[U-Boot] [PATCH 14/16] configs: sun50i: add usb-otg support for a64-olinuxino

Maxime Ripard maxime.ripard at free-electrons.com
Tue Dec 12 08:12:36 UTC 2017


Hi,

On Tue, Dec 12, 2017 at 12:28:29PM +0530, Jagan Teki wrote:
> USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or
> vbus pin(PH6) through AXP_GPIO driver.
> 
> This patch add support for it.
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  configs/a64-olinuxino_defconfig | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig
> index 63a0048..4c3fe75 100644
> --- a/configs/a64-olinuxino_defconfig
> +++ b/configs/a64-olinuxino_defconfig
> @@ -2,6 +2,9 @@ CONFIG_ARM=y
>  CONFIG_ARCH_SUNXI=y
>  CONFIG_MACH_SUN50I=y
>  CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> +CONFIG_USB0_ID_DET="PH9"
> +CONFIG_USB0_VBUS_DET="PH6"
> +CONFIG_AXP_GPIO=y
>  CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
>  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>  CONFIG_SPL=y
> @@ -12,4 +15,5 @@ CONFIG_SPL=y
>  # CONFIG_SPL_EFI_PARTITION is not set
>  CONFIG_SUN8I_EMAC=y
>  CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_MUSB_GADGET=y

Same question, did you test the host mode?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171212/ce251d13/attachment.sig>


More information about the U-Boot mailing list