[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC1 support

[Minkyu Kang]

Hi,

2017. 11. 11. 05:19에 "Krzysztof Kozlowski" <krzk at kernel.org>님이 작성:

On Fri, Nov 03, 2017 at 09:30:30AM +0100, Marek Szyprowski wrote:
> Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
> no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
> button. USB3.0 ports are used for build-in JMicron USB to SATA bridge
> and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.
>
> This patch also updates Odroid's ADCmax array and reduces ADC tolerance
> to 1% to ensure that XU4 and HC1 revisions are properly detected.
>
> I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my
test
> boards I got following values from ADC register: 372, 370, 1281 and 1313.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  board/samsung/common/exynos5-dt-types.c | 27 ++++++++++++++++++++-------
>  board/samsung/common/exynos5-dt.c       |  4 ++--
>  configs/odroid-xu3_defconfig            |  2 +-
>  include/samsung/exynos5-dt-types.h      |  2 ++
>  4 files changed, 25 insertions(+), 10 deletions(-)
>

Tested on Odroid HC1 with tftpboot:
Tested-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot


applied to u-boot-samsung.

Thanks,
Minkyu Kang.