[U-Boot] [PATCH 3/4] armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdboot
Shengzhou Liu
Shengzhou.Liu at nxp.com
Wed Aug 30 10:26:08 UTC 2017
Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
---
include/configs/ls1021atwr.h | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0e5b004868..45fb94a889 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -384,6 +384,8 @@
"ramdisk_addr_r=0xa0000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
BOOTENV \
"boot_scripts=ls1021atwr_boot.scr\0" \
"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
@@ -473,13 +475,20 @@
"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
"nor_bootcmd=echo Trying load from nor..;" \
"cp.b $kernel_addr $load_addr " \
- "$kernel_size && bootm $load_addr#$board\0"
+ "$kernel_size && bootm $load_addr#$board\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd; " \
+ "bootm $load_addr#$board\0"
#endif
#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run sd_bootcmd;"
#else
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run nor_bootcmd;"
--
2.14.1
More information about the U-Boot
mailing list