[U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK

[Diego Dorta]

Hi Peng,

2017-11-29 0:42 GMT-02:00 Peng Fan <van.freenix at gmail.com>:
> Hi Diego,
>
> On Tue, Nov 28, 2017 at 02:42:20PM -0200, Diego Dorta wrote:
>>Hi Peng Fan,
>>
>>2017-11-28 10:31 GMT-02:00 Peng Fan <peng.fan at nxp.com>:
>>> This patchset is to add i.MX8M and i.MX8MQ-EVK support
>>>
>>> patch: "power: pmic.h: include dm/ofnode.h" and
>>> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed
>>> in mailist to not merged. Pick it up.
>>>
>>> The board support is a large patch because of the ddr related code.
>>> If it is not good, please first review/pick-up other patches if they
>>> are ok.
>>>
>>
>>I applied your patches and I am facing the following errors:
>
> I missed to add this after I cleanup patches.
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index efa2056e09..5ad17cb7fb 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -135,3 +135,4 @@ obj-$(CONFIG_MX6) += mx6/
>  obj-$(CONFIG_MX7) += mx7/
>  obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
>
> +obj-$(CONFIG_MX8M) += mx8m/
>
> I'll add this in V2.
>
> Thanks,
> Peng.
>

I've followed the instructions for compiling and generating the
flash.bin file image.
However, when I try to boot I got this error and the U-Boot does not fully load:

�
U-Boot SPL 2017.11-38298-g2c1aa10-dirty (Nov 30 2017 - 10:49:38)
PMIC:  PFUZE100 ID=0x10
check ddr4_pmu_train_imem code
check ddr4_pmu_train_imem code pass
check ddr4_pmu_train_dmem code
check ddr4_pmu_train_dmem code pass
PLL bypass to 100MTS setting done
Training PASS
PLL bypass to 400MTS setting done
Training PASS
Training PASS
check ddr4_pmu_train_imem code
check ddr4_pmu_train_imem code pass
check ddr4_pmu_train_dmem code
check ddr4_pmu_train_dmem code pass

Have you ever faced this error or am I doing something wrong?

Thanks,
Diego