256
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+#define CONFIG_FSL_QIXIS
+#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
+#define QIXIS_LBMAP_SWITCH 2
+#define QIXIS_QMAP_MASK 0xe0
+#define QIXIS_QMAP_SHIFT 5
+#define QIXIS_LBMAP_MASK 0x1f
+#define QIXIS_LBMAP_SHIFT 5
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x20
+#define QIXIS_LBMAP_SD 0x00
+#define QIXIS_LBMAP_SD_QSPI 0x00
+#define QIXIS_LBMAP_QSPI 0x00
+#define QIXIS_RCW_SRC_SD 0x40
+#define QIXIS_RCW_SRC_QSPI 0x62
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
+
+#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
+#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+
+#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024)
+#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0)
+/* QIXIS Timing parameters*/
+#define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
+ FTIM2_GPCM_TCH(0xf) | \
+ FTIM2_GPCM_TWP(0x3E))
+#define SYS_FPGA_CS_FTIM3 0x0
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#endif
+
+
+#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+
+/*
+ * I2C bus multiplexer
+ */
+#define I2C_MUX_PCA_ADDR_PRI 0x77
+#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */
+#define I2C_RETIMER_ADDR 0x18
+#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH5 0xD
+/*
+* RTC configuration
+*/
+#define RTC
+#define CONFIG_RTC_PCF8563 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/
+#define CONFIG_CMD_DATE
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* QSPI device */
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 26)
+#define FSL_QSPI_FLASH_NUM 2
+#endif
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#define CONFIG_FSL_MEMAC
+
+/* Initial environment variables */
+#if defined(CONFIG_QSPI_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x90100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x1000000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000 \0"
+
+#endif
+
+/* MAC/PHY configuration */
+#ifdef CONFIG_FSL_MC_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_AQUANTIA
+#define AQ_PHY_ADDR1 0x00
+#define AQR105_IRQ_MASK 0x00000004
+
+#define QSGMII1_PORT1_PHY_ADDR 0x0c
+#define QSGMII1_PORT2_PHY_ADDR 0x0d
+#define QSGMII1_PORT3_PHY_ADDR 0x0e
+#define QSGMII1_PORT4_PHY_ADDR 0x0f
+#define QSGMII2_PORT1_PHY_ADDR 0x1c
+#define QSGMII2_PORT2_PHY_ADDR 0x1d
+#define QSGMII2_PORT3_PHY_ADDR 0x1e
+#define QSGMII2_PORT4_PHY_ADDR 0x1f
+
+#define CONFIG_MII
+#define CONFIG_ETHPRIME "DPMAC1 at xgmii"
+#define CONFIG_PHY_GIGE
+#endif
+
+/* MMC */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+#undef CONFIG_CMDLINE_EDITING
+#include <config_distro_defaults.h>
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(USB, usb, 0) \
+ func(MMC, mmc, 0) \
+ func(SCSI, scsi, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1088A_RDB_H */
--
2.7.4
More information about the U-Boot
mailing list