[U-Boot] [PATCH 04/19] arm: socfpga: Add FPGA loadfs command support

[Chee, Tien Fong]

On Sel, 2017-08-29 at 13:57 +0200, Marek Vasut wrote:
> On 08/29/2017 12:45 PM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > 
> > This patch enables FPGA loadfs command support to U-boot console.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> But you enabled support for this in patch 1/19 ... ordering issue ?
> Patch changelog doesn't match what the patch does ...
> 
This patch is adding the FPGA loadfs command support for Arria 10.
I enabled FPGA loadfs in patch 1/19, so i can compile the changes in
this patch immediately.

So, you want me to improve the commit message and reordering?
> > 
> > ---
> >  cmd/fpga.c            |    2 +-
> >  drivers/fpga/altera.c |   38 ++++++++++++++++++++++++++++++-------
> > -
> >  drivers/fpga/fpga.c   |    8 ++++++++
> >  include/fpga.h        |    2 ++
> >  4 files changed, 41 insertions(+), 9 deletions(-)
> > 
> > diff --git a/cmd/fpga.c b/cmd/fpga.c
> > index 016349f..28e6628 100644
> > --- a/cmd/fpga.c
> > +++ b/cmd/fpga.c
> > @@ -363,7 +363,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga,
> >  	   "(Xilinx only)\n"
> >  #endif
> >  #if defined(CONFIG_CMD_FPGA_LOADFS)
> > -	   "Load device from filesystem (FAT by default) (Xilinx
> > only)\n"
> > +	   "Load device from filesystem (FAT by default)\n"
> >  	   "  loadfs [dev] [address] [image size] [blocksize]
> > <interface>\n"
> >  	   "        [<dev[:part]>] <filename>\n"
> >  #endif
> > diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c
> > index 135a357..8b60bd5 100644
> > --- a/drivers/fpga/altera.c
> > +++ b/drivers/fpga/altera.c
> > @@ -23,25 +23,30 @@ static const struct altera_fpga {
> >  	enum altera_family	family;
> >  	const char		*name;
> >  	int			(*load)(Altera_desc *, const
> > void *, size_t);
> > +	int 			(*loadfs)(Altera_desc *, const
> > void *, size_t,
> > +						 fpga_fs_info *);
> >  	int			(*dump)(Altera_desc *, const
> > void *, size_t);
> >  	int			(*info)(Altera_desc *);
> >  } altera_fpga[] = {
> >  #if defined(CONFIG_FPGA_ACEX1K)
> > -	{ Altera_ACEX1K, "ACEX1K", ACEX1K_load, ACEX1K_dump,
> > ACEX1K_info },
> > -	{ Altera_CYC2,   "ACEX1K", ACEX1K_load, ACEX1K_dump,
> > ACEX1K_info },
> > +	{ Altera_ACEX1K, "ACEX1K", ACEX1K_load, NULL, ACEX1K_dump,
> > ACEX1K_info },
> > +	{ Altera_CYC2,   "ACEX1K", ACEX1K_load, NULL, ACEX1K_dump,
> > ACEX1K_info },
> >  #elif defined(CONFIG_FPGA_CYCLON2)
> > -	{ Altera_ACEX1K, "CycloneII", CYC2_load, CYC2_dump,
> > CYC2_info },
> > -	{ Altera_CYC2,   "CycloneII", CYC2_load, CYC2_dump,
> > CYC2_info },
> > +	{ Altera_ACEX1K, "CycloneII", CYC2_load, NULL, CYC2_dump,
> > CYC2_info },
> > +	{ Altera_CYC2,   "CycloneII", CYC2_load, NULL, CYC2_dump,
> > CYC2_info },
> >  #endif
> >  #if defined(CONFIG_FPGA_STRATIX_II)
> > -	{ Altera_StratixII, "StratixII", StratixII_load,
> > +	{ Altera_StratixII, "StratixII", StratixII_load, NULL,
