[U-Boot] [PATCH v3 10/11] rockchip: evb-rk3229: add README file for OP-TEE support

[Kever Yang]

Detail of step by step to bring up the board with OP-TEE support.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

Changes in v3: None
Changes in v2: None

 board/rockchip/evb_rk3229/README | 72 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 board/rockchip/evb_rk3229/README

diff --git a/board/rockchip/evb_rk3229/README b/board/rockchip/evb_rk3229/README
new file mode 100644
index 0000000..46c54c2
--- /dev/null
+++ b/board/rockchip/evb_rk3229/README
@@ -0,0 +1,72 @@
+Get the Source and prebuild binary
+==================================
+
+  > mkdir ~/evb_rk3229
+  > cd ~/evb_rk3229
+  > git clone git://git.denx.de/u-boot.git
+  > git clone https://github.com/OP-TEE/optee_os.git
+  > git clone https://github.com/rockchip-linux/rkbin.git
+  > git clone https://github.com/rockchip-linux/rkdeveloptool.git
+
+Compile the OP-TEE
+===============
+
+  > cd optee_os
+  > make clean
+  > make CROSS_COMPILE_ta_arm32=arm-none-eabi- PLATFORM=rockchip-rk322x
+  Get tee.bin in this step, copy it to U-Boot root dir:
+  > cp out/arm-plat-rockchip/core/tee-pager.bin ../u-boot/tee.bin
+
+Compile the U-Boot
+==================
+
+  > cd ../u-boot
+  > export CROSS_COMPILE=arm-linux-gnueabihf-
+  > export ARCH=arm
+  > make evb-rk3229_defconfig
+  > make
+  > make u-boot.itb
+
+  Get tpl/u-boot-tpl.bin, spl/u-boot-spl.bin and u-boot.itb in this step.
+
+Compile the rkdeveloptool
+=======================
+  Follow instructions in latest README
+  > cd ../rkdeveloptool
+  > autoreconf -i
+  > ./configure
+  > make
+  > sudo make install
+
+  Get rkdeveloptool in you Host in this step.
+
+Both origin binaries and Tool are ready now, choose either option 1 or
+option 2 to deploy U-Boot.
+
+Package the image
+=================
+
+  > cd ../u-boot
+  > tools/mkimage -n rk322x -T rksd -d tpl/u-boot-spl.bin idbloader.img
+  > cat spl/u-boot-spl.bin >> idbloader.img
+
+  Get idbloader.img in this step.
+
+Flash the image to eMMC
+=======================
+Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
+  > cd ..
+  > rkdeveloptool db rkbin/rk32/rk322x_loader_v1.04.232.bin
+  > rkdeveloptool wl 64 u-boot/idbloader.img
+  > rkdeveloptool wl 0x4000 u-boot/u-boot.itb
+  > rkdeveloptool rd
+
+Flash the image to SD card
+==========================
+  > dd if=u-boot/idbloader.img of=/dev/sdb seek=64
+  > dd if=u-boot/u-boot.itb of=/dev/sdb seek=16384
+
+You should be able to get U-Boot log message with OP-TEE boot info.
+
+For more detail, please reference to:
+http://opensource.rock-chips.com/wiki_Boot_option
-- 
1.9.1