[U-Boot] [PATCH 4/9] board: freescale: ls1012a: enable network support on ls1012a platforms

[Joe Hershberger]

On Mon, Oct 9, 2017 at 4:11 AM, Calvin Johnson <calvin.johnson at nxp.com> wrote:
> Ethernet support on all three LS1012A platforms(FRDM, QDS and RDB) is
> enabled with this patch.
>
> eth.c files for all 3 platforms contain board ethernet initialization
> function and also function to reset phy.
>
> Signed-off-by: Calvin Johnson <calvin.johnson at nxp.com>
> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi at nxp.com>
> ---
>  board/freescale/ls1012afrdm/Makefile          |   1 +
>  board/freescale/ls1012afrdm/eth.c             |  86 +++++++++
>  board/freescale/ls1012afrdm/ls1012afrdm.c     |   5 -
>  board/freescale/ls1012aqds/Makefile           |   1 +
>  board/freescale/ls1012aqds/eth.c              | 263 ++++++++++++++++++++++++++
>  board/freescale/ls1012aqds/ls1012aqds.c       |  97 +++++++++-
>  board/freescale/ls1012aqds/ls1012aqds_pfe.h   |  48 +++++
>  board/freescale/ls1012aqds/ls1012aqds_qixis.h |   2 +-
>  board/freescale/ls1012ardb/Makefile           |   1 +
>  board/freescale/ls1012ardb/eth.c              |  70 +++++++
>  board/freescale/ls1012ardb/ls1012ardb.c       |   4 -
>  include/configs/ls1012ardb.h                  |   5 +
>  12 files changed, 568 insertions(+), 15 deletions(-)
>  create mode 100644 board/freescale/ls1012afrdm/eth.c
>  create mode 100644 board/freescale/ls1012aqds/eth.c
>  create mode 100644 board/freescale/ls1012aqds/ls1012aqds_pfe.h
>  create mode 100644 board/freescale/ls1012ardb/eth.c

It seems reasonable to add support for each platform in individual patches.

-Joe