[U-Boot] [PATCH 02/10] ata: Drop CONFIG_MX51_PATA

[Tuomas Tynkkynen]

The last user of this driver went away in August 2015 in commit:
b6073fd2115 ("arm: Remove mx51_efikamx, mx51_efikasb boards")

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
---
 drivers/ata/Makefile  |   1 -
 drivers/ata/mxc_ata.c | 129 --------------------------------------------------
 2 files changed, 130 deletions(-)
 delete mode 100644 drivers/ata/mxc_ata.c

diff --git drivers/ata/Makefile drivers/ata/Makefile
index 7a4c8c6bf2..a94c804e7a 100644
--- drivers/ata/Makefile
+++ drivers/ata/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
 obj-$(CONFIG_FSL_SATA) += fsl_sata.o
 obj-$(CONFIG_LIBATA) += libata.o
 obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
-obj-$(CONFIG_MX51_PATA) += mxc_ata.o
 obj-$(CONFIG_SATA) += sata.o
 obj-$(CONFIG_SATA_CEVA) += sata_ceva.o
 obj-$(CONFIG_SATA_MV) += sata_mv.o
diff --git drivers/ata/mxc_ata.c drivers/ata/mxc_ata.c
deleted file mode 100644
index 44bb406f4d..0000000000
--- drivers/ata/mxc_ata.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Freescale iMX51 ATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
- *
- * Based on code by:
- *	Mahesh Mahadevan <mahesh.mahadevan at freescale.com>
- *
- * Based on code from original FSL ATA driver, which is
- * part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <ide.h>
-
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-
-/* MXC ATA register offsets */
-struct mxc_ata_config_regs {
-	u8	time_off;	/* 0x00 */
-	u8	time_on;
-	u8	time_1;
-	u8	time_2w;
-	u8	time_2r;
-	u8	time_ax;
-	u8	time_pio_rdx;
-	u8	time_4;
-	u8	time_9;
-	u8	time_m;
-	u8	time_jn;
-	u8	time_d;
-	u8	time_k;
-	u8	time_ack;
-	u8	time_env;
-	u8	time_udma_rdx;
-	u8	time_zah;	/* 0x10 */
-	u8	time_mlix;
-	u8	time_dvh;
-	u8	time_dzfs;
-	u8	time_dvs;
-	u8	time_cvh;
-	u8	time_ss;
-	u8	time_cyc;
-	u32	fifo_data_32;	/* 0x18 */
-	u32	fifo_data_16;
-	u32	fifo_fill;
-	u32	ata_control;
-	u32	interrupt_pending;
-	u32	interrupt_enable;
-	u32	interrupt_clear;
-	u32	fifo_alarm;
-};
-
-struct mxc_data_hdd_regs {
-	u32	drive_data;	/* 0xa0 */
-	u32	drive_features;
-	u32	drive_sector_count;
-	u32	drive_sector_num;
-	u32	drive_cyl_low;
-	u32	drive_cyl_high;
-	u32	drive_dev_head;
-	u32	command;
-	u32	status;
-	u32	alt_status;
-};
-
-/* PIO timing table */
-#define	NR_PIO_SPECS	5
-static uint16_t pio_t1[NR_PIO_SPECS]	= { 70,  50,  30,  30,  25 };
-static uint16_t pio_t2_8[NR_PIO_SPECS]	= { 290, 290, 290, 80,  70 };
-static uint16_t pio_t4[NR_PIO_SPECS]	= { 30,  20,  15,  10,  10 };
-static uint16_t pio_t9[NR_PIO_SPECS]	= { 20,  15,  10,  10,  10 };
-static uint16_t pio_tA[NR_PIO_SPECS]	= { 50,  50,  50,  50,  50 };
-
-#define	REG2OFF(reg)	((((uint32_t)reg) & 0x3) * 8)
-static void set_ata_bus_timing(unsigned char mode)
-{
-	uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK);
-
-	struct mxc_ata_config_regs *ata_regs;
-	ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
-
-	if (mode >= NR_PIO_SPECS)
-		return;
-
-	/* Write TIME_OFF/ON/1/2W */
-	writeb(3, &ata_regs->time_off);
-	writeb(3, &ata_regs->time_on);
-	writeb((pio_t1[mode] + T) / T, &ata_regs->time_1);
-	writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w);
-
-	/* Write TIME_2R/AX/RDX/4 */
-	writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r);
-	writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax);
-	writeb(1, &ata_regs->time_pio_rdx);
-	writeb((pio_t4[mode] + T) / T, &ata_regs->time_4);
-
-	/* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
-	writeb((pio_t9[mode] + T) / T, &ata_regs->time_9);
-}
-
-int ide_preinit(void)
-{
-	struct mxc_ata_config_regs *ata_regs;
-	ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
-
-	/* 46.3.3.4 @ FSL iMX51 manual */
-	/* FIFO normal op., drive reset */
-	writel(0x80, &ata_regs->ata_control);
-	/* FIFO normal op., drive not reset */
-	writel(0xc0, &ata_regs->ata_control);
-
-	/* Configure the PIO timing */
-	set_ata_bus_timing(CONFIG_MXC_ATA_PIO_MODE);
-
-	/* 46.3.3.4 @ FSL iMX51 manual */
-	/* Drive not reset, IORDY handshake */
-	writel(0x41, &ata_regs->ata_control);
-
-	return 0;
-}
-- 
2.15.0