[U-Boot] [EXTERNAL] Re: [U-Boot, v3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
Jaehoon Chung
jh80.chung at samsung.com
Fri Aug 18 08:43:31 UTC 2017
Hi JJ,
On 08/18/2017 05:41 PM, Jean-Jacques Hiblot wrote:
> Hi Jaehoon,
>
>
> On 18/08/2017 08:52, Jaehoon Chung wrote:
>> Dear JJ,
>>
>> On 08/07/2017 06:43 PM, Jean-Jacques Hiblot wrote:
>>> In the TI SOCs a PBIAS cell exists to provide a bias voltage to the MMC1
>>> IO cells. Without this bias voltage these I/O cells can not function
>>> properly. The PBIAS cell is controlled by software.
>>>
>>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
>>> Reviewed-by: Tom Rini <trini at konsulko.com>
>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>> There is an error..
>>
>> arm: + am57xx_evm
>> +drivers/power/regulator/built-in.o: In function `pbias_regulator_probe':
>> +drivers/power/regulator/pbias_regulator.c:196: undefined reference to `dev_read_string_index'
>>
>> i didn't find the dev_read_string_index()..Is there any patch?
> This function has been defined in patch : "[PATCH v2 1/3] dm: core: Add functions to get strings and the string count from a stringlist"
> I thought it was already applied to u-boot-mmc.
Will check. Thanks for sharing it.
Best Regards,
Jaehoon Chung
>
> Thanks,
> Jean-Jacques
>
>> Best Regards,
>> Jaehoon Chung
>>
>>> ---
>>>
>>> Hi Jaehoon,
>>>
>>> Here is the patch for the PBIAS regulator. I modified the KConfig to select
>>> the REGMAP and SYSCON features as you suggested.
>>> Thanks.
>>> JJ
>>>
>>> changes since v2:
>>> - automatically select REGMAP and SYSCON if PBIAS is selected.
>>>
>>> changes since v1:
>>> - automatically select the PBIAS driver if DM_REGULATOR, DM_MMC and
>>> MMC_OMAP_HS are set
>>> - use the dev_read_*() API to access the DT
>>>
>>>
>>> drivers/mmc/Kconfig | 1 +
>>> drivers/power/regulator/Kconfig | 13 ++
>>> drivers/power/regulator/Makefile | 1 +
>>> drivers/power/regulator/pbias_regulator.c | 302 ++++++++++++++++++++++++++++++
>>> 4 files changed, 317 insertions(+)
>>> create mode 100644 drivers/power/regulator/pbias_regulator.c
>>>
>>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
>>> index 588e118..63e1122 100644
>>> --- a/drivers/mmc/Kconfig
>>> +++ b/drivers/mmc/Kconfig
>>> @@ -158,6 +158,7 @@ config MMC_PCI
>>> config MMC_OMAP_HS
>>> bool "TI OMAP High Speed Multimedia Card Interface support"
>>> select DM_MMC_OPS if DM_MMC
>>> + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
>>> help
>>> This selects the TI OMAP High Speed Multimedia card Interface.
>>> If you have an omap2plus board with a Multimedia Card slot,
>>> diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
>>> index f213487..cb5ea08 100644
>>> --- a/drivers/power/regulator/Kconfig
>>> +++ b/drivers/power/regulator/Kconfig
>>> @@ -142,6 +142,19 @@ config DM_REGULATOR_PALMAS
>>> features for REGULATOR PALMAS and the family of PALMAS PMICs.
>>> The driver implements get/set api for: value and enable.
>>> +config DM_REGULATOR_PBIAS
>>> + bool "Enable driver for PBIAS regulator"
>>> + depends on DM_REGULATOR
>>> + select REGMAP
>>> + select SYSCON
>>> + ---help---
>>> + This enables implementation of driver-model regulator uclass
>>> + features for pseudo-regulator PBIAS found in the OMAP SOCs.
