[U-Boot] [PATCH 13/13] x86: Support Intel Cherry Hill board
Simon Glass
sjg at chromium.org
Sat Aug 26 13:39:25 UTC 2017
On 15 August 2017 at 23:42, Bin Meng <bmeng.cn at gmail.com> wrote:
> This adds support to Intel Cherry Hill board, a board based on
> Intel Braswell SoC. The following devices are validated:
>
> - serial port as the serial console
> - on-board Realtek 8169 ethernet controller
> - SATA AHCI controller
> - EMMC/SDHC controller
> - USB 3.0 xHCI controller
> - PCIe x1 slot with a graphics card
> - ICH SPI controller with an 8MB Macronix SPI flash
> - Integrated graphics device as the video console
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>
> ---
>
> arch/x86/dts/Makefile | 1 +
> arch/x86/dts/cherryhill.dts | 215 +++++++++++++
> board/intel/Kconfig | 10 +
> board/intel/cherryhill/Kconfig | 25 ++
> board/intel/cherryhill/MAINTAINERS | 6 +
> board/intel/cherryhill/Makefile | 7 +
> board/intel/cherryhill/cherryhill.c | 596 ++++++++++++++++++++++++++++++++++++
> board/intel/cherryhill/start.S | 9 +
> configs/cherryhill_defconfig | 36 +++
> doc/README.x86 | 30 ++
> include/configs/cherryhill.h | 22 ++
> 11 files changed, 957 insertions(+)
> create mode 100644 arch/x86/dts/cherryhill.dts
> create mode 100644 board/intel/cherryhill/Kconfig
> create mode 100644 board/intel/cherryhill/MAINTAINERS
> create mode 100644 board/intel/cherryhill/Makefile
> create mode 100644 board/intel/cherryhill/cherryhill.c
> create mode 100644 board/intel/cherryhill/start.S
> create mode 100644 configs/cherryhill_defconfig
> create mode 100644 include/configs/cherryhill.h
Reviewed-by: Simon Glass <sjg at chromium.org>
More information about the U-Boot
mailing list