[U-Boot] [PATCH V2 02/23] imx: mx8m: add register definition header file
Peng Fan
peng.fan at nxp.com
Mon Dec 4 04:31:15 UTC 2017
Add register definition header file for i.MX8M
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/include/asm/arch-mx8m/imx-regs.h | 318 ++++++++++++++++++++++++++++++
1 file changed, 318 insertions(+)
create mode 100644 arch/arm/include/asm/arch-mx8m/imx-regs.h
diff --git a/arch/arm/include/asm/arch-mx8m/imx-regs.h b/arch/arm/include/asm/arch-mx8m/imx-regs.h
new file mode 100644
index 0000000000..2fb392d08e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx8m/imx-regs.h
@@ -0,0 +1,318 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MX8M_REGS_H__
+#define __ASM_ARCH_MX8M_REGS_H__
+
+#include <asm/mach-imx/regs-lcdif.h>
+
+#define M4_BOOTROM_BASE_ADDR 0x007E0000
+
+#define SAI1_BASE_ADDR 0x30010000
+#define SAI6_BASE_ADDR 0x30030000
+#define SAI5_BASE_ADDR 0x30040000
+#define SAI4_BASE_ADDR 0x30050000
+#define SPBA2_BASE_ADDR 0x300F0000
+#define AIPS1_BASE_ADDR 0x301F0000
+#define GPIO1_BASE_ADDR 0X30200000
+#define GPIO2_BASE_ADDR 0x30210000
+#define GPIO3_BASE_ADDR 0x30220000
+#define GPIO4_BASE_ADDR 0x30230000
+#define GPIO5_BASE_ADDR 0x30240000
+#define ANA_TSENSOR_BASE_ADDR 0x30260000
+#define ANA_OSC_BASE_ADDR 0x30270000
+#define WDOG1_BASE_ADDR 0x30280000
+#define WDOG2_BASE_ADDR 0x30290000
+#define WDOG3_BASE_ADDR 0x302A0000
+#define SDMA2_BASE_ADDR 0x302C0000
+#define GPT1_BASE_ADDR 0x302D0000
+#define GPT2_BASE_ADDR 0x302E0000
+#define GPT3_BASE_ADDR 0x302F0000
+#define ROMCP_BASE_ADDR 0x30310000
+#define LCDIF_BASE_ADDR 0x30320000
+#define IOMUXC_BASE_ADDR 0x30330000
+#define IOMUXC_GPR_BASE_ADDR 0x30340000
+#define OCOTP_BASE_ADDR 0x30350000
+#define ANA_PLL_BASE_ADDR 0x30360000
+#define SNVS_HP_BASE_ADDR 0x30370000
+#define CCM_BASE_ADDR 0x30380000
+#define SRC_BASE_ADDR 0x30390000
+#define GPC_BASE_ADDR 0x303A0000
+#define SEMAPHORE1_BASE_ADDR 0x303B0000
+#define SEMAPHORE2_BASE_ADDR 0x303C0000
+#define RDC_BASE_ADDR 0x303D0000
+#define CSU_BASE_ADDR 0x303E0000
+
+#define AIPS2_BASE_ADDR 0x305F0000
+#define PWM1_BASE_ADDR 0x30660000
+#define PWM2_BASE_ADDR 0x30670000
+#define PWM3_BASE_ADDR 0x30680000
+#define PWM4_BASE_ADDR 0x30690000
+#define SYSCNT_RD_BASE_ADDR 0x306A0000
+#define SYSCNT_CMP_BASE_ADDR 0x306B0000
+#define SYSCNT_CTRL_BASE_ADDR 0x306C0000
+#define GPT6_BASE_ADDR 0x306E0000
+#define GPT5_BASE_ADDR 0x306F0000
+#define GPT4_BASE_ADDR 0x30700000
+#define PERFMON1_BASE_ADDR 0x307C0000
+#define PERFMON2_BASE_ADDR 0x307D0000
+#define QOSC_BASE_ADDR 0x307F0000
+
+#define SPDIF1_BASE_ADDR 0x30810000
+#define ECSPI1_BASE_ADDR 0x30820000
+#define ECSPI2_BASE_ADDR 0x30830000
+#define ECSPI3_BASE_ADDR 0x30840000
+#define UART1_BASE_ADDR 0x30860000
