[U-Boot] [PATCH 15/19] arm: socfpga: Add support to memory allocation in SPL
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Tue Aug 29 10:45:57 UTC 2017
From: Tien Fong Chee <tien.fong.chee at intel.com>
Add support to memory allocation in SPL for preparation to enable FAT
in SPL. Memory allocation is needed by FAT to work properly.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
include/configs/socfpga_common.h | 23 ++++++++++++++++++++++-
1 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 05b03bd..0f53888 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -292,17 +292,34 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
/*
* SPL
*
- * SRAM Memory layout:
+ * SRAM Memory layout for gen 5:
*
* 0xFFFF_0000 ...... Start of SRAM
* 0xFFFF_xxxx ...... Top of stack (grows down)
* 0xFFFF_yyyy ...... Malloc area
* 0xFFFF_zzzz ...... Global Data
* 0xFFFF_FF00 ...... End of SRAM
+ *
+ * SRAM Memory layout for Arria 10:
+ * 0xFFE0_0000 ...... Start of SRAM (bottom)
+ * 0xFFEx_xxxx ...... Top of stack (grows down to bottom)
+ * 0xFFEy_yyyy ...... Malloc area (grows up to top)
+ * 0xFFEz_zzzz ...... Global Data
+ * 0xFFE3_FFFF ...... End of SRAM (top)
*/
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+/* SPL memory allocation configuration, it is required by FAT feature */
+#ifndef CONFIG_SYS_SPL_MALLOC_START
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00002000
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE - \
+ CONFIG_SYS_SPL_MALLOC_SIZE + \
+ CONFIG_SYS_INIT_RAM_ADDR)
+#endif
+#endif
/* SPL SDMMC boot support */
#ifdef CONFIG_SPL_MMC_SUPPORT
@@ -332,7 +349,11 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
/*
* Stack setup
*/
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START - 1)
+#endif
/* Extra Environment */
#ifndef CONFIG_SPL_BUILD
--
1.7.7.4
More information about the U-Boot
mailing list