[U-Boot] [PATCH] sunxi: usb_phy: invert the USB phy_ctl condition

[Maxime Ripard]

All the new SoCs from Allwinner since the A33 have had the phy_ctl offset
at 0x410 instead of 0x404 that was used on the previous SoCs.

Instead of adding more and more special cases as the number of SoCs grow,
let's invert the test to have 0x410 by default, and the (hopefully) fixed
number of old SoCs being the exception.

Suggested-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>
Suggested-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/mach-sunxi/usb_phy.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index 9bf0b5633d4a..2f1cad1aad9e 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -18,12 +18,18 @@
 #include <asm/io.h>
 #include <errno.h>
 
-#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
-#ifdef CONFIG_MACH_SUN8I_A33
-#define SUNXI_USB_CSR			0x410
-#else
+#if defined(CONFIG_MACH_SUN4I) ||		   \
+	defined(CONFIG_MACH_SUN5I) ||		   \
+	defined(CONFIG_MACH_SUN6I) ||		   \
+	defined(CONFIG_MACH_SUN7I) ||		   \
+	defined(CONFIG_MACH_SUN8I_A23) ||	   \
+	defined(CONFIG_MACH_SUN9I)
 #define SUNXI_USB_CSR			0x404
+#else
+#define SUNXI_USB_CSR			0x410
 #endif
+
+#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
 #define SUNXI_USB_PASSBY_EN		1
 
 #define SUNXI_EHCI_AHB_ICHR8_EN		(1 << 10)
-- 
2.13.5