+#define UART3_BASE_ADDR 0x30880000
+#define UART2_BASE_ADDR 0x30890000
+#define SPDIF2_BASE_ADDR 0x308A0000
+#define SAI2_BASE_ADDR 0x308B0000
+#define SAI3_BASE_ADDR 0x308C0000
+#define SPBA1_BASE_ADDR 0x308F0000
+#define CAAM_BASE_ADDR 0x30900000
+#define AIPS3_BASE_ADDR 0x309F0000
+#define MIPI_PHY_BASE_ADDR 0x30A00000
+#define MIPI_DSI_BASE_ADDR 0x30A10000
+#define I2C1_BASE_ADDR 0x30A20000
+#define I2C2_BASE_ADDR 0x30A30000
+#define I2C3_BASE_ADDR 0x30A40000
+#define I2C4_BASE_ADDR 0x30A50000
+#define UART4_BASE_ADDR 0x30A60000
+#define MIPI_CSI_BASE_ADDR 0x30A70000
+#define MIPI_CSI_PHY1_BASE_ADDR 0x30A80000
+#define CSI1_BASE_ADDR 0x30A90000
+#define MU_A_BASE_ADDR 0x30AA0000
+#define MU_B_BASE_ADDR 0x30AB0000
+#define SEMAPHOR_HS_BASE_ADDR 0x30AC0000
+#define USDHC1_BASE_ADDR 0x30B40000
+#define USDHC2_BASE_ADDR 0x30B50000
+#define MIPI_CS2_BASE_ADDR 0x30B60000
+#define MIPI_CSI_PHY2_BASE_ADDR 0x30B70000
+#define CSI2_BASE_ADDR 0x30B80000
+#define QSPI0_BASE_ADDR 0x30BB0000
+#define QSPI0_AMBA_BASE 0x08000000
+#define SDMA1_BASE_ADDR 0x30BD0000
+#define ENET1_BASE_ADDR 0x30BE0000
+
+#define HDMI_CTRL_BASE_ADDR 0x32C00000
+#define AIPS4_BASE_ADDR 0x32DF0000
+#define DC1_BASE_ADDR 0x32E00000
+#define DC2_BASE_ADDR 0x32E10000
+#define DC3_BASE_ADDR 0x32E20000
+#define HDMI_SEC_BASE_ADDR 0x32E40000
+#define TZASC_BASE_ADDR 0x32F80000
+#define MTR_BASE_ADDR 0x32FB0000
+#define PLATFORM_CTRL_BASE_ADDR 0x32FE0000
+
+#define MXS_APBH_BASE 0x33000000
+#define MXS_GPMI_BASE 0x33002000
+#define MXS_BCH_BASE 0x33004000
+
+#define USB1_BASE_ADDR 0x38100000
+#define USB2_BASE_ADDR 0x38200000
+#define USB1_PHY_BASE_ADDR 0x381F0000
+#define USB2_PHY_BASE_ADDR 0x382F0000
+
+#define MXS_LCDIF_BASE LCDIF_BASE_ADDR
+
+#define SRC_IPS_BASE_ADDR 0x30390000
+#define SRC_DDRC_RCR_ADDR 0x30391000
+#define SRC_DDRC2_RCR_ADDR 0x30391004
+
+#define DDRC_DDR_SS_GPR0 0x3d000000
+#define DDRC_IPS_BASE_ADDR(X) (0x3d400000 + ((X) * 0x2000000))
+#define DDR_CSD1_BASE_ADDR 0x40000000
+
+#if !defined(__ASSEMBLY__)
+#include <asm/types.h>
+#include <linux/bitops.h>
+#include <stdbool.h>
+
+#define GPR_TZASC_EN BIT(0)
+#define GPR_TZASC_EN_LOCK BIT(16)
+
+#define SRC_SCR_M4_ENABLE_OFFSET 3
+#define SRC_SCR_M4_ENABLE_MASK BIT(3)
+#define SRC_SCR_M4C_NON_SCLR_RST_OFFSET 0
+#define SRC_SCR_M4C_NON_SCLR_RST_MASK BIT(0)
+#define SRC_DDR1_ENABLE_MASK 0x8F000000UL
+#define SRC_DDR2_ENABLE_MASK 0x8F000000UL
+
+struct iomuxc_gpr_base_regs {
+ u32 gpr[47];
+};
+
+struct ocotp_regs {
+ u32 ctrl;
+ u32 ctrl_set;
+ u32 ctrl_clr;
+ u32 ctrl_tog;
+ u32 timing;
+ u32 rsvd0[3];
+ u32 data;
+ u32 rsvd1[3];
+ u32 read_ctrl;
+ u32 rsvd2[3];
+ u32 read_fuse_data;
+ u32 rsvd3[3];
+ u32 sw_sticky;
+ u32 rsvd4[3];
+ u32 scs;
+ u32 scs_set;
