[U-Boot] [PATCH 2/6] ARM: uniphier: move PLLCTRL register macros to each SoC .c file

[Masahiro Yamada]

The new SoC PXs3 changed the address of PLL, but still uses the
same PLL name.  We can not define SC_*PLLCTRL in the common header.
Move them to per-SoC .c file.  Also, fix some PLL comments.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/clk/pll-ld11.c | 11 +++++++++++
 arch/arm/mach-uniphier/clk/pll-ld20.c | 19 +++++++++++++++++++
 arch/arm/mach-uniphier/sc64-regs.h    | 21 ---------------------
 3 files changed, 30 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-uniphier/clk/pll-ld11.c b/arch/arm/mach-uniphier/clk/pll-ld11.c
index b4a97d21610f..1a7ec2952524 100644
--- a/arch/arm/mach-uniphier/clk/pll-ld11.c
+++ b/arch/arm/mach-uniphier/clk/pll-ld11.c
@@ -11,6 +11,17 @@
 #include "../sc64-regs.h"
 #include "pll.h"
 
+/* PLL type: SSC */
+#define SC_CPLLCTRL	(SC_BASE_ADDR | 0x1400)	/* CPU/ARM */
+#define SC_SPLLCTRL	(SC_BASE_ADDR | 0x1410)	/* misc */
+#define SC_MPLLCTRL	(SC_BASE_ADDR | 0x1430)	/* DSP */
+#define SC_VSPLLCTRL	(SC_BASE_ADDR | 0x1440)	/* Video codec, VPE etc. */
+#define SC_DPLLCTRL	(SC_BASE_ADDR | 0x1460)	/* DDR memory */
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27FCTRL	(SC_BASE_ADDR | 0x1500)
+#define SC_VPLL27ACTRL	(SC_BASE_ADDR | 0x1520)
+
 void uniphier_ld11_pll_init(void)
 {
 	uniphier_ld20_sscpll_init(SC_CPLLCTRL, 1960, 1, 2);	/* 2000MHz -> 1960MHz */
diff --git a/arch/arm/mach-uniphier/clk/pll-ld20.c b/arch/arm/mach-uniphier/clk/pll-ld20.c
index 50b91598d64d..5e072c6dff77 100644
--- a/arch/arm/mach-uniphier/clk/pll-ld20.c
+++ b/arch/arm/mach-uniphier/clk/pll-ld20.c
@@ -11,6 +11,25 @@
 #include "../sc64-regs.h"
 #include "pll.h"
 
+/* PLL type: SSC */
+#define SC_CPLLCTRL	(SC_BASE_ADDR | 0x1400)	/* CPU/ARM */
+#define SC_SPLLCTRL	(SC_BASE_ADDR | 0x1410)	/* misc */
+#define SC_SPLL2CTRL	(SC_BASE_ADDR | 0x1420)	/* DSP */
+#define SC_MPLLCTRL	(SC_BASE_ADDR | 0x1430)	/* Video codec */
+#define SC_VPPLLCTRL	(SC_BASE_ADDR | 0x1440)	/* VPE etc. */
+#define SC_GPPLLCTRL	(SC_BASE_ADDR | 0x1450)	/* GPU/Mali */
+#define SC_DPLL0CTRL	(SC_BASE_ADDR | 0x1460)	/* DDR memory 0 */
+#define SC_DPLL1CTRL	(SC_BASE_ADDR | 0x1470)	/* DDR memory 1 */
+#define SC_DPLL2CTRL	(SC_BASE_ADDR | 0x1480)	/* DDR memory 2 */
+
+/* PLL type: VPLL27 */
+#define SC_VPLL27FCTRL	(SC_BASE_ADDR | 0x1500)
+#define SC_VPLL27ACTRL	(SC_BASE_ADDR | 0x1520)
+
+/* PLL type: DSPLL */
+#define SC_VPLL8KCTRL	(SC_BASE_ADDR | 0x1540)
+#define SC_A2PLLCTRL	(SC_BASE_ADDR | 0x15C0)
+
 void uniphier_ld20_pll_init(void)
 {
 	uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4);
diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h
index d3aa18530d97..d0a51f239c38 100644
--- a/arch/arm/mach-uniphier/sc64-regs.h
+++ b/arch/arm/mach-uniphier/sc64-regs.h
@@ -12,27 +12,6 @@
 
 #define SC_BASE_ADDR		0x61840000
 
-/* PLL type: SSC */
-#define SC_CPLLCTRL	(SC_BASE_ADDR | 0x1400)	/* LD11/20: CPU/ARM */
-#define SC_SPLLCTRL	(SC_BASE_ADDR | 0x1410)	/* LD11/20: misc */
-#define SC_SPLL2CTRL	(SC_BASE_ADDR | 0x1420)	/* LD20: IPP */
-#define SC_MPLLCTRL	(SC_BASE_ADDR | 0x1430)	/* LD11/20: Video codec */
-#define SC_VSPLLCTRL	(SC_BASE_ADDR | 0x1440)	/* LD11 */
-#define SC_VPPLLCTRL	(SC_BASE_ADDR | 0x1440)	/* LD20: VPE etc. */
-#define SC_GPPLLCTRL	(SC_BASE_ADDR | 0x1450)	/* LD20: GPU/Mali */
-#define SC_DPLLCTRL	(SC_BASE_ADDR | 0x1460)	/* LD11: DDR memory */
-#define SC_DPLL0CTRL	(SC_BASE_ADDR | 0x1460)	/* LD20: DDR memory 0 */
-#define SC_DPLL1CTRL	(SC_BASE_ADDR | 0x1470)	/* LD20: DDR memory 1 */
-#define SC_DPLL2CTRL	(SC_BASE_ADDR | 0x1480)	/* LD20: DDR memory 2 */
-
-/* PLL type: VPLL27 */
-#define SC_VPLL27FCTRL	(SC_BASE_ADDR | 0x1500)
-#define SC_VPLL27ACTRL	(SC_BASE_ADDR | 0x1520)
-
-/* PLL type: DSPLL */
-#define SC_VPLL8KCTRL	(SC_BASE_ADDR | 0x1540)
-#define SC_A2PLLCTRL	(SC_BASE_ADDR | 0x15C0)
-
 #define SC_RSTCTRL		(SC_BASE_ADDR | 0x2000)
 #define SC_RSTCTRL3		(SC_BASE_ADDR | 0x2008)
 #define SC_RSTCTRL4		(SC_BASE_ADDR | 0x200c)
-- 
2.7.4