[U-Boot] [PATCH] sunxi: bpi-m3: Enable eMMC

[Jagan Teki]

On Mon, Aug 28, 2017 at 2:33 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Add CONFIG_MMC_SUNXI_SLOT_EXTRA=2 to use eMMC on
> BPI_M3 board.
>
> Cc: Chen-Yu Tsai <wens at csie.org>
> Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Tested-by: Jagan Teki <jagan at amarulasolutions.com>

Since for eMMC fixes to test on A83T in Mainline, this patch need to
enable eMMC on BPI-M3.

So,
Applied to u-boot-sunxi/master because

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.