+ u32 scs_clr;
+ u32 scs_tog;
+ u32 crc_addr;
+ u32 rsvd5[3];
+ u32 crc_value;
+ u32 rsvd6[3];
+ u32 version;
+ u32 rsvd7[0xdb];
+
+ /* fuse banks */
+ struct fuse_bank {
+ u32 fuse_regs[0x10];
+ } bank[0];
+};
+
+struct fuse_bank0_regs {
+ u32 lock;
+ u32 rsvd0[3];
+ u32 uid_low;
+ u32 rsvd1[3];
+ u32 uid_high;
+ u32 rsvd2[7];
+};
+
+struct fuse_bank1_regs {
+ u32 tester3;
+ u32 rsvd0[3];
+ u32 tester4;
+ u32 rsvd1[3];
+ u32 tester5;
+ u32 rsvd2[3];
+ u32 cfg0;
+ u32 rsvd3[3];
+};
+
+struct anamix_pll {
+ u32 audio_pll1_cfg0;
+ u32 audio_pll1_cfg1;
+ u32 audio_pll2_cfg0;
+ u32 audio_pll2_cfg1;
+ u32 video_pll_cfg0;
+ u32 video_pll_cfg1;
+ u32 gpu_pll_cfg0;
+ u32 gpu_pll_cfg1;
+ u32 vpu_pll_cfg0;
+ u32 vpu_pll_cfg1;
+ u32 arm_pll_cfg0;
+ u32 arm_pll_cfg1;
+ u32 sys_pll1_cfg0;
+ u32 sys_pll1_cfg1;
+ u32 sys_pll1_cfg2;
+ u32 sys_pll2_cfg0;
+ u32 sys_pll2_cfg1;
+ u32 sys_pll2_cfg2;
+ u32 sys_pll3_cfg0;
+ u32 sys_pll3_cfg1;
+ u32 sys_pll3_cfg2;
+ u32 video_pll2_cfg0;
+ u32 video_pll2_cfg1;
+ u32 video_pll2_cfg2;
+ u32 dram_pll_cfg0;
+ u32 dram_pll_cfg1;
+ u32 dram_pll_cfg2;
+ u32 digprog;
+ u32 osc_misc_cfg;
+ u32 pllout_monitor_cfg;
+ u32 frac_pllout_div_cfg;
+ u32 sscg_pllout_div_cfg;
+};
+
+struct fuse_bank9_regs {
+ u32 mac_addr0;
+ u32 rsvd0[3];
+ u32 mac_addr1;
+ u32 rsvd1[11];
+};
+
+/* System Reset Controller (SRC) */
+struct src {
+ u32 scr;
+ u32 a53rcr;
+ u32 a53rcr1;
+ u32 m4rcr;
+ u32 reserved1[4];
+ u32 usbophy1_rcr;
+ u32 usbophy2_rcr;
+ u32 mipiphy_rcr;
+ u32 pciephy_rcr;
+ u32 hdmi_rcr;
+ u32 disp_rcr;
+ u32 reserved2[2];
+ u32 gpu_rcr;
+ u32 vpu_rcr;
+ u32 pcie2_rcr;
+ u32 mipiphy1_rcr;
+ u32 mipiphy2_rcr;
+ u32 reserved3;
+ u32 sbmr1;
+ u32 srsr;
+ u32 reserved4[2];
+ u32 sisr;
+ u32 simr;
+ u32 sbmr2;
+ u32 gpr1;
+ u32 gpr2;
+ u32 gpr3;
+ u32 gpr4;
+ u32 gpr5;
+ u32 gpr6;
+ u32 gpr7;
+ u32 gpr8;
+ u32 gpr9;
+ u32 gpr10;
+ u32 reserved5[985];
+ u32 ddr1_rcr;
+ u32 ddr2_rcr;
+};
+
+#define WDOG_WDT_MASK BIT(3)
+#define WDOG_WDZST_MASK BIT(0)
+struct wdog_regs {
+ u16 wcr; /* Control */
+ u16 wsr; /* Service */
+ u16 wrsr; /* Reset Status */
+ u16 wicr; /* Interrupt Control */
+ u16 wmcr; /* Miscellaneous Control */
+};
+
+/* Boot device type */
+#define BOOT_TYPE_SD 0x1
+#define BOOT_TYPE_MMC 0x2
+#define BOOT_TYPE_NAND 0x3
+#define BOOT_TYPE_QSPI 0x4
+#define BOOT_TYPE_WEIM 0x5
+#define BOOT_TYPE_SPINOR 0x6
+#define BOOT_TYPE_USB 0xF
+
+#define ROM_SW_INFO_ADDR 0x00000968
+#define ROM_SW_INFO_ADDR_A0 0x000009e8
+
+struct bootrom_sw_info {
+ u8 reserved_1;
+ u8 boot_dev_instance;
+ u8 boot_dev_type;
+ u8 reserved_2;
+ u32 core_freq;
+ u32 axi_freq;
+ u32 ddr_freq;
+ u32 tick_freq;
+ u32 reserved_3[3];
+};
+
+#endif
+#endif
--
2.14.1
More information about the U-Boot
mailing list