[U-Boot] [PATCH 00/16] sun50i: a64: add support for axp803, musb

[Chen-Yu Tsai]

On Thu, Dec 14, 2017 at 2:21 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> On Thu, Dec 14, 2017 at 8:32 AM, Chen-Yu Tsai <wens at csie.org> wrote:
>> On Wed, Dec 13, 2017 at 7:51 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>> On Tue, Dec 12, 2017 at 1:47 PM, Chen-Yu Tsai <wens at csie.org> wrote:
>>>> Hi,
>>>>
>>>> On Tue, Dec 12, 2017 at 2:58 PM, Jagan Teki <jagan at amarulasolutions.com> wrote:
>>>>> This series deals axp803, musb and related improvements on a64
>>>>> - axp803 PMIC support used by a64
>>>>> - a64 musb improvements (rework by Philipp [1])
>>>>> - musb support for bananapi-m64, a64-olinuxino
>>>>>
>>>>> [1] https://patchwork.ozlabs.org/patch/729246/
>>>>>
>>>>> Jagan Teki (11):
>>>>>   power: sunxi: add AXP803 PMIC support
>>>>>   sunxi: adjust usb bases between H3_H5 vs a64
>>>>>   musb-new: sunxi: add common SUNXI_MUSB_BASE
>>>>>   sunxi: usb_phy: Update a64 sunxi_usb_phy base
>>>>>   arm64: allwinner: sync bananapi-m64 usb nodes from Linux
>>>>>   configs: sun50i: add usb-otg support for bananapi-m64
>>>>>   configs: sun50i: enable ums on bananapi-m64
>>>>>   arm64: allwinner: sync a64-olinuxino usb nodes from Linux
>>>>>   configs: sun50i: add usb-otg support for a64-olinuxino
>>>>>   configs: sun50i: enable ums on a64-olinuxino
>>>>>   configs: sun50i: Enable eMMC on a64-olinuxino
>>>>>
>>>>> Philipp Tomsich (5):
>>>>>   sunxi (sun50i): Set CONFIG_SUNXI_USB_PHYS to 2 (the A64 has 2 PHYs)
>>>>>   musb-new: sunxi: a64: add support to select shared phy
>>>>>   musb-new: sunxi: a64: adds support for clearing the SIDDP
>>>>>   usb: sunxi: set up usb_phy_passby only for HCI
>>>>>   sunxi: clock: update a64 usb clock gating and module reset bits
>>>>
>>>> FYI I've been working on getting OTG working for the H3. There are
>>>> quite a few similar things to change, which is where my musb patch
>>>> came from.
>>>
>>> OK, are these changes on ML yet? I think H5 also similar like H3. I'm
>>> trying for that as well.
>>
>> Not yet. I haven't been able to get it working in peripheral mode.
>> The changes for host mode are here:
>
> Ok, do you have phy data-sheet? I couldn't find it anywhere.

No. The only thing we have to go on is the BSP kernel code.

ChenYu