[U-Boot] [PATCH 08/13] board: ti: am574x-idk: Add hw data support
Lokesh Vutla
lokeshvutla at ti.com
Mon Dec 18 09:34:20 UTC 2017
Update prcm, voltages support for am574x-idk.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/include/asm/omap_common.h | 1 +
board/ti/am57xx/board.c | 9 ++++++---
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 9624fb81fa..5710136e88 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -597,6 +597,7 @@ extern struct prcm_regs const dra7xx_prcm;
extern struct dplls const **dplls_data;
extern struct dplls dra7xx_dplls;
extern struct dplls dra72x_dplls;
+extern struct dplls dra76x_dplls;
extern struct vcores_data const **omap_vcores;
extern const u32 sys_clk_array[8];
extern struct omap_sys_ctrl_regs const **ctrl;
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 082346d2b1..2d14ae54fe 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -535,7 +535,7 @@ invalid_eeprom:
void vcores_init(void)
{
- if (board_is_am572x_idk())
+ if (board_is_am572x_idk() || board_is_am574x_idk())
*omap_vcores = &am572x_idk_volts;
else if (board_is_am571x_idk())
*omap_vcores = &am571x_idk_volts;
@@ -548,6 +548,8 @@ void hw_data_init(void)
*prcm = &dra7xx_prcm;
if (is_dra72x())
*dplls_data = &dra72x_dplls;
+ else if (is_dra76x())
+ *dplls_data = &dra76x_dplls;
else
*dplls_data = &dra7xx_dplls;
*ctrl = &dra7xx_ctrl;
@@ -688,7 +690,7 @@ void recalibrate_iodelay(void)
int pconf_sz, iod_sz, delta_iod_sz = 0;
int ret;
- if (board_is_am572x_idk()) {
+ if (board_is_am572x_idk() || board_is_am574x_idk()) {
pconf = core_padconf_array_essential_am572x_idk;
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
iod = iodelay_cfg_array_am572x_idk;
@@ -995,7 +997,8 @@ int board_eth_init(bd_t *bis)
writel(ctrl_val, (*ctrl)->control_core_control_io1);
/* The phy address for the AM57xx IDK are different than x15 */
- if (board_is_am572x_idk() || board_is_am571x_idk()) {
+ if (board_is_am572x_idk() || board_is_am571x_idk() ||
+ board_is_am574x_idk()) {
cpsw_data.slave_data[0].phy_addr = 0;
cpsw_data.slave_data[1].phy_addr = 1;
}
--
2.15.1
More information about the U-Boot
mailing list