>>> + This pseudo-regulator is used to provide a BIAS voltage to MMC1
>>> + signal pads and must be configured properly during a voltage switch.
>>> + Voltage switching is required by some operating modes of SDcards and
>>> + eMMC.
>>> +
>>> config DM_REGULATOR_LP873X
>>> bool "Enable driver for LP873X PMIC regulators"
>>> depends on PMIC_LP873X
>>> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
>>> index ce14d08..75d611a 100644
>>> --- a/drivers/power/regulator/Makefile
>>> +++ b/drivers/power/regulator/Makefile
>>> @@ -17,5 +17,6 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
>>> obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o
>>> obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o
>>> obj-$(CONFIG_$(SPL_)DM_REGULATOR_PALMAS) += palmas_regulator.o
>>> +obj-$(CONFIG_$(SPL_)DM_REGULATOR_PBIAS) += pbias_regulator.o
>>> obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
>>> obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
>>> diff --git a/drivers/power/regulator/pbias_regulator.c b/drivers/power/regulator/pbias_regulator.c
>>> new file mode 100644
>>> index 0000000..303eca9
>>> --- /dev/null
>>> +++ b/drivers/power/regulator/pbias_regulator.c
>>> @@ -0,0 +1,302 @@
>>> +/*
>>> + * (C) Copyright 2016 Texas Instruments Incorporated, <www.ti.com>
>>> + * Jean-Jacques Hiblot <jjhiblot at ti.com>
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <errno.h>
>>> +#include <dm.h>
>>> +#include <power/pmic.h>
>>> +#include <power/regulator.h>
>>> +#include <regmap.h>
>>> +#include <syscon.h>
>>> +#include <linux/bitops.h>
>>> +#include <linux/ioport.h>
>>> +#include <dm/read.h>
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +struct pbias_reg_info {
>>> + u32 enable;
>>> + u32 enable_mask;
>>> + u32 disable_val;
>>> + u32 vmode;
>>> + unsigned int enable_time;
>>> + char *name;
>>> +};
>>> +
>>> +struct pbias_priv {
>>> + struct regmap *regmap;
>>> + int offset;
>>> +};
>>> +
>>> +static const struct pmic_child_info pmic_children_info[] = {
>>> + { .prefix = "pbias", .driver = "pbias_regulator"},
>>> + { },
>>> +};
>>> +
>>> +static int pbias_write(struct udevice *dev, uint reg, const uint8_t *buff,
>>> + int len)
>>> +{
>>> + struct pbias_priv *priv = dev_get_priv(dev);
>>> + uint32_t val = *(uint32_t *)buff;
>>> +
>>> + if (len != 4)
>>> + return -EINVAL;
>>> +
>>> + return regmap_write(priv->regmap, priv->offset, val);
>>> +}
>>> +
>>> +static int pbias_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
>>> +{
>>> + struct pbias_priv *priv = dev_get_priv(dev);
>>> +
>>> + if (len != 4)
>>> + return -EINVAL;
>>> +
>>> + return regmap_read(priv->regmap, priv->offset, (uint32_t *)buff);
>>> +}
>>> +
>>> +static int pbias_ofdata_to_platdata(struct udevice *dev)
>>> +{
>>> + struct pbias_priv *priv = dev_get_priv(dev);
>>> + struct udevice *syscon;
>>> + struct regmap *regmap;
>>> + struct resource res;
>>> + int err;
>>> +
>>> + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
>>> + "syscon", &syscon);
>>> + if (err) {
>>> + error("%s: unable to find syscon device (%d)\n", __func__,
