[U-Boot] [PATCH v5 07/20] common: Generic firmware loader for file system
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Tue Dec 5 07:57:57 UTC 2017
From: Tien Fong Chee <tien.fong.chee at intel.com>
This is file system generic loader which can be used to load
the file image from the storage into target such as memory.
The consumer driver would then use this loader to program whatever,
ie. the FPGA device.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
common/Makefile | 1 +
common/fs_loader.c | 304 ++++++++++++++++++++++++++++++++++++++++++++++++++++
include/fs_loader.h | 30 ++++++
3 files changed, 335 insertions(+)
create mode 100644 common/fs_loader.c
create mode 100644 include/fs_loader.h
diff --git a/common/Makefile b/common/Makefile
index 801ea31..419e915 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -130,3 +130,4 @@ obj-$(CONFIG_CMD_DFU) += dfu.o
obj-y += command.o
obj-y += s_record.o
obj-y += xyzModem.o
+obj-y += fs_loader.o
diff --git a/common/fs_loader.c b/common/fs_loader.c
new file mode 100644
index 0000000..04f682b
--- /dev/null
+++ b/common/fs_loader.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fs.h>
+#include <fs_loader.h>
+#include <nand.h>
+#include <sata.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <spl.h>
+#include <linux/string.h>
+#include <usb.h>
+
+static struct device_location default_locations[] = {
+ {
+ .name = "mmc",
+ .devpart = "0:1",
+ },
+ {
+ .name = "usb",
+ .devpart = "0:1",
+ },
+ {
+ .name = "sata",
+ .devpart = "0:1",
+ },
+};
+
+/* USB build is not supported yet in SPL */
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_USB_STORAGE
+static int init_usb(void)
+{
+ int err = 0;
+
+ err = usb_init();
+
+ if (err)
+ return err;
+
+#ifndef CONFIG_DM_USB
+ err = usb_stor_scan(1) < 0 ? -ENODEV : 0;
+#endif
+
+ return err;
+}
+#else
+static int init_usb(void)
+{
+ printf("Error: Cannot load flash image: no USB support\n");
+ return -ENOSYS;
+}
+#endif
+#endif
+
+#ifdef CONFIG_SATA
+static int init_storage_sata(void)
+{
+ return sata_probe(0);
+}
+#else
+static int init_storage_sata(void)
+{
+ printf("Error: Cannot load image: no SATA support\n");
+ return -ENOSYS;
+}
+#endif
+
+#ifdef CONFIG_CMD_UBIFS
+static int mount_ubifs(struct device_location *location)
+{
+ int ret = 0;
+ char cmd[32];
+
+ sprintf(cmd, "ubi part %s", location->mtdpart);
+
+ ret = run_command(cmd, 0);
+
+ if (ret)
+ return ret;
+
+ sprintf(cmd, "ubifsmount %s", location->ubivol);
+
+ ret = run_command(cmd, 0);
+
+ return res;
+}
+
+static int umount_ubifs(void)
+{
+ return run_command("ubifsumount", 0);
+}
+#else
+static int mount_ubifs(struct device_location *location)
+{
+ printf("Error: Cannot load image: no UBIFS support\n");
+ return -ENOSYS;
+}
+
+static int umount_ubifs(void)
+{
+ printf("Error: Cannot unmount UBIFS: no UBIFS support\n");
+ return -ENOSYS;
+}
+#endif
+
+#if defined(CONFIG_SPL_MMC_SUPPORT) && defined(CONFIG_SPL_BUILD)
+static int init_mmc(void)
+{
+ /* Just for the case MMC is not yet initialized */
+ struct mmc *mmc = NULL;
+ int err = 0;
+
+ spl_mmc_find_device(&mmc, spl_boot_device());
+
+ err = mmc_init(mmc);
+
+ if (err) {
+ printf("spl: mmc init failed with error: %d\n", err);
+ return err;
+ }
+
+ return err;
+}
+#else
+static int init_mmc(void)
+{
+ /* Expect somewhere already initialize MMC */
+ return 0;
+}
+#endif
+
+static int select_fs_dev(struct device_location *location)
+{
+ int ret = 0;
+
+ if (!strcmp("mmc", location->name))
+ ret = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY);
+ else if (!strcmp("usb", location->name))
+ ret = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY);
+ else if (!strcmp("sata", location->name))
+ ret = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY);
+ else if (!strcmp("ubi", location->name))
+ if (location->ubivol != NULL)
+ ret = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS);
+ else
+ ret = -ENODEV;
+ else {
+ printf("Error: unsupported location storage.\n");
+ return -ENODEV;
+ }
+
+ if (ret)
+ printf("Error: could not access storage.\n");
+
+ return ret;
+}
+
+static int init_storage_device(struct device_location *location)
+{
+ int ret = 0;
+#ifndef CONFIG_SPL_BUILD
+ /* USB build is not supported yet in SPL */
+ if (!strcmp("usb", location->name))
+ ret = init_usb();
+#endif
+
+ if (!strcmp("mmc", location->name))
+ ret = init_mmc();
+
+ if (!strcmp("sata", location->name))
+ ret = init_storage_sata();
+
+ if (location->ubivol != NULL)
+ ret = mount_ubifs(location);
+
+ return ret;
+}
+
+static void set_storage_devpart(char *name, char *devpart)
+{
+ int i;
+ u32 size;
+
+ size = ARRAY_SIZE(default_locations);
+
+ for (i = 0; i < size; i++) {
+ if (!strcmp(default_locations[i].name, name))
+ default_locations[i].devpart = devpart;
+ }
+
+ return;
+}
+
+/*
+ * Prepare firmware struct;
+ * return -ve if fail.
