[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Sun Dec 17 10:39:33 UTC 2017
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit fcc8250c2f7c982f3593a8eecf737f8e2c95f222:
Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 1040d801f8ffe96c7eff16454a4529fdf1d46c50:
arm: imx: add tzic interrupt controller for imx53 (2017-12-17 11:08:38
+0100)
----------------------------------------------------------------
Adam Ford (1):
mx6_common: remove dead code
Breno Lima (5):
mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
mx6sl: Select MX6SL option via Kconfig
Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
imx: Kconfig: Add HAS_CAAM option
Christopher Spinrath (4):
ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree
with Linux
ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD
ARM: imx: cm_fx6: remove sata init code from board file
ARM: imx: cm_fx6: remove esdhc init code from board file
Fabio Estevam (3):
imx: Unify CONFIG_BOOTDELAY
imx: Add a common way for detecting NXP boards revision
mx6sxsabresd: Load the correct dtb for revA board
Hannu Lounento (5):
net: e1000: add support for writing to EEPROM
net: e1000: split e1000_read_mac_addr
net: e1000: implement eth_write_hwaddr
board: ge: bx50v3: program MAC address to I210
board: ge: bx50v3: mount rootfs read-only
Ian Ray (5):
configs: Add network device support for bx50v3 products
board: ge: bx50v3: Support FIT and select configuration based on VPD
config: ge_bx50v3: read boot script
configs: ge_bx50v3: enable bootcount
configs: ge_bx50v3: automatic partition selection and video output
failure message
Lukasz Majewski (1):
ARM: imx: display5: config: Update display5_factory_defconfig to
use USE_BOOTCOMMAND
Marek Vasut (1):
ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK
Martyn Welch (4):
board: ge: mx53ppd: Move check_time() to common location
board: ge: Enable access to i2c bus 1 and 2
board: ge: bx50v3: move FEC MAC address programming to driver
board: ge: bx50v3: Enable hardware watchdog
Nandor Han (2):
rtc: adding RX8010SJ rtc driver
board,ge,bx50v3 - rtc time validation
Patrick Bruenn (1):
arm: imx: add tzic interrupt controller for imx53
Peng Fan (2):
power: pmic.h: include dm/ofnode.h
power: pmic/regulator allow dm be omitted by SPL
Vagrant Cascadian (1):
imx: Fix missing spl_sd configuration for wandboard.
arch/arm/dts/imx53.dtsi | 8 ++
arch/arm/dts/imx6q-cm-fx6.dts | 396
+++++++++++++++++++++++++++++++++++++++++++++++--------
arch/arm/include/asm/mach-imx/sys_proto.h | 3 +
arch/arm/mach-imx/Kconfig | 13 +-
arch/arm/mach-imx/cpu.c | 25 ++++
arch/arm/mach-imx/mx6/Kconfig | 13 +-
arch/arm/mach-imx/mx7/Kconfig | 1 +
board/compulab/cm_fx6/cm_fx6.c | 71 ----------
board/dhelectronics/dh_imx6/dh_imx6_spl.c | 4 -
board/freescale/mx6sabreauto/mx6sabreauto.c | 47 +------
board/freescale/mx6slevk/imximage.cfg | 9 ++
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 16 ++-
board/ge/bx50v3/bx50v3.c | 130 ++++++++++++------
board/ge/common/Makefile | 2 +-
board/ge/common/ge_common.c | 55 ++++++++
board/ge/common/ge_common.h | 7 +
board/ge/mx53ppd/mx53ppd.c | 47 +------
board/warp/imximage.cfg | 9 ++
configs/cm_fx6_defconfig | 1 +
configs/display5_factory_defconfig | 4 +-
configs/ge_b450v3_defconfig | 7 +-
configs/ge_b650v3_defconfig | 7 +-
configs/ge_b850v3_defconfig | 8 +-
configs/mx23evk_defconfig | 1 -
configs/mx25pdk_defconfig | 1 -
configs/mx28evk_auart_console_defconfig | 1 -
configs/mx28evk_defconfig | 1 -
configs/mx28evk_nand_defconfig | 1 -
configs/mx28evk_spi_defconfig | 1 -
configs/mx31ads_defconfig | 1 -
configs/mx31pdk_defconfig | 1 -
configs/mx35pdk_defconfig | 1 -
configs/mx51evk_defconfig | 1 -
configs/mx53ard_defconfig | 1 -
configs/mx53evk_defconfig | 1 -
configs/mx53loco_defconfig | 1 -
configs/mx53smd_defconfig | 1 -
configs/mx6sabreauto_defconfig | 2 +-
configs/mx6sabresd_defconfig | 1 -
configs/mx6slevk_defconfig | 3 +-
configs/mx6slevk_spinor_defconfig | 3 +-
configs/mx6slevk_spl_defconfig | 3 +-
configs/mx6sllevk_defconfig | 1 -
configs/mx6sllevk_plugin_defconfig | 1 -
configs/mx6sxsabreauto_defconfig | 1 -
configs/mx6sxsabresd_defconfig | 2 +-
configs/mx6sxsabresd_spl_defconfig | 2 +-
configs/mx6ul_14x14_evk_defconfig | 1 -
configs/mx6ul_9x9_evk_defconfig | 1 -
configs/mx6ull_14x14_evk_defconfig | 1 -
configs/mx6ull_14x14_evk_plugin_defconfig | 1 -
configs/mx7dsabresd_defconfig | 1 -
configs/mx7dsabresd_secure_defconfig | 1 -
configs/wandboard_defconfig | 1 +
configs/warp_defconfig | 2 +-
drivers/net/e1000.c | 292
+++++++++++++++++++++++++++++++++++++---
drivers/net/e1000.h | 3 +
drivers/power/pmic/Makefile | 4 +-
drivers/power/regulator/Makefile | 2 +-
drivers/rtc/Kconfig | 6 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rx8010sj.c | 378
++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/ge_bx50v3.h | 190
+++++++++++---------------
include/configs/mx6_common.h | 3 -
include/configs/mx6sxsabresd.h | 8 +-
include/power/pmic.h | 1 +
66 files changed, 1370 insertions(+), 443 deletions(-)
create mode 100644 board/ge/common/ge_common.c
create mode 100644 board/ge/common/ge_common.h
create mode 100644 drivers/rtc/rx8010sj.c
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list