>>> + err);
>>> + return err;
>>> + }
>>> +
>>> + regmap = syscon_get_regmap(syscon);
>>> + if (IS_ERR(regmap)) {
>>> + error("%s: unable to find regmap (%ld)\n", __func__,
>>> + PTR_ERR(regmap));
>>> + return PTR_ERR(regmap);
>>> + }
>>> + priv->regmap = regmap;
>>> +
>>> + err = dev_read_resource(dev, 0, &res);
>>> + if (err) {
>>> + error("%s: unable to find offset (%d)\n", __func__, err);
>>> + return err;
>>> + }
>>> + priv->offset = res.start;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int pbias_bind(struct udevice *dev)
>>> +{
>>> + int children;
>>> +
>>> + children = pmic_bind_children(dev, dev->node, pmic_children_info);
>>> + if (!children)
>>> + debug("%s: %s - no child found\n", __func__, dev->name);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct dm_pmic_ops pbias_ops = {
>>> + .read = pbias_read,
>>> + .write = pbias_write,
>>> +};
>>> +
>>> +static const struct udevice_id pbias_ids[] = {
>>> + { .compatible = "ti,pbias-dra7" },
>>> + { }
>>> +};
>>> +
>>> +U_BOOT_DRIVER(pbias_pmic) = {
>>> + .name = "pbias_pmic",
>>> + .id = UCLASS_PMIC,
>>> + .of_match = pbias_ids,
>>> + .bind = pbias_bind,
>>> + .ops = &pbias_ops,
>>> + .ofdata_to_platdata = pbias_ofdata_to_platdata,
>>> + .priv_auto_alloc_size = sizeof(struct pbias_priv),
>>> +};
>>> +
>>> +static const struct pbias_reg_info pbias_mmc_omap2430 = {
>>> + .enable = BIT(1),
>>> + .enable_mask = BIT(1),
>>> + .vmode = BIT(0),
>>> + .disable_val = 0,
>>> + .enable_time = 100,
>>> + .name = "pbias_mmc_omap2430"
>>> +};
>>> +
>>> +static const struct pbias_reg_info pbias_sim_omap3 = {
>>> + .enable = BIT(9),
>>> + .enable_mask = BIT(9),
>>> + .vmode = BIT(8),
>>> + .enable_time = 100,
>>> + .name = "pbias_sim_omap3"
>>> +};
>>> +
>>> +static const struct pbias_reg_info pbias_mmc_omap4 = {
>>> + .enable = BIT(26) | BIT(22),
>>> + .enable_mask = BIT(26) | BIT(25) | BIT(22),
>>> + .disable_val = BIT(25),
>>> + .vmode = BIT(21),
>>> + .enable_time = 100,
>>> + .name = "pbias_mmc_omap4"
>>> +};
>>> +
>>> +static const struct pbias_reg_info pbias_mmc_omap5 = {
>>> + .enable = BIT(27) | BIT(26),
>>> + .enable_mask = BIT(27) | BIT(25) | BIT(26),
>>> + .disable_val = BIT(25),
>>> + .vmode = BIT(21),
>>> + .enable_time = 100,
>>> + .name = "pbias_mmc_omap5"
>>> +};
>>> +
>>> +static const struct pbias_reg_info *pbias_reg_infos[] = {
>>> + &pbias_mmc_omap5,
>>> + &pbias_mmc_omap4,
>>> + &pbias_sim_omap3,
>>> + &pbias_mmc_omap2430,
>>> + NULL
>>> +};
>>> +
>>> +
>>> +static int pbias_regulator_probe(struct udevice *dev)
>>> +{
>>> + const struct pbias_reg_info **p = pbias_reg_infos;
>>> + struct dm_regulator_uclass_platdata *uc_pdata;
>>> +
>>> + uc_pdata = dev_get_uclass_platdata(dev);
>>> +
>>> +
>>> + while (*p) {
>>> + int rc;
>>> + rc = dev_read_stringlist_search(dev, "regulator-name",
>>> + (*p)->name);
>>> + if (rc >= 0) {
>>> + debug("found regulator %s\n", (*p)->name);
>>> + break;
>>> + } else if (rc != -ENODATA) {
>>> + return rc;
>>> + }
>>> + p++;
>>> + }
>>> + if (!*p) {
>>> + int i = 0;
>>> + const char *s;
