[U-Boot] [PATCH v3 2/2] armv8: fsl-lsch3: Add SD boot support for ls1088aqds
Ashish Kumar
Ashish.Kumar at nxp.com
Thu Aug 31 11:14:22 UTC 2017
Add support for SD boot for QDS for ls1088 paltform
Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra at nxp.com>
---
v3:
Depends upon
http://patchwork.ozlabs.org/patch/794217/
Rebase to top commit "8b3cec7 mtdparts: Fix uninitialized scalar usage"
Enable PPA
New memory map
arch/arm/Kconfig | 1 +
board/freescale/ls1088a/MAINTAINERS | 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 33 +++++++++++++++++++++++++++++++
include/configs/ls1088aqds.h | 34 ++++++++++++++++++++++++++++----
4 files changed, 65 insertions(+), 4 deletions(-)
create mode 100644 configs/ls1088aqds_sdcard_qspi_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6243710..8bce296 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -812,6 +812,7 @@ config TARGET_LS1088AQDS
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
+ select SUPPORT_SPL
help
Support for NXP LS1088AQDS platform
The LS1088A Development System (QDS) is a high-performance
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 68f23d6..b3d5c38 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -14,3 +14,4 @@ S: Maintained
F: board/freescale/ls1088a/
F: include/configs/ls1088aqds.h
F: configs/ls1088aqds_qspi_defconfig
+F: configs/ls1088aqds_sdcard_qspi_defconfig
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
new file mode 100644
index 0000000..95d8627
--- /dev/null
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -0,0 +1,33 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_BUILD=y
+CONFIG_PARTITIONS=y
+# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 3547b0b..72c2d3c 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -24,6 +24,11 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_SECT_SIZE 0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
@@ -31,10 +36,10 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_ENV_SIZE 0x20000
#endif
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH
-
+#define CONFIG_SYS_I2C_EARLY_INIT
#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
@@ -192,7 +197,7 @@ unsigned long get_board_ddr_clk(void);
| CSPR_V)
#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024)
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0)
#else
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12)
@@ -295,7 +300,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_QSPI
#define CONFIG_SPI_FLASH_SPANSION
#define FSL_QSPI_FLASH_SIZE (1 << 26)
@@ -318,7 +323,11 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
#define CONFIG_FSL_MEMAC
@@ -346,6 +355,23 @@ unsigned long get_board_ddr_clk(void);
"sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x90100000\0" \
+ "kernel_addr=0x800\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x8000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x14000\0" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000 \0"
#else /* NOR BOOT */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
--
2.7.4
More information about the U-Boot
mailing list