[U-Boot] [PATCH v2 15/78] spi: Remove obsolete spi_base_setup_slave_fdt

[Mario Six]

0efc024 ("spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT
node") added a helper function spi_base_setup_slave_fdt to to set up a
SPI slave from a given FDT blob. The only user was the exynos SPI
driver.

But commit 73186c9 ("dm: exynos: Convert SPI to driver model") removed
the use of this function, hence rendering it obsolete.

Remove this function, as well as the CONFIG_OF_SPI option, which guarded
only this function.

Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Jagan Teki <jagan at openedev.com>
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---

v1 -> v2:
None

---
 drivers/spi/spi.c            | 20 --------------------
 include/spi.h                | 14 --------------
 scripts/config_whitelist.txt |  1 -
 3 files changed, 35 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index dea8dcda5b..45e73d28e4 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -39,23 +39,3 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,

 	return ptr;
 }
-
-#ifdef CONFIG_OF_SPI
-struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
-					   int node)
-{
-	int cs, max_hz, mode = 0;
-
-	cs = fdtdec_get_int(blob, node, "reg", -1);
-	max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 100000);
-	if (fdtdec_get_bool(blob, node, "spi-cpol"))
-		mode |= SPI_CPOL;
-	if (fdtdec_get_bool(blob, node, "spi-cpha"))
-		mode |= SPI_CPHA;
-	if (fdtdec_get_bool(blob, node, "spi-cs-high"))
-		mode |= SPI_CS_HIGH;
-	if (fdtdec_get_bool(blob, node, "spi-half-duplex"))
-		mode |= SPI_PREAMBLE;
-	return spi_setup_slave(busnum, cs, max_hz, mode);
-}
-#endif
diff --git a/include/spi.h b/include/spi.h
index 8c4b882c54..9c69cd7e87 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -328,20 +328,6 @@ static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
  */
 struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
 				      int spi_node);
-
-/**
- * spi_base_setup_slave_fdt() - helper function to set up a SPI slace
- *
- * This decodes SPI properties from the slave node to determine the
- * chip select and SPI parameters.
- *
- * @blob:	Device tree blob
- * @busnum:	Bus number to use
- * @node:	Device tree node for the SPI bus
- */
-struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
-					   int node);
-
 #ifdef CONFIG_DM_SPI

 /**
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d5ae1f4685..0dc473895c 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1571,7 +1571,6 @@ CONFIG_NUM_PAMU
 CONFIG_ODROID_REV_AIN
 CONFIG_OFF_PADCONF
 CONFIG_OF_
-CONFIG_OF_SPI
 CONFIG_OF_SPI_FLASH
 CONFIG_OF_STDOUT_PATH
 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO
--
2.13.6