[U-Boot] [PATCH 00/16] sun50i: a64: add support for axp803, musb

[Jagan Teki]

On Tue, Dec 12, 2017 at 1:47 PM, Chen-Yu Tsai <wens at csie.org> wrote:
> Hi,
>
> On Tue, Dec 12, 2017 at 2:58 PM, Jagan Teki <jagan at amarulasolutions.com> wrote:
>> This series deals axp803, musb and related improvements on a64
>> - axp803 PMIC support used by a64
>> - a64 musb improvements (rework by Philipp [1])
>> - musb support for bananapi-m64, a64-olinuxino
>>
>> [1] https://patchwork.ozlabs.org/patch/729246/
>>
>> Jagan Teki (11):
>>   power: sunxi: add AXP803 PMIC support
>>   sunxi: adjust usb bases between H3_H5 vs a64
>>   musb-new: sunxi: add common SUNXI_MUSB_BASE
>>   sunxi: usb_phy: Update a64 sunxi_usb_phy base
>>   arm64: allwinner: sync bananapi-m64 usb nodes from Linux
>>   configs: sun50i: add usb-otg support for bananapi-m64
>>   configs: sun50i: enable ums on bananapi-m64
>>   arm64: allwinner: sync a64-olinuxino usb nodes from Linux
>>   configs: sun50i: add usb-otg support for a64-olinuxino
>>   configs: sun50i: enable ums on a64-olinuxino
>>   configs: sun50i: Enable eMMC on a64-olinuxino
>>
>> Philipp Tomsich (5):
>>   sunxi (sun50i): Set CONFIG_SUNXI_USB_PHYS to 2 (the A64 has 2 PHYs)
>>   musb-new: sunxi: a64: add support to select shared phy
>>   musb-new: sunxi: a64: adds support for clearing the SIDDP
>>   usb: sunxi: set up usb_phy_passby only for HCI
>>   sunxi: clock: update a64 usb clock gating and module reset bits
>
> FYI I've been working on getting OTG working for the H3. There are
> quite a few similar things to change, which is where my musb patch
> came from.

OK, are these changes on ML yet? I think H5 also similar like H3. I'm
trying for that as well.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.