[U-Boot] [PATCH v2 0/5] sunxi: Enable EMAC on various boards

[Chen-Yu Tsai]

Hi,

On Sat, Nov 25, 2017 at 1:08 PM, Chen-Yu Tsai <wens at csie.org> wrote:
> Hi,
>
> This series enables the EMAC for some A83T and A64 boards.
>
> Changes since v1:
>
>   - Added "bitfield: Include linux/bitops.h for ffs()" to fix build
>     errors
>   - Use bitfield_replace_by_mask() instead of open coding bitfield ops
>   - Trimmed used pins in the device tree to only those actually needed
>   - Enabled Realtek PHY driver
>   - Added "sunxi: Enable EMAC on the Bananapi M64"
>
> ChenYu
>
>
> Chen-Yu Tsai (5):
>   bitfield: Include linux/bitops.h for ffs()
>   net: sun8i_emac: Support RX/TX delay chains
>   sunxi: Enable EMAC on the Cubietruck Plus
>   sunxi: Enable EMAC on the Bananapi M3
>   sunxi: Enable EMAC on the Bananapi M64

Any comments (particularly two the first two patches) on this series?
Joe?

ChenYu

>
>  arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi   | 39 +++++++++++++++++++++
>  arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi    | 40 ++++++++++++++++++++++
>  .../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38 ++++++++++++++++++++
>  configs/Cubietruck_plus_defconfig                  |  2 ++
>  configs/Sinovoip_BPI_M3_defconfig                  |  2 ++
>  drivers/net/sun8i_emac.c                           | 22 ++++++++++++
>  include/bitfield.h                                 |  1 +
>  7 files changed, 144 insertions(+)
>  create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi
>  create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi
>  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
>
> --
> 2.15.0
>