+ */
+static int _request_firmware_prepare(struct firmware **firmware_p,
+ const char *name, void *dbuf,
+ size_t size, u32 offset)
+{
+ struct firmware *firmware = NULL;
+ int ret = 0;
+
+ if (!name || name[0] == '\0')
+ ret = -EINVAL;
+
+ *firmware_p = firmware = calloc(1, sizeof(*firmware));
+
+ if (!firmware) {
+ printf("%s: calloc(struct firmware) failed\n", __func__);
+ return -ENOMEM;
+ }
+
+ firmware->name = name;
+ firmware->data = dbuf;
+ firmware->size = size;
+ firmware->offset = offset;
+
+ return ret;
+}
+
+/*
+ * fw_get_filesystem_firmware - load firmware into a allocated buffer
+ * @firmware_p: pointer to firmware image
+ * @location: An array of supported firmware location
+ *
+ * @return: size of total read
+ * -ve when error
+ */
+static int fw_get_filesystem_firmware(struct device_location *location,
+ struct firmware *firmware_p)
+{
+ loff_t actread;
+ char *dev_part;
+ int ret = 0;
+
+ dev_part = env_get("FW_DEV_PART");
+
+ if (dev_part)
+ set_storage_devpart(location->name, dev_part);
+
+ ret = init_storage_device(location);
+
+ if (ret)
+ goto out;
+
+ select_fs_dev(location);
+
+ ret = fs_read(firmware_p->name, (u32)firmware_p->data,
+ firmware_p->offset, firmware_p->size, &actread);
+
+ if (ret || (actread != firmware_p->size)) {
+ printf("Error: %d Failed to read %s from flash %lld ",
+ ret,
+ firmware_p->name,
+ actread);
+ printf("!= %d.\n", firmware_p->size);
+ return -EPERM;
+ } else
+ ret = actread;
+
+out:
+ if (location->ubivol != NULL)
+ umount_ubifs();
+
+ return ret;
+}
+/*
+ * request_firmware_into_buf - load firmware into a previously allocated buffer
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @buf: address of buffer to load firmware into
+ * @size: size of buffer
+ * @offset: offset of a file for start reading
+ *
+ * This firmware is loaded directly into the buffer pointed to by @buf and
+ * the @firmware_p data member is pointed at @buf.
+ *
+ * @return: size of total read
+ * -ve when error
+ */
+int request_firmware_into_buf(struct firmware **firmware_p,
+ const char *name,
+ struct device_location *location,
+ void *buf, size_t size, u32 offset)
+{
+ int ret = 0;
+
+ ret = _request_firmware_prepare(firmware_p, name, buf, size, offset);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ ret = fw_get_filesystem_firmware(location, *firmware_p);
+
+ return ret;
+}
diff --git a/include/fs_loader.h b/include/fs_loader.h
new file mode 100644
index 0000000..dacc1f3
--- /dev/null
+++ b/include/fs_loader.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#ifndef _FS_LOADER_H_
+#define _FS_LOADER_H_
+
+#include <linux/types.h>
+
+struct firmware {
+ size_t size; /* Size of a file */
+ const u8 *data; /* Buffer for file */
+ const char *name; /* Filename */
+ u32 offset; /* Offset of reading a file */
+ void *priv; /* Firmware loader private fields */
+};
+
+struct device_location {
+ char *name; /* Such as mmc, usb,and sata. */
+ char *devpart; /* Use the load command dev:part conventions */
+ char *mtdpart; /* MTD partition for ubi part */
+ char *ubivol; /* UBI volume-name for ubifsmount */
+};
+
+int request_firmware_into_buf(struct firmware **firmware_p,
+ const char *name,
+ struct device_location *location,
+ void *buf, size_t size, u32 offset);
+#endif
--
2.2.0
More information about the U-Boot
mailing list