[U-Boot] [PATCH v1 2/2] imx: use BOOT_DEVICE_BOARD instead of UART
Stefano Babic
sbabic at denx.de
Fri Aug 25 11:33:03 UTC 2017
On 16/08/2017 02:49, Stefan Agner wrote:
> From: Stefan Agner <stefan.agner at toradex.com>
>
> i.MX 6 serial downloader is not necessarily booting via UART but can
> also boot from USB. In fact only some i.MX chips have serial
> downloader support via UART (e.g. 6UL/ULL and Vybrid) but all of
> them have serial downloader support via USB. Use the more appropriate
> BOOT_DEVICE_BOARD define which is used for ROM provided recovery
> mechanisms in general.
>
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> ---
>
> arch/arm/mach-imx/spl.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
> index 836b334fa9..bcd1033fdb 100644
> --- a/arch/arm/mach-imx/spl.c
> +++ b/arch/arm/mach-imx/spl.c
> @@ -27,7 +27,7 @@ u32 spl_boot_device(void)
> * BOOT_MODE - see IMX6DQRM Table 8-1
> */
> if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
> - return BOOT_DEVICE_UART;
> + return BOOT_DEVICE_BOARD;
>
> /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
> switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
> @@ -43,7 +43,7 @@ u32 spl_boot_device(void)
> }
> /* Reserved: Used to force Serial Downloader */
> case IMX6_BMODE_RESERVED:
> - return BOOT_DEVICE_UART;
> + return BOOT_DEVICE_BOARD;
> /* SATA: See 8.5.4, Table 8-20 */
> case IMX6_BMODE_SATA:
> return BOOT_DEVICE_SATA;
>
Applied to u-boot-imx, -master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list