[U-Boot] [PATCH] sunxi: Fix UART console index for A33-OLinuXino

[Jagan Teki]

On Tue, Dec 5, 2017 at 3:11 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote:
>> The A33-OLinuXino defconfig was using the default CONS_INDEX value for
>> A33, which actually points to the R_UART, which is routed to the GPIO
>> header without proper pull-ups or diodes. The board has a separate
>> header for UART0, which are routed to pins PB0 and PB1. This header
>> is properly marked and is likely the first pins any user would try
>> to get a console.
>>
>> Fix CONS_INDEX in the defconfig so the console appears on UART0.
>>
>> Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board")
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Applied to u-boot-sunxi/master