[U-Boot] [PATCH] armv8: layerscape: refine port register configuration

[Yuantian Tang]

These PP2C and PP3C registers control the configuration of the PHY
control OOB timing for the COMINIT/COMWAKE parameters respectively
for sata port. Overwrite default values with calculated ones to get
better OOB timing.

Signed-off-by: Tang Yuantian <andy.tang at nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/soc.c        | 6 ++++++
 arch/arm/include/asm/arch-fsl-layerscape/soc.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 497a4b541d..b52653929c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -328,6 +328,8 @@ int sata_init(void)
 #ifdef CONFIG_SYS_SATA2
 	ccsr_ahci  = (void *)CONFIG_SYS_SATA2;
 	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
 	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
 	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
 #endif
@@ -335,6 +337,8 @@ int sata_init(void)
 #ifdef CONFIG_SYS_SATA1
 	ccsr_ahci  = (void *)CONFIG_SYS_SATA1;
 	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
 	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
 	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
 
@@ -355,6 +359,8 @@ int sata_init(void)
 	/* Disable SATA ECC */
 	out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
 	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
 	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
 	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 247f09e0f5..664d847e9c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -88,6 +88,8 @@ struct cpu_type {
 
 /* ahci port register default value */
 #define AHCI_PORT_PHY_1_CFG    0xa003fffe
+#define AHCI_PORT_PHY2_CFG	0x28184d1f
+#define AHCI_PORT_PHY3_CFG	0x0e081509
 #define AHCI_PORT_TRANS_CFG    0x08000029
 #define AHCI_PORT_AXICC_CFG	0x3fffffff
 
-- 
2.14.1