[U-Boot] [PATCH 2/4] ARM: meson: add clock measurement function

[Simon Glass]

Hi Benjamin,

On 3 December 2017 at 02:17, Beniamino Galvani <b.galvani at gmail.com> wrote:
> Add add a function to measure the current clock rate.
>
> Signed-off-by: Beniamino Galvani <b.galvani at gmail.com>
> ---
>  arch/arm/include/asm/arch-meson/clock.h | 34 +++++++++++++++++++++++++
>  arch/arm/mach-meson/Makefile            |  2 +-
>  arch/arm/mach-meson/clock.c             | 45 +++++++++++++++++++++++++++++++++
>  3 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/include/asm/arch-meson/clock.h
>  create mode 100644 arch/arm/mach-meson/clock.c
>
> diff --git a/arch/arm/include/asm/arch-meson/clock.h b/arch/arm/include/asm/arch-meson/clock.h
> new file mode 100644
> index 0000000000..b43b23386c
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-meson/clock.h
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright 2017 - Beniamino Galvani <b.galvani at gmail.com>
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +#ifndef _MESON_CLOCK_H_
> +#define _MESON_CLOCK_H_
> +
> +/* CBUS clock measure registers */
> +#define MSR_CLK_DUTY           0xc1108758
> +#define MSR_CLK_REG0           0xc110875c
> +#define MSR_CLK_REG1           0xc1108760
> +#define MSR_CLK_REG2           0xc1108764
> +
> +#define CLK_GP0_PLL            4
> +#define CLK_GP1_PLL            5
> +#define CLK_81                 7
> +#define CLK_MMC                        23
> +#define CLK_MOD_ETH_TX         40
> +#define CLK_MOD_ETH_RX_RMII    41
> +#define CLK_FCLK_DIV5          43
> +#define CLK_SD_EMMC_CLK_C      51
> +#define CLK_SD_EMMC_CLK_B      52

Are these constants in the dt-binding file somewhere?

> +
> +/* Clock gates */
> +#define HHI_GCLK_MPEG0         0x140
> +#define HHI_GCLK_MPEG1         0x144
> +#define HHI_GCLK_MPEG2         0x148
> +#define HHI_GCLK_OTHER         0x150
> +#define HHI_GCLK_AO            0x154
> +
> +ulong meson_measure_clk_rate(unsigned int clk);

Please can you add a function comment and mention error-return values also?

> +
> +#endif
> diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile
> index bf49b8b1e5..e7ea4fc5b0 100644
> --- a/arch/arm/mach-meson/Makefile
> +++ b/arch/arm/mach-meson/Makefile
> @@ -4,4 +4,4 @@
>  # SPDX-License-Identifier:     GPL-2.0+
>  #
>
> -obj-y += board.o sm.o
> +obj-y += board.o clock.o sm.o
> diff --git a/arch/arm/mach-meson/clock.c b/arch/arm/mach-meson/clock.c
> new file mode 100644
> index 0000000000..73be11e90d
> --- /dev/null
> +++ b/arch/arm/mach-meson/clock.c
> @@ -0,0 +1,45 @@
> +/*
> + * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + *
> + * Clock rate measuring.
> + */
> +
> +#include <common.h>
> +#include <asm/arch/clock.h>
> +#include <asm/io.h>
> +
> +ulong meson_measure_clk_rate(unsigned int clk)
> +{
> +       ulong start;
> +       ulong mhz;
> +
> +       writel(0, MSR_CLK_REG0);
> +
> +       /* Set the measurement gate to 64uS */
> +       clrsetbits_le32(MSR_CLK_REG0, 0xffff, 64 - 1);
> +       clrbits_le32(MSR_CLK_REG0,
> +                    BIT(17) |          /* disable continuous measurement */
> +                    BIT(18));          /* disable interrupts */
> +       clrsetbits_le32(MSR_CLK_REG0,
> +                       GENMASK(20, 26),
> +                       clk << 20);     /* select the clock */
> +       setbits_le32(MSR_CLK_REG0,
> +                    BIT(19) |          /* enable the clock */
> +                    BIT(16));          /* enable measuring */
> +
> +       start = get_timer(0);
> +       while (readl(MSR_CLK_REG0) & BIT(31)) {
> +               if (get_timer(start) > 100) {

How long does this take to measure? Is it up to 100ms?

> +                       debug("could not measure clk %u rate\n", clk);
> +                       return -ETIMEDOUT;
> +               }
> +       }
> +
> +       /* Disable measuring */
> +       clrbits_le32(MSR_CLK_REG0, BIT(16));
> +
> +       mhz = ((readl(MSR_CLK_REG2) + 31) & 0xfffff) >> 6;
> +       return mhz * 1000000;
> +}
> --
> 2.14.3
>


Regards,
Simon