[U-Boot] Please pull u-boot-mmc master

[Jaehoon Chung]

Dear Tom,

Could you pull these patches to u-boot/master?
Sorry for late. We want to support HS200/UHS mode at v2018.01.

I have tested the buildman about all configs.
I didn't see any problem, but if i missed something, let me know, plz.

The following changes since commit 659208da4703de50826a469cbb38bf6afb938978:

  README: update the kernel coding style reference (2017-12-12 21:34:10 -0500)

are available in the Git repository at:

  git://git.denx.de/u-boot-mmc.git master

for you to fetch changes up to e40a090b46475fc9e86b125f67cc16f3b1ad6e04:

  configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL (2017-12-14 11:12:21 +0900)

----------------------------------------------------------------
Felix Brack (1):
      mmc: sanitize includes for DM i2c

Heinrich Schuchardt (1):
      mmc: sdhci: do not compare pointer to 0

Jaehoon Chung (1):
      mmc: meson_gx_mmc: fix the complie error

Jean-Jacques Hiblot (28):
      mmc: dm: get the IO-line and main voltage regulators from the dts
      mmc: split mmc_startup()
      mmc: move the MMC startup for version above v4.0 in a separate function
      mmc: make ext_csd part of struct mmc
      mmc: add a function to read and test the ext csd (mmc >= 4)
      mmc: introduce mmc modes
      mmc: Add a function to dump the mmc capabilities
      mmc: use mmc modes to select the correct bus speed
      cmd: mmc: display the mode name and current bus speed in the mmc info
      mmc: refactor SD startup to make it easier to support new modes
      mmc: refactor MMC startup to make it easier to support new modes
      mmc: Add a new callback function to perform the 74 clocks cycle sequence
      mmc: Add support for UHS modes
      mmc: disable UHS modes if Vcc cannot be switched on and off
      mmc: Change mode when switching to a boot partition
      mmc: use the right voltage level for MMC DDR and HS200 modes
      mmc: add a library function to send tuning command
      mmc: dump card and host capabilities if debug is enabled
      dm: mmc: update mmc_of_parse()
      mmc: Fixed a problem with old sd or mmc that do not support High speed
      mmc: all hosts support 1-bit bus width and legacy timings
      mmc: fix for old MMCs (below version 4)
      mmc: don't use malloc_cache_aligned()
      mmc: convert most of printf() to pr_err() and pr_warn()
      mmc: make UHS and HS200 optional
      mmc: make optional the support for eMMC hardware partitioning
      configs: openrd: removed support for eMMC hardware partitioning
      configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL

Jorge Ramirez-Ortiz (1):
      mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT

Kishon Vijay Abraham I (9):
      mmc: make mmc_set_ios() return status
      mmc: Enable signal voltage to be selected from mmc core
      mmc: add power cyle support in mmc core
      mmc: add a new mmc parameter to disable mmc clock
      mmc: disable the mmc clock during power off
      mmc: Add a execute_tuning() callback to the mmc operations.
      mmc: add HS200 support in MMC core
      mmc: Retry some MMC cmds on failure
      dm: mmc: Add a library function to parse generic dt binding

Suniel Mahesh (2):
      drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
      drivers: mmc: Avoid memory leak in case of failure

 cmd/mmc.c                         |   11 +-
 configs/omapl138_lcdk_defconfig   |    1 +
 configs/openrd_base_defconfig     |    1 +
 configs/openrd_client_defconfig   |    1 +
 configs/openrd_ultimate_defconfig |    1 +
 drivers/mmc/Kconfig               |   69 ++
 drivers/mmc/exynos_dw_mmc.c       |    3 +
 drivers/mmc/fsl_esdhc.c           |    2 +-
 drivers/mmc/meson_gx_mmc.c        |    2 +-
 drivers/mmc/mmc-uclass.c          |   97 ++-
 drivers/mmc/mmc.c                 | 1613 ++++++++++++++++++++++++++++---------
 drivers/mmc/omap_hsmmc.c          |    4 +-
 drivers/mmc/sdhci.c               |    7 +-
 include/mmc.h                     |  204 ++++-
 14 files changed, 1617 insertions(+), 399 deletions(-)

Best Regards,
Jaehoon Chung