[U-Boot] [PATCH V2 20/23] power: pmic/regulator allow dm be omitted by SPL

Stefano Babic sbabic at denx.de
Sun Dec 17 10:33:20 UTC 2017



On 04/12/2017 05:31, Peng Fan wrote:
> Allow the dm driver be omitted by SPL.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> Cc: Jaehoon Chung <jh80.chung at samsung.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
>  drivers/power/pmic/Makefile      | 4 ++--
>  drivers/power/regulator/Makefile | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index f7bdfa5609..4abdaf6668 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -5,10 +5,10 @@
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
>  
> -obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC) += pmic-uclass.o
>  obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
>  obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
> -obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
>  obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
>  obj-$(CONFIG_PMIC_ACT8846) += act8846.o
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> index 6c149a9263..9809f7c845 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
>  obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
>  obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
>  obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
> -obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list