[U-Boot] [PATCH v4 6/8] armv7: Add workaround for USB erratum A-009798
Ran Wang
ran.wang_1 at nxp.com
Mon Aug 28 09:15:31 UTC 2017
The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receive
Compliance test failure for a 100mV threshold.
Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE
to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test.
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta at nxp.com>
Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
---
Change in v4:
Update commit message about register setting.
Clean up the math in register setting.
Redefine SQRXTUNE to make code clearer.
Change in v3:
- none
Change in v2:
In function erratum_a009798():
1.Put a blank line after variable declaration.
arch/arm/cpu/armv7/ls102xa/Kconfig | 8 +++++++-
arch/arm/cpu/armv7/ls102xa/soc.c | 11 +++++++++++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 1 +
3 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 599cc28249..f09766cf03 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -6,6 +6,7 @@ config ARCH_LS1021A
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A009008
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR_BE if SYS_FSL_DDR
@@ -56,7 +57,12 @@ config SYS_FSL_ERRATUM_A010315
config SYS_FSL_ERRATUM_A009008
bool
help
- Workaround for USB erratum A009008
+ Workaround for USB PHY erratum A009008
+
+config SYS_FSL_ERRATUM_A009798
+ bool
+ help
+ Workaround for USB PHY erratum A009798
config SYS_FSL_SRDS_1
bool
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index 0cdc625380..487b5cf0ec 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -72,6 +72,16 @@ static void erratum_a009008(void)
#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
}
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+ u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+ u32 val = in_be32(scfg + SCFG_USB3PRM1CR / 4);
+
+ val &= ~(SCFG_USB_SQRXTUNE_MASK << 23);
+ out_be32(scfg + SCFG_USB3PRM1CR / 4, val);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
void s_init(void)
{
@@ -161,6 +171,7 @@ int arch_soc_init(void)
/* Erratum */
erratum_a009008();
+ erratum_a009798();
return 0;
}
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index ba59f40382..5762d3308a 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -176,6 +176,7 @@ struct ccsr_gur {
#define SCFG_BASE 0x01570000
#define SCFG_USB3PRM1CR 0x070
#define SCFG_USB_TXVREFTUNE 0x9
+#define SCFG_USB_SQRXTUNE_MASK 0x7
/* Supplemental Configuration Unit */
struct ccsr_scfg {
--
2.14.1
More information about the U-Boot
mailing list