>>> +
>>> + debug("regulator ");
>>> + while (dev_read_string_index(dev, "regulator-name", i++, &s) >= 0)
>>> + debug("%s'%s' ", (i > 1) ? ", " : "", s);
>>> + debug("%s not supported\n", (i > 2) ? "are" : "is");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + uc_pdata->type = REGULATOR_TYPE_OTHER;
>>> + dev->priv = (void *)*p;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int pbias_regulator_get_value(struct udevice *dev)
>>> +{
>>> + const struct pbias_reg_info *p = dev_get_priv(dev);
>>> + int rc;
>>> + uint32_t reg;
>>> +
>>> + rc = pmic_read(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> + if (rc)
>>> + return rc;
>>> +
>>> + debug("%s voltage id %s\n", p->name,
>>> + (reg & p->vmode) ? "3.0v" : "1.8v");
>>> + return (reg & p->vmode) ? 3000000 : 1800000;
>>> +}
>>> +
>>> +static int pbias_regulator_set_value(struct udevice *dev, int uV)
>>> +{
>>> + const struct pbias_reg_info *p = dev_get_priv(dev);
>>> + int rc;
>>> + uint32_t reg;
>>> +
>>> + debug("Setting %s voltage to %s\n", p->name,
>>> + (reg & p->vmode) ? "3.0v" : "1.8v");
>>> +
>>> + rc = pmic_read(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> + if (rc)
>>> + return rc;
>>> +
>>> + if (uV == 3000000)
>>> + reg |= p->vmode;
>>> + else if (uV == 1800000)
>>> + reg &= ~p->vmode;
>>> + else
>>> + return -EINVAL;
>>> +
>>> + return pmic_write(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> +}
>>> +
>>> +static int pbias_regulator_get_enable(struct udevice *dev)
>>> +{
>>> + const struct pbias_reg_info *p = dev_get_priv(dev);
>>> + int rc;
>>> + uint32_t reg;
>>> +
>>> + rc = pmic_read(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> + if (rc)
>>> + return rc;
>>> +
>>> + debug("%s id %s\n", p->name,
>>> + (reg & p->enable_mask) == (p->disable_val) ? "on" : "off");
>>> +
>>> + return (reg & p->enable_mask) == (p->disable_val);
>>> +}
>>> +
>>> +static int pbias_regulator_set_enable(struct udevice *dev, bool enable)
>>> +{
>>> + const struct pbias_reg_info *p = dev_get_priv(dev);
>>> + int rc;
>>> + uint32_t reg;
>>> +
>>> + debug("Turning %s %s\n", enable ? "on" : "off", p->name);
>>> +
>>> + rc = pmic_read(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> + if (rc)
>>> + return rc;
>>> +
>>> + reg &= ~p->enable_mask;
>>> + if (enable)
>>> + reg |= p->enable;
>>> + else
>>> + reg |= p->disable_val;
>>> +
>>> + rc = pmic_write(dev->parent, 0, (uint8_t *)®, sizeof(reg));
>>> + if (rc)
>>> + return rc;
>>> +
>>> + if (enable)
>>> + udelay(p->enable_time);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct dm_regulator_ops pbias_regulator_ops = {
>>> + .get_value = pbias_regulator_get_value,
>>> + .set_value = pbias_regulator_set_value,
>>> + .get_enable = pbias_regulator_get_enable,
>>> + .set_enable = pbias_regulator_set_enable,
>>> +};
>>> +
>>> +U_BOOT_DRIVER(pbias_regulator) = {
>>> + .name = "pbias_regulator",
>>> + .id = UCLASS_REGULATOR,
>>> + .ops = &pbias_regulator_ops,
>>> + .probe = pbias_regulator_probe,
>>> +};
>>>
>>
>
>
>
>
More information about the U-Boot
mailing list