[U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function

[Chee, Tien Fong]

On Sel, 2017-08-29 at 13:59 +0200, Marek Vasut wrote:
> On 08/29/2017 12:45 PM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > 
> > Add function for both multiple DRAM bank and single DRAM bank size
> > initialization. This common functionality could be used by every
> > single
> > SOCFPGA board.
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > ---
> >  arch/arm/mach-socfpga/board.c    |   12 ++++++++++++
> >  include/configs/socfpga_common.h |    1 +
> >  2 files changed, 13 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-
> > socfpga/board.c
> > index a41d089..3f2e30a 100644
> > --- a/arch/arm/mach-socfpga/board.c
> > +++ b/arch/arm/mach-socfpga/board.c
> > @@ -29,6 +29,18 @@ int board_init(void)
> >  	return 0;
> >  }
> >  
> > +int dram_init_banksize(void)
> > +{
> > +#if !defined(CONFIG_SYS_SDRAM_BASE) &&
> > !defined(CONFIG_SYS_SDRAM_SIZE)
> > +	fdtdec_setup_memory_banksize();
> This should work on al boards, so why do you need this macro ?
> Also, this should go into arch/arm/ , not board/
> 
In case these macros are not defined, then we need to get the info from
DTS. This is in arch/arm/mach-socpfga/board.c . I found some in
arch/arm, and other in board/ .
> > 
> > +#else
> > +	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
> > +	gd->bd->bi_dram[0].size =  CONFIG_SYS_SDRAM_SIZE;
> > +#endif
> > +
> > +	return 0;
> > +}
> > +
> >  #ifdef CONFIG_USB_GADGET
> >  struct dwc2_plat_otg_data socfpga_otg_data = {
> >  	.usb_gusbcfg	= 0x1417,
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h
> > index c15d244..05b03bd 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -47,6 +47,7 @@
> >  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> >  
> >  #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
> > +#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_1_SIZE
> >  #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
> >  #define CONFIG_SYS_TEXT_BASE		0x08000040
> >  #else
> > 
>