[U-Boot] [PATCH v2 54/78] cfi_flash: Rename camel-case variables
Mario Six
mario.six at gdsys.cc
Wed Dec 13 07:19:22 UTC 2017
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
v1 -> v2:
None
---
drivers/mtd/cfi_flash.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 8040e43de7..e94a7269e1 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1687,8 +1687,8 @@ static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
static void cmdset_amd_read_jedec_ids(flash_info_t *info)
{
- ushort bankId = 0;
- uchar manuId;
+ ushort bank_id = 0;
+ uchar manu_id;
uchar feature;
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
@@ -1696,14 +1696,14 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info)
flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
udelay(1000); /* some flash are slow to respond */
- manuId = flash_read_uchar(info, FLASH_OFFSET_MANUFACTURER_ID);
+ manu_id = flash_read_uchar(info, FLASH_OFFSET_MANUFACTURER_ID);
/* JEDEC JEP106Z specifies ID codes up to bank 7 */
- while (manuId == FLASH_CONTINUATION_CODE && bankId < 0x800) {
- bankId += 0x100;
- manuId = flash_read_uchar(info,
- bankId | FLASH_OFFSET_MANUFACTURER_ID);
+ while (manu_id == FLASH_CONTINUATION_CODE && bank_id < 0x800) {
+ bank_id += 0x100;
+ manu_id = flash_read_uchar(info,
+ bank_id | FLASH_OFFSET_MANUFACTURER_ID);
}
- info->manufacturer_id = manuId;
+ info->manufacturer_id = manu_id;
debug("info->ext_addr = 0x%x, cfi_version = 0x%x\n",
info->ext_addr, info->cfi_version);
--
2.13.6
More information about the U-Boot
mailing list