> >  	  StratixII_dump, StratixII_info },
> >  #endif
> >  #if defined(CONFIG_FPGA_STRATIX_V)
> > -	{ Altera_StratixV, "StratixV", stratixv_load, NULL, NULL
> > },
> > +	{ Altera_StratixV, "StratixV", stratixv_load, NULL, NULL,
> > NULL },
> >  #endif
> > -#if defined(CONFIG_FPGA_SOCFPGA)
> > -	{ Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL },
> > +#if defined(CONFIG_FPGA_SOCFPGA) &&
> > !defined(CONFIG_CMD_FPGA_LOADFS)
> > +	{ Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL,
> > NULL },
> > +#endif
> > +#if defined(CONFIG_FPGA_SOCFPGA) &&
> > defined(CONFIG_CMD_FPGA_LOADFS)
> > +	{ Altera_SoCFPGA, "SoC FPGA", socfpga_load,
> > socfpga_loadfs, NULL, NULL },
> >  #endif
> >  };
> >  
> > @@ -174,3 +179,20 @@ int altera_info(Altera_desc *desc)
> >  
> >  	return FPGA_SUCCESS;
> >  }
> > +
> > +#if defined(CONFIG_CMD_FPGA_LOADFS)
> > +int altera_loadfs(Altera_desc *desc, const void *buf, size_t
> > bsize,
> > +		   fpga_fs_info *fpga_fsinfo)
> > +{
> > +	const struct altera_fpga *fpga = altera_desc_to_fpga(desc,
> > __func__);
> > +
> > +	if (!fpga)
> > +		return FPGA_FAIL;
> > +
> > +	debug_cond(FPGA_DEBUG, "%s: Launching the %s FS
> > Loader...\n",
> > +		   __func__, fpga->name);
> > +	if (fpga->loadfs)
> > +		return fpga->loadfs(desc, buf, bsize,
> > fpga_fsinfo);
> > +	return 0;
> > +}
> > +#endif
> > diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
> > index e0fb1b4..42e901e 100644
> > --- a/drivers/fpga/fpga.c
> > +++ b/drivers/fpga/fpga.c
> > @@ -198,6 +198,14 @@ int fpga_fsload(int devnum, const void *buf,
> > size_t size,
> >  			fpga_no_sup((char *)__func__, "Xilinx
> > devices");
> >  #endif
> >  			break;
> > +#if defined(CONFIG_FPGA_ALTERA)
> > +		case fpga_altera:
> > +			ret_val = altera_loadfs(desc->devdesc,
> > buf, size,
> > +						fpga_fsinfo);
> Why is this not a generic code ? Load stuff from FS and program it
> into
> the FPGA directly, should be pretty generic operation IMO.
> 
This is generic multiplexing code, calling generic function name
fpga_fsload will lead to repective FPGA driver.
> > 
> > +#else
> > +			fpga_no_sup((char *)__func__, "Altera
> > devices");
> > +#endif
> > +			break;
> >  		default:
> >  			printf("%s: Invalid or unsupported device
> > type %d\n",
> >  			       __func__, desc->devtype);
> > diff --git a/include/fpga.h b/include/fpga.h
> > index d768fb1..8920016 100644
> > --- a/include/fpga.h
> > +++ b/include/fpga.h
> > @@ -56,8 +56,10 @@ int fpga_count(void);
> >  const fpga_desc *const fpga_get_desc(int devnum);
> >  int fpga_load(int devnum, const void *buf, size_t bsize,
> >  	      bitstream_type bstype);
> > +#if defined(CONFIG_CMD_FPGA_LOADFS)
> >  int fpga_fsload(int devnum, const void *buf, size_t size,
> >  		fpga_fs_info *fpga_fsinfo);
> > +#endif
> >  int fpga_loadbitstream(int devnum, char *fpgadata, size_t size,
> >  		       bitstream_type bstype);
> >  int fpga_dump(int devnum, const void *buf, size_t bsize);
> > 
>