[U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s

[Santan Kumar]

 As per updated board design, different QSPI flash
 is connected on boards, hence change QSPI flash type
 from Micron n25q512a device to spansion s25fs512s
 device in dts and config.

Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
This patch is split version of another patch
 https://patchwork.ozlabs.org/patch/779931/

 arch/arm/dts/fsl-ls2081a-rdb.dts | 4 ++--
 include/configs/ls2080ardb.h     | 6 +-----
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/dts/fsl-ls2081a-rdb.dts b/arch/arm/dts/fsl-ls2081a-rdb.dts
index 6489362..aa4aa68 100644
--- a/arch/arm/dts/fsl-ls2081a-rdb.dts
+++ b/arch/arm/dts/fsl-ls2081a-rdb.dts
@@ -41,7 +41,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	qflash0: n25q512a at 0 {
+	qflash0: s25fs512s at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-flash";
@@ -49,7 +49,7 @@
 		reg = <0>;
 	};
 
-	qflash1: n25q512a at 1 {
+	qflash1: s25fs512s at 1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-flash";
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2dab065..9b9a710 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -293,19 +293,15 @@ unsigned long get_board_sys_clk(void);
 /* SPI */
 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
 #define CONFIG_SPI_FLASH
-#ifdef CONFIG_FSL_QSPI
+#ifdef CONFIG_FSL_DSPI
 #define CONFIG_SPI_FLASH_STMICRO
 #endif
 #ifdef CONFIG_FSL_QSPI
-#ifdef CONFIG_TARGET_LS2081ARDB
-#define CONFIG_SPI_FLASH_STMICRO
-#else
 #define CONFIG_SPI_FLASH_SPANSION
 #endif
 #define FSL_QSPI_FLASH_SIZE		SZ_64M	/* 64MB */
 #define FSL_QSPI_FLASH_NUM		2
 #endif
-#endif
 
 /*
  * RTC configuration
-- 
1.9.1