[U-Boot] [RESEND PATCH 06/14] board: stm32f429-disco: switch to DM STM32 serial driver
patrice.chotard at st.com
patrice.chotard at st.com
Tue Dec 12 08:49:37 UTC 2017
From: Patrice Chotard <patrice.chotard at st.com>
Remove serial_stm32.c driver and uart init from board file,
use available DM serial_stm32x7.c driver compatible for
STM32F4/F7 and H7 SoCs.
The serial_stm32x7.c driver will be renamed later with a more
generic name as it's shared with all STM32 Socs.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
arch/arm/include/asm/arch-stm32f4/stm32.h | 8 --
board/st/stm32f429-discovery/stm32f429-discovery.c | 10 --
configs/stm32f429-discovery_defconfig | 1 +
drivers/serial/serial_stm32.c | 117 ---------------------
include/configs/stm32f429-discovery.h | 1 -
5 files changed, 1 insertion(+), 136 deletions(-)
delete mode 100644 drivers/serial/serial_stm32.c
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h
index e9f3aab..bd5c2ec 100644
--- a/arch/arm/include/asm/arch-stm32f4/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f4/stm32.h
@@ -59,14 +59,6 @@ struct stm32_pwr_regs {
#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000)
#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE)
-/*
- * Peripheral base addresses
- */
-#define STM32_USART1_BASE (STM32_APB2PERIPH_BASE + 0x1000)
-#define STM32_USART2_BASE (STM32_APB1PERIPH_BASE + 0x4400)
-#define STM32_USART3_BASE (STM32_APB1PERIPH_BASE + 0x4800)
-#define STM32_USART6_BASE (STM32_APB2PERIPH_BASE + 0x1400)
-
#define FLASH_CNTL_BASE (STM32_AHB1PERIPH_BASE + 0x3C00)
static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 7e8df8e..7e62bd2 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -17,7 +17,6 @@
#include <asm/io.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
-#include <dm/platform_data/serial_stm32.h>
#include <asm/arch/stm32_periph.h>
#include <asm/arch/stm32_defs.h>
@@ -168,15 +167,6 @@ int dram_init_banksize(void)
return 0;
}
-static const struct stm32_serial_platdata serial_platdata = {
- .base = (struct stm32_usart *)STM32_USART1_BASE,
-};
-
-U_BOOT_DEVICE(stm32_serials) = {
- .name = "serial_stm32",
- .platdata = &serial_platdata,
-};
-
u32 get_board_rev(void)
{
return 0;
diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig
index 15ff646..ae106ff 100644
--- a/configs/stm32f429-discovery_defconfig
+++ b/configs/stm32f429-discovery_defconfig
@@ -27,3 +27,4 @@ CONFIG_RAM=y
CONFIG_STM32_SDRAM=y
CONFIG_DM_RESET=y
CONFIG_STM32_RESET=y
+CONFIG_STM32X7_SERIAL=y
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
deleted file mode 100644
index c793ba6..0000000
--- a/drivers/serial/serial_stm32.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <serial.h>
-#include <asm/arch/stm32.h>
-#include <dm/platform_data/serial_stm32.h>
-
-struct stm32_usart {
- u32 sr;
- u32 dr;
- u32 brr;
- u32 cr1;
- u32 cr2;
- u32 cr3;
- u32 gtpr;
-};
-
-#define USART_CR1_RE (1 << 2)
-#define USART_CR1_TE (1 << 3)
-#define USART_CR1_UE (1 << 13)
-
-#define USART_SR_FLAG_RXNE (1 << 5)
-#define USART_SR_FLAG_TXE (1 << 7)
-
-#define USART_BRR_F_MASK 0xF
-#define USART_BRR_M_SHIFT 4
-#define USART_BRR_M_MASK 0xFFF0
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
-{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
- u32 clock, int_div, frac_div, tmp;
-
- if (((u32)usart & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE)
- clock = clock_get(CLOCK_APB1);
- else if (((u32)usart & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE)
- clock = clock_get(CLOCK_APB2);
- else
- return -EINVAL;
-
- int_div = (25 * clock) / (4 * baudrate);
- tmp = ((int_div / 100) << USART_BRR_M_SHIFT) & USART_BRR_M_MASK;
- frac_div = int_div - (100 * (tmp >> USART_BRR_M_SHIFT));
- tmp |= (((frac_div * 16) + 50) / 100) & USART_BRR_F_MASK;
- writel(tmp, &usart->brr);
-
- return 0;
-}
-
-static int stm32_serial_getc(struct udevice *dev)
-{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
-
- if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
- return -EAGAIN;
-
- return readl(&usart->dr);
-}
-
-static int stm32_serial_putc(struct udevice *dev, const char c)
-{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
-
- if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0)
- return -EAGAIN;
-
- writel(c, &usart->dr);
-
- return 0;
-}
-
-static int stm32_serial_pending(struct udevice *dev, bool input)
-{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
-
- if (input)
- return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0;
- else
- return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1;
-}
-
-static int stm32_serial_probe(struct udevice *dev)
-{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
- setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
-
- return 0;
-}
-
-static const struct dm_serial_ops stm32_serial_ops = {
- .putc = stm32_serial_putc,
- .pending = stm32_serial_pending,
- .getc = stm32_serial_getc,
- .setbrg = stm32_serial_setbrg,
-};
-
-U_BOOT_DRIVER(serial_stm32) = {
- .name = "serial_stm32",
- .id = UCLASS_SERIAL,
- .ops = &stm32_serial_ops,
- .probe = stm32_serial_probe,
- .flags = DM_FLAG_PRE_RELOC,
-};
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index 317b934..934acbc 100644
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -43,7 +43,6 @@
#define CONFIG_STM32_GPIO
#define CONFIG_STM32_FLASH
-#define CONFIG_STM32_SERIAL
#define CONFIG_STM32_HSE_HZ 8000000
--
1.9.1
More information about the U-Boot
mailing list