[U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s

[Santan Kumar]

> -----Original Message-----
> From: Prabhakar Kushwaha
> Sent: Friday, August 18, 2017 3:52 PM
> To: Santan Kumar <santan.kumar at nxp.com>; u-boot at lists.denx.de; York
> Sun <york.sun at nxp.com>
> Cc: Priyanka Jain <priyanka.jain at nxp.com>
> Subject: RE: [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type
> from n25q512a to s25fs512s
> 
> 
> > -----Original Message-----
> > From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Santan
> > Kumar
> > Sent: Friday, August 18, 2017 3:21 PM
> > To: u-boot at lists.denx.de; York Sun <york.sun at nxp.com>
> > Cc: Priyanka Jain <priyanka.jain at nxp.com>
> > Subject: [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type
> > from n25q512a to s25fs512s
> >
> >  As per updated board design, different QSPI flash  is connected on
> > boards, hence change QSPI flash type  from Micron n25q512a device to
> > spansion s25fs512s  device in dts and config.
> 
> How backward compatibility with older boards being managed?
>  
> 
> --prabhakar
>>[Santan] All older board are using Spansion flash. Initially Micron flash was planned to place in LS2081ARDB board but at last moment flash was changed.