[U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support

[Stefano Babic]

Hi Martyn,

On 08/11/2017 16:59, Martyn Welch wrote:
> This series improves the support on the bx50v3 devices (b540v3, b650v3 and
> b850v3) and utilising features recently added as part of the PPD 
> implementation.
> 
> NOTE: This series requires the PPD series:
>     https://lists.denx.de/pipermail/u-boot/2017-November/310865.html
> 
> Changes outside of the bx50v3/ppd specifc areas:
> 
>  - Added driver for RX8010SJ RTC.
>  - Added functionality to e1000 driver to enable wrting of EEPROM/MAC
>    address.
> 
> Hannu Lounento (5):
>   net: e1000: add support for writing to EEPROM
>   net: e1000: split e1000_read_mac_addr
>   net: e1000: implement eth_write_hwaddr
>   board: ge: bx50v3: program MAC address to I210
>   board: ge: bx50v3: mount rootfs read-only
> 
> Ian Ray (5):
>   configs: Add network device support for bx50v3 products
>   board: ge: bx50v3: Support FIT and select configuration based on VPD
>   config: ge_bx50v3: read boot script
>   configs: ge_bx50v3: enable bootcount
>   configs: ge_bx50v3: automatic partition selection and video output
>     failure message
> 
> Martyn Welch (4):
>   board: ge: mx53ppd: Move check_time() to common location
>   board: ge: Enable access to i2c bus 1 and 2
>   board: ge: bx50v3: move FEC MAC address programming to driver
>   board: ge: bx50v3: Enable hardware watchdog
> 
> Nandor Han (2):
>   rtc: adding RX8010SJ rtc driver
>   board,ge,bx50v3 - rtc time validation
> 
>  board/ge/bx50v3/bx50v3.c    | 130 ++++++++++-----
>  board/ge/common/Makefile    |   2 +-
>  board/ge/common/ge_common.c |  55 +++++++
>  board/ge/common/ge_common.h |   7 +
>  board/ge/mx53ppd/mx53ppd.c  |  47 +-----
>  configs/ge_b450v3_defconfig |   7 +-
>  configs/ge_b650v3_defconfig |   7 +-
>  configs/ge_b850v3_defconfig |   8 +-
>  drivers/net/e1000.c         | 292 +++++++++++++++++++++++++++++++---
>  drivers/net/e1000.h         |   3 +
>  drivers/rtc/Kconfig         |   6 +
>  drivers/rtc/Makefile        |   1 +
>  drivers/rtc/rx8010sj.c      | 378 ++++++++++++++++++++++++++++++++++++++++++++
>  include/configs/ge_bx50v3.h | 190 +++++++++-------------
>  14 files changed, 911 insertions(+), 222 deletions(-)
>  create mode 100644 board/ge/common/ge_common.c
>  create mode 100644 board/ge/common/ge_common.h
>  create mode 100644 drivers/rtc/rx8010sj.c
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================