[U-Boot] [PATCH 1/1] board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATE

[Poonam Aggrwal]

-----Original Message-----
From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Prabhakar Kushwaha
Sent: Friday, August 18, 2017 3:53 PM
To: Santan Kumar <santan.kumar at nxp.com>; u-boot at lists.denx.de; York Sun <york.sun at nxp.com>
Cc: Priyanka Jain <priyanka.jain at nxp.com>
Subject: Re: [U-Boot] [PATCH 1/1] board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATE


> -----Original Message-----
> From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Santan 
> Kumar
> Sent: Friday, August 18, 2017 3:21 PM
> To: u-boot at lists.denx.de; York Sun <york.sun at nxp.com>
> Cc: Priyanka Jain <priyanka.jain at nxp.com>
> Subject: [U-Boot] [PATCH 1/1] board/ls2080ardb: Remove 
> CONFIG_DISPLAY_BOARDINFO_LATE
> 
> CONFIG_DISPLAY_BOARDINFO_LATE config is used to delay the prints of 
> boardinfo late in cycle during uboot boot.
> This feature is not required in case of QSPI_BOOT.
> 
I am not aware of the history of the change, but the patch description does not sufficiently describe why this change has been done. Why in case of QSPI Boot BOARD information is not required to be printed late.
> Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
> Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
> ---

Reviewed-by : Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com> _______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot