[U-Boot] [PATCH v6 07/20] common: Generic firmware loader for file system
Chee, Tien Fong
tien.fong.chee at intel.com
Mon Dec 11 10:08:53 UTC 2017
On Isn, 2017-12-11 at 18:06 +0800, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee at intel.com>
>
> This is file system generic loader which can be used to load
> the file image from the storage into target such as memory.
> The consumer driver would then use this loader to program whatever,
> ie. the FPGA device.
>
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> ---
> common/Makefile | 1 +
> common/fs_loader.c | 299
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/fs_loader.h | 30 ++++++
> 3 files changed, 330 insertions(+)
> create mode 100644 common/fs_loader.c
> create mode 100644 include/fs_loader.h
>
> diff --git a/common/Makefile b/common/Makefile
> index cec506f..2934221 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -130,3 +130,4 @@ obj-$(CONFIG_CMD_DFU) += dfu.o
> obj-y += command.o
> obj-y += s_record.o
> obj-y += xyzModem.o
> +obj-y += fs_loader.o
> diff --git a/common/fs_loader.c b/common/fs_loader.c
> new file mode 100644
> index 0000000..269af25
> --- /dev/null
> +++ b/common/fs_loader.c
> @@ -0,0 +1,299 @@
> +/*
> + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <fs.h>
> +#include <fs_loader.h>
> +#include <nand.h>
> +#include <sata.h>
> +#include <spi.h>
> +#include <spi_flash.h>
> +#include <spl.h>
> +#include <linux/string.h>
> +#include <usb.h>
> +
> +static struct device_location default_locations[] = {
> + {
> + .name = "mmc",
> + .devpart = "0:1",
> + },
> + {
> + .name = "usb",
> + .devpart = "0:1",
> + },
> + {
> + .name = "sata",
> + .devpart = "0:1",
> + },
> +};
> +
> +/* USB build is not supported yet in SPL */
> +#ifndef CONFIG_SPL_BUILD
> +#ifdef CONFIG_USB_STORAGE
> +static int init_usb(void)
> +{
> + int err;
> +
> + err = usb_init();
> + if (err)
> + return err;
> +
> +#ifndef CONFIG_DM_USB
> + err = usb_stor_scan(1) < 0 ? -ENODEV : 0;
> +#endif
> +
> + return err;
> +}
> +#else
> +static int init_usb(void)
> +{
> + printf("Error: Cannot load flash image: no USB support\n");
> + return -ENOSYS;
> +}
> +#endif
> +#endif
> +
> +#ifdef CONFIG_SATA
> +static int init_storage_sata(void)
> +{
> + return sata_probe(0);
> +}
> +#else
> +static int init_storage_sata(void)
> +{
> + printf("Error: Cannot load image: no SATA support\n");
> + return -ENOSYS;
> +}
> +#endif
> +
> +#ifdef CONFIG_CMD_UBIFS
> +static int mount_ubifs(struct device_location *location)
> +{
> + int ret;
> + char cmd[32];
> +
> + sprintf(cmd, "ubi part %s", location->mtdpart);
> +
> + ret = run_command(cmd, 0);
> + if (ret)
> + return ret;
> +
> + sprintf(cmd, "ubifsmount %s", location->ubivol);
> +
> + ret = run_command(cmd, 0);
> +
> + return ret;
> +}
> +
> +static int umount_ubifs(void)
> +{
> + return run_command("ubifsumount", 0);
> +}
> +#else
> +static int mount_ubifs(struct device_location *location)
> +{
> + printf("Error: Cannot load image: no UBIFS support\n");
> + return -ENOSYS;
> +}
> +#endif
> +
> +#if defined(CONFIG_SPL_MMC_SUPPORT) && defined(CONFIG_SPL_BUILD)
> +static int init_mmc(void)
> +{
> + /* Just for the case MMC is not yet initialized */
> + struct mmc *mmc = NULL;
> + int err;
> +
> + spl_mmc_find_device(&mmc, spl_boot_device());
> +
> + err = mmc_init(mmc);
> + if (err) {
> + printf("spl: mmc init failed with error: %d\n",
> err);
> + return err;
> + }
> +
> + return err;
> +}
> +#else
> +static int init_mmc(void)
> +{
> + /* Expect somewhere already initialize MMC */
> + return 0;
> +}
> +#endif
> +
> +static int select_fs_dev(struct device_location *location)
> +{
> + int ret = 0;
> +
> + if (!strcmp("mmc", location->name)) {
> + ret = fs_set_blk_dev("mmc", location->devpart,
> FS_TYPE_ANY);
> + }
> + else if (!strcmp("usb", location->name)) {
> + ret = fs_set_blk_dev("usb", location->devpart,
> FS_TYPE_ANY);
> + }
> + else if (!strcmp("sata", location->name)) {
> + ret = fs_set_blk_dev("sata", location->devpart,
> FS_TYPE_ANY);
> + }
> + else if (!strcmp("ubi", location->name)) {
> + if (location->ubivol != NULL)
> + ret = fs_set_blk_dev("ubi", NULL,
> FS_TYPE_UBIFS);
> + else
> + ret = -ENODEV;
> + }
> + else {
> + printf("Error: unsupported location storage.\n");
> + return -ENODEV;
> + }
> +
> + if (ret)
> + printf("Error: could not access storage.\n");
> +
> + return ret;
> +}
> +
> +static int init_storage_device(struct device_location *location)
> +{
> + int ret = 0;
> +#ifndef CONFIG_SPL_BUILD
> + /* USB build is not supported yet in SPL */
> + if (!strcmp("usb", location->name))
> + ret = init_usb();
> +#endif
> +
> + if (!strcmp("mmc", location->name))
> + ret = init_mmc();
> +
> + if (!strcmp("sata", location->name))
> + ret = init_storage_sata();
> +
> + if (location->ubivol != NULL)
> + ret = mount_ubifs(location);
> +
> + return ret;
> +}
> +
> +static void set_storage_devpart(char *name, char *devpart)
> +{
> + size_t i;
> +
> + for (i = 0; i < ARRAY_SIZE(default_locations); i++) {
> + if (!strcmp(default_locations[i].name, name))
> + default_locations[i].devpart = devpart;
> + }
> +
> + return;
> +}
> +
> +/*
> + * Prepare firmware struct;
> + * return -ve if fail.
> + */
> +static int _request_firmware_prepare(struct firmware **firmware_p,
> + const char *name, void *dbuf,
> + size_t size, u32 offset)
> +{
> + struct firmware *firmware = NULL;
> + int ret = 0;
> +
> + *firmware_p = NULL;
> +
> + if (!name || name[0] == '\0')
> + ret = -EINVAL;
> +
> + *firmware_p = firmware = calloc(1, sizeof(*firmware));
> +
> + if (!firmware) {
> + printf("%s: calloc(struct firmware) failed\n",
> __func__);
> + return -ENOMEM;
> + }
> +
> + firmware->name = name;
> + firmware->data = dbuf;
> + firmware->size = size;
> + firmware->offset = offset;
> +
> + return ret;
> +}
> +
> +/*
> + * fw_get_filesystem_firmware - load firmware into a allocated
> buffer
> + * @firmware_p: pointer to firmware image
> + * @location: An array of supported firmware location
> + *
> + * @return: size of total read
> + * -ve when error
> + */
> +static int fw_get_filesystem_firmware(struct device_location
> *location,
> + struct firmware *firmware_p)
> +{
> + loff_t actread;
> + char *dev_part;
> + int ret;
> +
> + dev_part = env_get("FW_DEV_PART");
> + if (dev_part)
> + set_storage_devpart(location->name, dev_part);
> +
> + ret = init_storage_device(location);
> + if (ret)
> + goto out;
> +
> + select_fs_dev(location);
> +
> + ret = fs_read(firmware_p->name, (ulong)firmware_p->data,
> + firmware_p->offset, firmware_p->size,
> &actread);
> +
> + if (ret || (actread != firmware_p->size)) {
> + printf("Error: %d Failed to read %s from flash %lld
> ",
> + ret,
> + firmware_p->name,
> + actread);
> + printf("!= %d.\n", firmware_p->size);
> + return -EPERM;
> + } else {
> + ret = actread;
> + }
> +
> +out:
> +#ifdef CONFIG_CMD_UBIFS
> + if (location->ubivol != NULL)
> + umount_ubifs();
> +#endif
> +
> + return ret;
> +}
> +
> +/*
> + * request_firmware_into_buf - load firmware into a previously
> allocated buffer
> + * @firmware_p: pointer to firmware image
> + * @name: name of firmware file
> + * @buf: address of buffer to load firmware into
> + * @size: size of buffer
> + * @offset: offset of a file for start reading
> + *
> + * This firmware is loaded directly into the buffer pointed to by
> @buf and
> + * the @firmware_p data member is pointed at @buf.
> + *
> + * @return: size of total read
> + * -ve when error
> + */
> +int request_firmware_into_buf(struct firmware **firmware_p,
> + const char *name,
> + struct device_location *location,
> + void *buf, size_t size, u32 offset)
> +{
> + int ret;
> +
> + ret = _request_firmware_prepare(firmware_p, name, buf, size,
> offset);
> + if (ret < 0) /* error */
> + return ret;
> +
> + ret = fw_get_filesystem_firmware(location, *firmware_p);
> +
> + return ret;
> +}
> diff --git a/include/fs_loader.h b/include/fs_loader.h
> new file mode 100644
> index 0000000..dacc1f3
> --- /dev/null
> +++ b/include/fs_loader.h
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +#ifndef _FS_LOADER_H_
> +#define _FS_LOADER_H_
> +
> +#include <linux/types.h>
> +
> +struct firmware {
> + size_t size; /* Size of a file */
> + const u8 *data; /* Buffer for file */
> + const char *name; /* Filename */
> + u32 offset; /* Offset of reading a file */
> + void *priv; /* Firmware loader private fields
> */
> +};
> +
> +struct device_location {
> + char *name; /* Such as mmc, usb,and sata. */
> + char *devpart; /* Use the load command dev:part conventions
> */
> + char *mtdpart; /* MTD partition for ubi part */
> + char *ubivol; /* UBI volume-name for ubifsmount */
> +};
> +
> +int request_firmware_into_buf(struct firmware **firmware_p,
> + const char *name,
> + struct device_location *location,
> + void *buf, size_t size, u32 offset);
> +#endif
More information about the U-Boot
mailing list